Category "IS-DOS - the programmers." No 2
Eliseev VA
"The window system IS-DOS"
(Journal version)
(C) PENCRAFT 1995
(C) IskraSoft 1995
Continued from the No 1.
_________________________________________
Restarts printing.
The next major operation - print text messages - is
presented in IS-DOS system, the whole group of restarts,
differing mainly in a manner
set the initial parameters and some
additional capabilities.
In total, the level WIND.SYS
There are 7 restarts relating to the process of print texts.
The first three of them characterized using as
coordinates printing of the information contained
in the vector window (Print pos, Print size,
Y-coord). Almost three restart
constitute a program with three points of entry for setting
various parameters.
lwt (# 65)
lwt (# 65) - allows you to print in
window specified number of rows from a text buffer with indent
on Y from the upper edge of the window.
Input parameters:
C - code restart (# 65)
IX - the address of the vector window
HL - address of text buffer
A - the value of the indentation on the top of the Y
window border
B - number of printed lines
The format of the text buffer for lwt is standard for most
restarts printing in IS-DOS: characters are placed
sequentially, starting from the first location in the direction
of increasing addresses, lines are separated by the symbol code
# 0D, handle end of the text - the character with code # 03.
When working lwt marker # 03 is not necessary, since the
printed text is limited to a specified number of rows. However,
If the marker # 03 will meet in the text to how will print the
required number of lines, printing stops. Newline characters,
too, are not mandatory, since reaching the right edge of the
window printing continues with the next
row, and row count takes into account
this is so regardless of the characters # 0D box is printed the
specified number of rows. The rest of the the text is cropped.
If the specified number of rows exceeds the size of the
window, the text continues to be displayed outside.
When working restart lwt saved
unaltered contents of the register IX and in the register pair
HL.
Consider this example:
;****************************************
; Listing 4 Example lwt (# 65)
ORG # 5D64
; Opening windows
CALL CLS
LD IX, WIND1
LD C, # 1961
LD A, 2
RST # 10
LD IX, WIND2
LD C, # 1961
LD A, 0
RST # 10
CALL WAIT
; Printing lines of text from the clipboard in window 1
LD IX, WIND1; address vector window
LD HL, TEXT1; address text
LD C, # 65; code restart
LD A, 1; indented with Y
LD B, 4 rows
RST # 10
CALL WAIT
; Printing lines of text from the clipboard in window 2
LD IX, WIND2
LD HL, TEXT2
LD C, # 1965
LD A, 1
LD B, 4
RST # 10
CALL WAIT
JP EXIT
; Vectors windows
WIND1 DEFB 5
DEFB 2
DEFB 8
DEFB 20
DEFB% 00001111
DEFB% 00000001
DEFB 8
DEFB 20
WIND2 DEFB 5
DEFB 12
DEFB 8
DEFB 20
DEFB% 00001111
DEFB% 00000001
DEFB 8
DEFB 20
; Text buffers
TEXT1 DEFM "Restart lwt (65)"
DEFB 13
DEFM "allows you to print"
DEFB 13
DEFM "in the text box of"
DEFB 13
DEFM "text buffer."
DEFB 13
TEXT2 DEFM "in the register B is set to"
DEFB 13
DEFM "rows"
DEFB 13
DEFM "want"
DEFB 13
DEFM "print"
DEFB 13
; Additional procedures
CLS LD C, # 73; restart cls
RST # 10; to clear the screen
RET
WAIT LD C, # 07; restart ttyin
RST # 10; to wait for the clicking
RET; Tia Keys
EXIT XOR A; standard output
LD A, # F4; in the IS-DOS
RET
;****************************************
The output is Listing 1
see Fig. 4.
Restart lwt (# 65)
to print
in the text box of
Text Buffer
in the register B is set
number of rows
which is necessary
print
Fig. 4: Printing text in the box lwt (# 65)
adrwt (# 66)
adrwt (# 66) - is designed to
print in the text box located
immediately after the vector window.
Input parameters:
C - code restart (# 66)
IX - the address of the vector window
Restart adrwt very convenient for printing windows with
text, tightly bound to specific window. Its main advantage
- Only one input parameter (not counting
code itself restart in case C).
For text output on the screen adrwt uses the same procedure
as lwt, so all that was said about text format for lwt, valid
for adrwt. Upon reaching the bottom of the window
printing stops and the rest
text is ignored.
