Connecting the Controller IDE (c) Nemo.
(C) 2004 Terentyev D.
The story is, I bought his CD-ROM x8 almost for free (200
rub.) old such filthy fly, and I wanted to muse
chku polushat with good quality (48 kHz, 16 bit, stereo, one
word rulez). Unearthed a scheme controller Nemo, bought detalek,
a couple of times rushed into battle is a fee to breed, then
the circuit board collect, but the abundance of the conductors
and the lack of wires MGTF ostanav Lebanese me. The battle
lasted six months until they bought a collection of pin Roller
at (c) nedoPC Team (like properly configured) for 300 rus skih
dollars. Order arrived within two weeks or less above
(molodtsy!). As it turned out it was necessary to pay in
advance (I then thought COD), but I made an exception (which is
a I am exceptional;)) and sent COD.
The play is the same, act two: it remains to connect the
controller. For This parcel has been invested in the
instruction, to me, however, and so would Law is clear. I made
myself a slot vodvel signals, all but one Nogo - IORGE. Saving
for this for five minutes lost half an hour while thought: "Oh,
what would it ..... .... ... ....... ..... why do not pa bot?
". All have decided zabatsat IORGE ... on the resistor and then
started, then Claudia does not plow the controller, then all
the plowing, but somehow not stable. Tired of select resistor
and tormenting himself and processor, a signal made by the
normal, and once everything was fine.
Here is the scheme:
from the processor section
/ IORQ> X> / IORQ '
PCB
PC
R = 300
-600 Th
v v
/ IORQ / IORQCE
per slot
Scheme 1. The resistor.
per slot
/ IORQ / IORQCE
^ ^
GND
January 1
3> / IORQ 'on board
/ IORQ of> 2 computers
CPU
LL1
incision
X
Scheme 2. On a chip
Hooking up, everything works. Now copy the files from
sdromov, UNE Example Disk Virtual TR-DOS, or with other
software on the Spectrum. Imagine rulez, no need to go
somewhere, to copy any fi face, unpacked and play, or read a
newspaper. Slowly the truth, but For example, I was already
used - it's better than running around with a bunch of msdosov
skih floppy disks, especially since many ponastavili fucking
vyndouz XP is a disk so shitty work, sometimes 1.44 Thesis
Key does not read, what 720. Just listen to the music with
CD-AUDIO, with Conventional audioikov, though prog was not
under the control of these de Scrap, I wrote his, which
responds to all of the disk. For example, listening, listening
... took took a drive, shoved the other, all played on, and so
on and so forth read separately for this prog Rummy. In the
application and put all the needed utilities, more comfortable
working with sdromom.
Just trouble-free and hard drive, only now in use
dos scutes. If the HDD to SLAVE, then she did not see and hang.
A I have the drive and sdrom get along just like this:
HDD - slave;
CD-ROM-master.
Or just the hard drive and nothing else. Tortured (well, like
to me that would be visible in isdos sdrom, I'm under it the
same cd-player written) for a long time, and took corrected the
ide +3. blk a slave, who have the older version of the driver
please send us, I did Adjust the same.
The design of slot: I have set myself a slot without
buffering. In the future we plan to breed a fee of three slots
buffered than anything else. Sam took the connector from DENDY,
but the beam above to take them to the motherboard PC, ISA8 or
ISA16 (rather nitride tsatikontaktnuyu part, which is ISA8), so
their ipolnenie better and safer than DENDY.
That is, in principle, and the whole saga for connecting the
controller. Who interesting programming of this device, read
more articles on this topic in the next issue of the newspaper.
