Do it yourself. To "Cast" party from LK / STR.
(C) LAZY KEEPER FROM STR. Nizhny Tagil in 1998.
Segodnenko I will tell you how juzat 3'5 drive after his
podrubki to a computer. Sometimes you need to 3'5 drive,
hanging on the B, was But due to some programok. Some advise to
make the switch. I would suggest the same thing, but not just a
switch, and switch integrated circuit, the trigger-logic (;-)).
On two most accessible mikrikah: KP11 and LA3 any TTL series
(preferably 555). Legs, marked as A and B, the hem in the gap
of the wires on the tail of the marking lines.
2
with A 0 mux
to about 5 N
of B 1 g and
la3: third leg w n April 11 and
4-th, l t 2 0 A with m
2-nd leg EXAMPLE July 14 to l
6 th. nd of the 3 1 B on e
r we can deduce
and l March 9 th r
e B 0 2 p
p 6 12 t
to / 1 and A - March 1
'10
March 2
2 of 13
3
April 1
oSE
15
c / 5 'of the OE
6
Rifle +5 kp11
la3
Contacts that are marked as "K" - is switching buttons.
"SD" - is the LED (any, I have a flat Chinese AL203).
"C" - resistance to 1k.
All this can be easily assembled. For the first time can be
collected on cardboard (well-proven cardboard, in which case
furniture packs. At school and in landfills (school = dump) it
usually in bulk), but then everything will be placed on the
sandwich chips companies.
This valuable device was assembled and tested by me
personally, come watch ;-).
(C) 17.11.98
SPARKS-TRADE, LAZY KEEPER
P.S. Do not forget the power chips: "+" - la3 14-I, kp11 16-I
"-" - La3 7-I, kp11 8-I feet.
P.P.S. Look no burn mikriki, controller and PC! ;-()