When working restart adrwt content
Register IX is retained.
Example:
;****************************************
; Listing 5 Printing with adrwt (# 66)
ORG # 5D64
; Opening windows
CALL CLS
LD IX, WIND1
LD C, # 1961
LD A, 2
RST # 10
LD IX, WIND2
LD C, # 1961
LD A, 0
RST # 10
CALL WAIT
; Printing lines of text in window 1
LD IX, WIND1; address vector window
LD C, # 66; code restart
RST # 10
CALL WAIT
; Printing lines of text in window 2
LD IX, WIND2
LD C, # 1966
RST # 10
CALL WAIT
JP EXIT
; Vectors windows
WIND1 DEFB 5
DEFB 3
DEFB 7
DEFB 20
DEFB% 00001111
DEFB% 00000001
DEFB 8
DEFB 20
The text window 1
DEFM "Restart adrwt (66)"
DEFB # 0D
DEFM "allows you to print"
DEFB # 0D
DEFM "text following"
DEFB # 0D
DEFM "vector for the window."
DEFB # 03
WIND2 DEFB 5
DEFB 12
DEFB 7
DEFB 20
DEFB% 00001111
DEFB% 00000001
DEFB 8
DEFB 20
The text window 2
DEFM "Lines are separated by"
DEFB # 0D
DEFM "symbol with a code # 0D"
DEFB # 0D
DEFM "end of the text -"
DEFB # 0D
DEFM "symbol with the code # 03" "
DEFB # 03
; Additional procedures
CLS LD C, # 73; restart cls
RST # 10; to clear the screen
RET
WAIT LD C, # 07; restart ttyin
RST # 10; to wait for the clicking
RET; Tia Keys
EXIT XOR A; standard output
LD A, # F4; in the IS-DOS
RET
;****************************************
lenwt (# 67)
lenwt (# 67) - also designed to
print text in the box but the text does not
assigned to the vector of a particular window, and can be
arbitrarily in the program.
The main advantage of the restart lenwt
- The ability to print one text
several windows, and vice versa - an opportunity
print different texts in one window.
Input parameters:
C - code restart
IX - the address of the vector window
HL - address of the text
When working restart lenwt content
Register IX and in the register pair HL is preserved.
Example:
;****************************************
; Listing 6 Print by lenwt (# 67)
ORG # 5D64
; Opening windows
CALL CLS
LD IX, WIND1
LD C, # 1961
LD A, 2
RST # 10
LD IX, WIND2
LD C, # 1961
LD A, 0
RST # 10
CALL WAIT
; Printing lines of text from the clipboard in window 1
LD IX, WIND1; address vector window
LD HL, TEXT; address text
LD C, # 67; code restart
RST # 10
CALL WAIT
; Printing lines of text from the clipboard in window 2
LD IX, WIND2
LD HL, TEXT
LD C, # 1967
RST # 10
CALL WAIT
JP EXIT
; Vectors windows
WIND1 DEFB 5
DEFB 3
DEFB 7
DEFB 20
DEFB% 00001111
DEFB% 00000001
DEFB 8
DEFB 20
WIND2 DEFB 5
DEFB 12
DEFB 7
DEFB 20
DEFB% 00001111
DEFB% 00000001
DEFB 8
DEFB 20
; Text buffer
TEXT DEFM "Restart lenwt (67)"
DEFB # 0D
DEFM "allows you to print"
DEFB # 0D
DEFM "the text being"
DEFB # 0D
DEFM "anywhere"
DEFB # 0D
DEFM "program"
DEFB # 03
; Additional procedures
CLS LD C, # 73; restart cls
RST # 10; to clear the screen
RET
WAIT LD C, # 07; restart ttyin
RST # 10; to wait for the clicking
RET; Tia Keys
EXIT XOR A; standard output
LD A, # F4; in the IS-DOS
RET
;****************************************
The output in Listing 6
shown in Fig. 5:
Restart lenwt (67)
to print
These appear
anywhere
program
Restart lenwt (67)
to print
These appear
anywhere
program
Fig. 5: Printing text lenwt (# 67)
...
