Vega commander — ZXNet «real.speccy»

From Alexandr Tkachev To All 28 January 2004

Hello All
Does the subject work with two screws?
Only the master doesn’t want to see it point-blank, I tried to register the geometry
by hand in the config, still only the master, what should I do?
Dance with a tambourine or maybe the screws are not friendly with each other?
(one Conner pheripearl 82mb second Seagate st32122a 2.1Gb)

Bye

From Vlad Sotnikov To All 30 January 2004

Hello, Alexandr!

January 28, 2004 (and it was 10:37 pm then)
Alexandr Tkachev in his letter to All wrote:

AT> Does the subject work with two screws?

Yeah...

AT> Only the master doesn’t want to see it point-blank, I tried the geometry
AT> by hand in the config there is still only a master, what should I do?
AT> Are you dancing with a tambourine or maybe the screws are not on friendly terms with each other?
AT> (one Conner pheripearl 82mb the second Seagate st32122a 2.1Gb)

Are your jumpers set correctly? And what happens when you press SS+I: zero
reaction or does the program hang? And by the way, what is your version? 2.2 without letters don't
use: copying discs is buggy...

Vega/ex-Style Group.

FIDO: 2:5030/1512 ZXNET: 500:812/19 E-mail: veg...@mail.ru ICQ: 144932679

From Alexandr Tkachev To All 1 February 2004

VS> Are your jumpers set correctly?

Yes, on the offtopic they work normally in pairs.

VS> And what happens when you press SS+I: zero reaction or does the program hang?
Hangs

VS> And, by the way, what version do you have? Don't use 2.2 without
VS> letters: copying disks is buggy...

Got it.

Bye