· REAL MODEM UPGRADE TECHNOLOGY ·
Bring to your attention one more
pribambasinu to your modem. In the first
issue we have already told you about a signal booster telephone
line, and now it's time to tell you about the very
fundamentally different lronburg that
will allow you to get rid of any noise
and clicks on the line, arising due to the induced electricity.
Just want to tell you that the author of this text is unknown,
but the text was racked from the depths of the Internet.
That's all that I (Shaitan / SoK) wanted to say about it. And
now give the floor to our unknown
author, but first give your attention the scheme of the device.
R1
C1
T1 * T2 *
O \ / \ / \ / \ / \ / \ / \ / \ / o
ATS R2 Modem
O / \ / \ / \ / \ / \ / \ / \ / \ o
*
C2
Entry
~~~~~~~~~~
So we are on the verge of great discoveries. Our eyes make the
technological revolution - modems have become so perfect that
it is time to improve their telephone lines. Not to think that
it is very difficult - you it is now also under strength, so we
developed and tested a new device that extends the ability of
your phone line.
Principle of operation
~~~~~~~~~~~~~~
Transformer T1 is designed for high performance filtration high
interference. This allows us to successfully confront the
appearance of interference due to operation of electrical
appliances and such bad thing as laying parasitic interference
radio transmission network in your apartment or office.
Plot scheme, collected on the passive
elements R1, C1 - R2, C2, is
for frequency correction of the input signal. As we know from
the course of circuit theory, telephone line is a natural
analogue of the so-called long-line,
work which at one time studied the Lord
Kelvin in the design of the communication line
between America and Europe. Long line
applies to circuits with distributed parameters and the
specified area as the scheme brings the kind of signal to the
original. And finally, transfrmator T2 performs
important function of the passive amplifier signal.
Ergo, we got a cheap and practical
a device that improves the line parameters
Communication and beneficial effect on the quality of
faksmodemnoy communication.
Manufacturing & Parts
~~~~~~~~~~~~~~~~~~~~~
Transformer T1 contains 2 independent
winding to 7 turns each, and wound on the ferrite ring
rigorously symmetrical, ie both windings are wound roughly
clockwise. Wire - coating, approximately 0.5 mm in
diameter.
Resistance R1, R2 - 10 .. 50 ohms, which
determined empirically and depends on the length of the line
from the PBX to your telephone wall socket, which includes a
modem. Capacitors C1, C2 - 0.1 microfarads.
Transformer T2 has 2 independent
winding turns of each of 30-60, and
wound on the ferrite ring rigorously
asymmetric, ie windings are wound in
different directions. Wire - varnishing
approximately 0.5 mm in diameter.
Try to place the transformers T1 and T2 away from each other -
this improve the overall performance of the apparatus.
STE truncated wrote not me! But the thing .....
cool ..... ispytavayu ...... Duc .... less glitches and
vaaasche ....;) Collecting! Attempt - it has not yet been
torture! ;-)