...
prstr (# 68)
Restart prstr (# 68) - the most powerful and
universal of all restarts that are intended for printing lines
of text in the window. Its main advantage is the ability to
automatically align line to the left and right, as well as
centering line. Restart has 4 sub-functions, allowing to
set-printable string in different ways. Subfunction code placed
in the register E:
E = 0 - print lines on a logical
name defined in a special
array analyzer
E = 1 - print line of a given length,
contained at the address
E = 2 - the service sub-function, which is neither
Why not print, but it allows you
number of parameters for the previous
subfunctions, knowing the starting address
text buffer and line number
E = 3 - print line number on it
text - is actually
a combination of subfunctions 2 and 1
Manager subfunctions has "protection from
fool - if you set in the register E number greater than 3, it
will automatically be set to zero.
Now consider in more detail the work with application
restart prstr (# 68).
For a start - general provisions. When
call to restart in case A should be the number that defines two
basic print options - alignment mode
(The two most significant bits) and an offset in the Y from the
top of the window (six bits). Alignment mode is encoded as
follows as follows:
00 - left aligned
01 - left aligned
10 - right-aligned
11 - centering the line
When you work restart the contents of register A is not
preserved.
The format of the text buffer for prstr
standard - the characters are arranged sequentially, starting
from the first location, the rows are separated by the symbol #
0D, handle end of the text - # 03.
To display the characters on the screen prstr
uses restart ttyout (# 0A) from the level of
DOS.SYS. In forming the text buffer, indent and number printed
characters need to independently ensure that the text has not
gone beyond the window. With the width of the line, more than
field width print window is automatically aligned to the left
edge, regardless of the status of the two bits of the register
A.
Subfunction 0, as already reported above, allows you to
print lines from a text buffer on their logical names. What is
it?
Suppose you want to print
box to the text containing the repetitive line. Instead of
repeatedly call prstr, each time asking all parameters and are
strictly making sure that any of the following lines of print,
or that even worse, scoring a text buffer identical strings,
you can just make an array, which will be installed sequence of
printing lines by links to their serial numbers in the buffer.
Quickly switching the different arrays, you
can easily rearrange your texts, swap lines, insert
others, etc. Using subfunction 0
It is also easy to organize the printing of text messages on
the code from the table (like error messages in Spectrum
BASIC).
Input parameters:
C - code restart (# 68)
E - subfunction code (0)
IX - the address of the vector window
HL - address of the array analyzer
A - mode alignment and indentation on the Y
(See above)
B - logical name of the line - any code
except # FF
Output at normal termination
of HL register contains a number, one less than the address of
first character line following the printed, remains unchanged
contents of register IX, contents of registers A, B, C, E - is
lost. Restart prstr also modifies the system variable xypos
(see the vector character of the output device).
Possible errors:
1. If the logical name string is not found in the array
analyzer, then restart returned to the calling program with C
flag set and error code 140 (No name in the array) in register
A.
2. If the text does not contain a line with a serial number
listed in the array Restart returns with flag set C and an
error code 141 (no line in text) in register A.
Mass analyzer has the following
structure: the first two bytes - the address of text buffer,
then - and double-byte records in which the first byte -
Boolean string name, and the second - its number in the buffer.
Completes the array of required code # FF.
Consider an example. View on the screen frame of the stars
in two different versions for two windows (see Figure 6).:
*************************
*
*
*************************
*
*
*
*
*************************
*************************
*
*
*
*************************
*
*
*
*************************
Fig. 6: Frames from stars to
demonstration prstr
To draw these two frameworks using subfunction 0 restart
prstr needed only 4 types of lines:
1. "*************************"
2. "*"
3. "*"
4. "*"
Composes a program that performs this
problem:
;*****************************************
; Listing 7 Printing with
; Subfunction 0 restart prstr
ORG # 5D60
; Opening windows
CALL CLS; clear screen
LD IX, WIND1; open window 1
LD C, # 1961
LD A, 2
RST # 10
LD IX, WIND2; open the window 2
LD C, # 1961
LD A, 0
RST # 10
; Print the first frame
LD IX, WIND1; address vector window
LD HL, TABL1; array address
CALL PRINT; procedure call
; Print text
; Print the second frame
LD IX, WIND2
LD HL, TABL2
CALL PRINT
CALL WAIT; waiting for the keys
JP EXIT; output in the IS-DOS
; How to print
PRINT LD B, # 09; the number of rows, a cat.
