ZAsm 3.10 for Scorpion's HDD

30 Jan 00 13:53, Ilya Vinogradov wrote to All:

IV> Recently, this rulez assembler has been brought to such an extent that it works transparently with
IV> Scorpov's HDD. That is, if an
IV image is connected to the drive, it loads from the screw, not through #3d13, but with turbocharging through my
IV> driver, which is twice as fast as function 5 rst8:db #81 ;) And if the
IV> image is not connected, then through the turboloader built into the ASM.

Rulez is intended!

IV> In general, if this is someone's thread if you need it, tell me. I can also provide
IV> the source code for the turboloader with the HDD, the definition of the screw
IV> itself (yes/no, in principle), plus also determining whether the disk image is connected to the drive
IV>... Here.

So let's do it like this: (until the moderator sees)

THE DAM ITSELF (in the sense of only the ZASM3.10.B file) PUSH HERE,
in archive, put the source code of what you modernized there -
this is so that the damned (kai users) can possibly remake it for themselves.

And let’s put the turbo driver for Scorpov’s screw here too, only
in another archive.

IV> By the way, you can combine the RAM disks of RealCommander and ZAsm'a! For
IV> this is necessary in the first sector of the zasm.exe file, at offset +#10

Yes, everything is possible there, it’s written in the description. But they are reluctant to pick...

... no day withoutspeccy!

Sun 30 Jan 2000 at 13:53, Ilya Vinogradov ═> All:

IV> Scorpovsky works transparently. That is, if an image is connected to the drive, it
IV> loads from the screw, not through #3d13, but with turbocharging through my driver
IV>, which is twice as fast as function 5 rst8:db #81 ;)

twice as fast - how much is that? :)

[ WBR, Oleg. ]
[ 12:02 1 February XXXV A.S. ]

IV> Just recently I brought this rulez assembler to such an extent that it works transparently with
IV> Scorpov's HDD. That is, if an
IV> image is connected to the drive, it loads from the screw, not through #3d13, but with turbocharging through my
IV> driver, which is twice as fast as function 5 rst8:db #81 ;) And if the
IV> image is not connected, then through the turboloader built into the ACM.

02 Feb 00 08:23, Roman Milukov wrote to Ilya Vinogradov:

IV>> the image is connected - it loads from the screw, not through #3d13, but with
IV>> turbocharging through my driver, which is faster than function 5
IV>> rst8:db #81 two times ;) A If the image is not connected, then through
IV>> the turboloader built into the ACM. In general, if anyone needs this
IV>> - tell me. I can also provide

RM> Can you make it work with images on a Nemov screw?

And if it is segmented? Yes and h.z. How does your IS driver of the screw
calculate the coordinates? Those. you need to use your screw driver from isdos
and also collect from a map of the correspondence between the file block and the device block for
segmented files.

RM> And make a driver that could be built into the commander (HPM, for example
RM> for example, from MADROM), so that it has a non-Mov screw worked, can you?

Similarly.

07 January 2000 (and it was then 15:24)
Ilya Vinogradov in his letter to Roman Milukov wrote:

IV> It seems easier to make it (ZAsm) work with Kay'evsky
IV> RamDisk...

To do this, you just need to implement the function of working with all drives,
via #3D13. This number will work on all devices. And if you don’t like
speed, you can make a switch - turboloader or #3D13.

Long life and prosperity to you, Ilya!

Sincerely, Musa Khaybullin