question
ZXNet echo conference «real.speccy»
04 Jan 00 (and it was 00:34 then)
Evgeny Bezukladnikov in his letter to All wrote:
E> One friend put together a circuit diagram for connecting an interior modem. The modem was on the ROCWELL chipset without correction with the v32 protocol, speed 14400. It worked, but without correction it does not work (all sorts of glitches on the screen). I brought my USR
E> Sportster 14400, also an interior, but it didn't work for him. ROCWELL without
E> PNP, and USR with it. Subject, why? If there are new schemes or something else, then please
E> throw it in!
On Rockwell, look in the settings - it should be “&M5” - the connection
is disconnected without error correction, i.e. Connect 14400/V32 None will no longer exist! In general,
do “AT$”, “AT&$”, “ATS$” in the terminal - the modem will issue help with commands.
E> Sincerely, Evgeny January 04, 2000
Sincerely, Darth Vader/ Orion'2000 04 Jan 00
[TEAM GUITAR] [TEAM Babylon #5] [TEAM Gaza Strip-BEST!] [TEAM ... Not drinking in Russia is better than not drinking!
[TEAM Hard Rock & Metall - RULEZ!!]
This subject:
One friend put together a circuit diagram for connecting an interior modem. The modem was on the
ROCWELL chipset without correction with the v32 protocol, speed 14400. It worked, but without
correction it does not work (all sorts of glitches on the screen). I brought my USR Sportster
14400, also an interior one, but it didn't work for him. ROCWELL without PNP, and USR with
it. Subject, why? If there are new schemes or anything else, please post them!
On Tuesday January 4, 2000 at 00:34:00 Evgeny Bezukladnikov wrote a letter to All on
the topic “question”.
I decided to add my opinion there too.
EB> work. ROCWELL without PNP, and USR with it. Subject, why? If
EB> there are new schemes or something else, then please post!
hmm, sorry, but even I know that pnp momeds (like win) do not
get under spec...
Good luck to you, Evgeny Bezukladnikov !
Anton Kriwoshea aka $k1v/M7H (orp.'99.
Tuesday January 04 2000 00:34, Evgeny Bezukladnikov ─── All:
EB> One friend put together a circuit diagram for connecting an interior modem. The modem was on
EB> ROCWELL chipset without correction with v32 protocol, speed 14400.
You're driving! Without correction there were only up to 2400. Even those modems for 2400, which
can now be obtained - all with correction.
EB> It worked, but without correction it doesn’t work (all sorts of glitches on the screen).
Didn’t you try to “clean” the line?
And in general, are you sure that the connection was like this - “CONNECT” 14400/NONE" ?
Maybe it’s all about the unbuffered data bus and large interference?
EB> ROCWELL without PNP, and USR with it. Subject, why?
Ah, because of PnP just...
Good luck! Evgeny. (Aka 2:5057/18.73) ■ The night is shorter than the day... The day will kill me... The world of illusions burns down in it. (C) Aria.
EB> The modem was on the ROCWELL chipset without correction with the
EB> v32 protocol, speed 14400. It worked, but without correction it does not
EB> work (all sorts of glitches on the screen).
Yes, there are always problems with this ;(
EB> I brought my USR Sportster 14400, also internal, but it
EB> did not work for it. ROCWELL without PNP, and USR with it.
EB> Subject, why? If there are new circuits or something else, then please
EB> post it!
Unfortunately, the circuit will not help, it’s not the PNP modem that is needed on Specky.
Long life and prosperity to you, Evgeny!
With best wishes, Musa Khaybullin.
4.01.2000 at 22:48 Max Dudnikov wrote to Evgeny Bezukladnikov:
MD> On Rockwell, look in the settings - it should be “&M5” - disconnect
MD> connection without error correction, i.e. Connect 14400/V32 None will no longer exist! In general, do “AT$”, “AT&$”, “ATS$” in the terminal - the modem
MD> will give you help with the commands.
Congenial! Since when does &M5 include rockwell correction? \N2, dear.
He doesn’t know how to AT$, etc. You can try AT\S
Respectfully, Vladimir.
*AKA*
... "...And there is a lot more that I don’t know" (c) Skryab≈n