; Need Raspe
; Chat simultaneously
; Simultaneously - a logical
The name of the first row
; Alignment mode - in the center,
; Indent - 1 Line
LD A,% 11000001
M1 PUSH HL; save on the stack
; Array address
PUSH AF; save on the stack
; Alignment mode
, And the current value
; Indentation in Y
LD C, # 68; code restart
LD E, # 00; subfunction code
RST # 10; call restart
POP AF; removed from the stack
, The current value
; Indent
INC A; increase it by 1
; To print the following
; Ing line
POP HL; restore HL
; Array address
DJNZ M1; repeat until
, The value of B is not
; Reduced to 0
, Value B also serves as the counter
; In a series of print and the logical name is obvious;
anterior printed line
RET; return to the main
; Program
; Vectors windows
WIND1 DEFB 0
DEFB 0
DEFB 11
DEFB 30
DEFB% 00001111
DEFB # FF
DEFB 3
DEFB 38
WIND2 DEFB 0
DEFB 12
DEFB 11
DEFB 30
DEFB% 00001111
DEFB # FF
DEFB 3
DEFB 38
; Text buffer
TEXT DEFM "*************************"
DEFB # 0D
DEFM "* *"
DEFB # 0D
DEFM "* * *"
DEFB # 0D
DEFM "* * * *"
DEFB # 0D
DEFB # 03
; Arrays analyzers
TABL1 DEFW TEXT
DEFB # 09
DEFB 1
DEFB # 08
DEFB 3
DEFB # 07
DEFB 3
DEFB # 06
DEFB 1
DEFB # 05
DEFB 2
DEFB # 04
DEFB 2
DEFB # 03
DEFB 2
DEFB # 02
DEFB 2
DEFB # 01
DEFB 1
DEFB # FF
TABL2 DEFW TEXT
DEFB # 09
DEFB 1
DEFB # 08
DEFB 4
DEFB # 07
DEFB 4
DEFB # 06
DEFB 4
DEFB # 05
DEFB 1
DEFB # 04
DEFB 3
DEFB # 03
DEFB 3
DEFB # 02
DEFB 3
DEFB # 01
DEFB 1
DEFB # FF
; Additional procedures
CLS LD C, # 73, clear screen
RST # 10
RET
WAIT LD C, # 07; waiting for the keys
RST # 10
RET
EXIT XOR A; standard output
LD A, # F4; in the IS-DOS
RET
;****************************************
Subfunction 1 allows you to print
string of given length, which is stored in memory at that
address. This subfunction calculates the coordinates of
printing a string, given the number of characters, indent mode
alignment and width of the print margins. When She uses the
same procedure, that subfunction 0, so for the same size as the
window size of the text must follow their own.
After calculating the coordinates of a sub-function is the
same restart ttyout (# 0A) in the loop as long as
will print the required number of
characters.
Input parameters:
C - code restart (# 68)
E - subfunction code (# 01)
IX - the address of the vector window
HL - address of the start line
B - length of string
A - alignment mode, and padding in the Y
The length of the printed line is determined
only the value of register B. Newline # 0D, in this case is
replaced by a space, the remaining characters codes is less
than # 20 is not recommended in order to avoid "garbage" screen.
Example of using subfunction 1:
;****************************************
; Listing 8 Example of printing with
; Prstr (# 68) Subfunction 1
ORG # 5D64
, Opening a window
CALL CLS
LD IX, WIND
LD C, # 1961
LD A, 2
RST # 10
CALL WAIT
; Print a line of text from the clipboard window
; By Subfunction 1
LD IX, WIND; vector window
LD C, # 68; code restart
LD E, 1; subfunction code
LD HL, TEXT1; address line
LD A,% 11000010
And two bits of the - alignment mode
, (In this case - centering)
And six junior - space from above (2 lines)
LD B, 30; the number of characters
; In a row
RST # 10; call restart
CALL WAIT
; Print next line
LD IX, WIND; vector window
LD C, # 68; code restart
LD E, 1; subfunction code
LD HL, TEXT2; starting address
; Line
LD A,% 11000100
; Printing without alignment and indentation
; Top - 4 lines
LD B, 36, the number of characters
; In a row
RST # 10; call restart
CALL WAIT
JP EXIT
And the vector window
WIND DEFB 1
DEFB 1
DEFB 8
DEFB 30
DEFB% 00001111
DEFB% 00000001
DEFB 3
DEFB 38
; Text buffer
TEXT1 DEFM "Restart prstr (68)"
DEFM "subfunction 1
TEXT2 DEFM "print lines in the window
DEFM "aligned"
; Additional procedures
CLS LD C, # 73, clear screen
RST # 10
RET
WAIT LD C, # 07; waiting for the keys
RST # 10
RET
EXIT XOR A; standard output
LD A, # F4; in the IS-DOS
RET
;****************************************
Subfunction 2 allows us to calculate
input parameters for the subfunction 1 (address and length of
the string) to its number in the text buffer.
Input parameters:
C - code restart (# 68)
E - subfunction code (# 02)
HL - address of the beginning of the text
B - line number
Output parameters:
HL - address of string
B - length of string
The contents of registers C and E are not conserved. Text
format - a standard. If value of line number exceeds the number
of lines in the text, restart returns with flag set C and an
error code 141 (no line in the text) in register A.
...
...
Example of using subfunction 2:
;****************************************
; Listing 9 Example
; Prstr (# 68), subfunction 2
ORG # 5D64
, Opening a window
CALL CLS
LD IX, WIND
LD C, # 1961
LD A, 2
RST # 10
CALL WAIT
; An example of a subfunction 2
; Determine the parameters for a subfunction
; On the famous line number in the text
LD C, # 68; code restart
LD E, 2; code subfunction 2
LD HL, TEXT; starting address
; Text
LD B, 1; line number
RST # 10
; Output in HL '- string address
, And B - Length
EXX
LD C, # 1968
LD E, 1; code Subfunction 1
LD A,% 11000001
RST # 10
LD C, # 1968
LD E, 2; definition
LD HL, TEXT; parameters trail.
LD B, 2 rows
RST # 10
EXX
LD C, # 1968
LD E, 1; print
LD A,% 11000011
RST # 10
LD C, # 1968
LD E, 2
LD HL, TEXT
LD B, 3
RST # 10
EXX
LD C, # 1968
LD E, 1
LD A,% 11000101
RST # 10
CALL WAIT
JP EXIT
And the vector window
WIND DEFB 1
DEFB 1
DEFB 8
DEFB 30
DEFB% 00001111
DEFB% 00000001
DEFB 3
DEFB 38
; Text buffer
TEXT DEFM "Restart prstr (68)"
DEFM "subfunction 2"
DEFB # 0D
DEFM "defines the parameters for"
DEFB # 0D
DEFM "subfunction 1
DEFB # 0D
DEFB # 03
; Additional procedures
CLS LD C, # 73, clear screen
RST # 10
RET
WAIT LD C, # 07; waiting for the keys
RST # 10
RET
EXIT XOR A; standard output
LD A, # F4; in the IS-DOS
RET
;****************************************
Subfunction 3 - a combination of subfunctions
2 and 1. The input parameters used the start address of text
and line number in it.
First sub-function 3 with two subfunctions computes
addresses and length of the string, after which control is
transferred to a subfunction.
Input parameters:
C - code restart (# 68)
E - subfunction code (# 03)
IX - the address of the vector window
HL - address of the beginning of the text
B - number of rows
A - alignment mode, and padding in the Y
As in the subfunction 2, in the absence of
text string with a specified serial number leads to a return to
the calling program with C flag set and error code 141 (no line
in the text) in register A.
Example of using subfunction 3:
;****************************************
; Listing 10 Example
; Prstr (# 68), subfunction 3
ORG # 5D64
, Opening a window
CALL CLS
LD IX, WIND
LD C, # 1961
LD A, 2
RST # 10
CALL WAIT
; Printing lines of text from the clipboard window
; A subfunction 3
LD IX, WIND; vector window
LD C, # 68; code restart
LD E, 3; subfunction code
LD HL, TEXT; starting address
; Text
LD A,% 11000010
; Seal with centering and indent
; Top - 2 lines
LD B, 1; line number
; In the text
RST # 10; call restart
CALL WAIT
LD IX, WIND; vector window
LD C, # 68; code restart
LD E, 3; subfunction code
LD A,% 11000101
LD B, 2; seal
RST # 10; rows in the
CALL WAIT
JP EXIT
And the vector window
WIND DEFB 1
DEFB 1
DEFB 8
DEFB 30
DEFB% 00001111
DEFB% 00000001
DEFB 3
DEFB 38
; Text buffer
TEXT DEFM "Restart prstr (68)"
DEFM "subfunction 3
DEFB # 0D
DEFM "print string to number"
DEFB # 0D
DEFB # 03
; Additional procedures
CLS LD C, # 73, clear screen
RST # 10
RET
WAIT LD C, # 07; waiting for the keys
RST # 10
RET
EXIT $ XOR A; standard output
LD A, # F4; in the IS-DOS
RET
;****************************************
The next two restarts are
to print on the screen in absolute coordinates, not tied to a
particular window.
str (# 6C)
Restart str (# 6C) - print the current
position of the screen line, limited code
# 0D. String address is given in the register pair HL. This
restart is convenient for printing lines on the screen outside
the windows, does not require the assignment of coordinates,
and uses the current print position, which is stored in the
system variable XYPOS.
Restart str - it is just cyclical appeal to the already
mentioned above, restart ttyout (# 0A) from the level of
DOS.SYS, carried out as long as does not meet code newline # 0D.
To determine the coordinates of printing uses a system variable
XYPOS, located in the vector character of the output device.
Access to this variable can be obtained using restarts wtpos (#
6B) and prapd (# 0C), as several later.
When working restart str newline is considered only as
text qualifier, and the real translation
line when printing is performed. It should be noted that the
size of the print margins in the call str limited to one third
of the screen - top, middle or bottom, namely, the one within
which the current print position to call. Upon reaching the
right edge of the screen printing on the next line, the latter
character may be "broken" when moving and when the the lower
boundary of the corresponding third of the screen print is
transferred to the first of eight rows of the third.
Input parameters:
C - code restart (# 6C)
HL - address of string
XYPOS - a system variable - current
print position.
Example:
;****************************************
; Listing 11 Example of str (# 6C)
ORG # 5D64
CALL CLS; clear screen
LD HL, TEXT1; address text
LD C, # 6C; code restart
RST # 10; print line
CALL WAIT
LD HL, TEXT2; second printing
LD C, # 6C; line
RST # 10
CALL WAIT
LD HL, TEXT3; print thirds
LD C, # 6C; line
RST # 10
CALL WAIT
JP EXIT
; Text buffer
TEXT1 DEFM "Restart str (# 6C)"
DEFB # 0D
TEXT2 DEFM "allows you to print"
DEFB # 0D
TEXT3 DEFM "the absolute"
DEFM "coordinates"
DEFB # 0D
; Additional procedures
CLS LD C, # 73; restart cls
RST # 10, for cleaning the screen
RET
WAIT LD C, # 07; restart ttyin
RST # 10; to wait for the clicking
RET; Tia Keys
EXIT XOR A; standard output
LD A, # F4; in the IS-DOS
RET
;****************************************
lnstr (# 6D)
Restart lnstr (# 6D) - as well as
previous appeal to the cycle of
ttyout (# 0A), but prints only the specified number of
characters. Coordinates Printing is also stored in the system
variable XYPOS.
Input parameters:
C - code restart (# 6D)
HL - address of text string
B - number of characters
XYPOS - a system variable - current
print position.
When printing newlines
# 0D replaced with spaces, others characters with codes less #
20 does not apply recommended. As in the case of str, the field
is limited to print one of the thirds screen.
For the coordinates of a system variable XYPOS use restarts
prapd (# 0C) of the level and DOS.SYS wtpos (# 6B).
Example:
;****************************************
; Listing 12 Example lnstr (# 6D)
ORG # 5D64
CALL CLS; clear screen
LD HL, TEXT; address text
LD C, # 6D $? Code restart
LD B, 81
RST # 10; print line
CALL WAIT
JP EXIT
; Text buffer
TEXT DEFM "Restart str (# 6C)"
DEFM "allows you to print"
DEFM "the absolute"
DEFM "coordinates"
; Additional procedures
CLS LD C, # 73; restart cls
RST # $ 10; for cleaning the screen
RET
WAIT LD C, # 07; restart ttyin
RST # 10; to wait for the clicking
RET; Tia Keys
EXIT XOR A; standard output
LD A, # F4; in the IS-DOS
RET
;****************************************
Another restart print tylin (# 71)
has a direct bearing on the work
line editor edstr (# 7F), therefore
it will be considered one of the following
articles in our categories.
To be continued ...
In the next issue of our magazine you will meet with fairly
large group subsidiary restarts, also included in the level
WIND.SYS. _________________________________________
