PkUnzip

This is what I want to say about the subject 1.30f
It now has a couple of shortcomings

1. If you enlarge the window with the drives a little, you can insert the inscription
"SAME" or "DIFF" there and then you can switch the "Same Disk" "Different
Disks" modes to the same disk, it will be more convenient to unpack files.

Now: - A >> B -
It is necessary - A diff B -

IMHO this will be more convenient

2. The Free window hangs like a dead weight... If you unpack to another disk, then
absolutely unnecessary information
is shown about the free space on the source disk.

It is necessary that after recording a file in the Free window the free
space on the Destination disk is shown

▒▒▓▓▓ ▄▀█▀▀▀ Jerri / Alien Factory \ZX/

AM> But we’ll fix this.

AM> In fact, Tigrr's computer was in
AM> inoperative for about a month. The other day
AM> he downloaded it, but his modem is not working yet.

I would like to add about unpacking the pktshek, i.e. when unpacking it, the beginning of the internal
file of at least the first 3 characters was renamed to digital ones, otherwise you have to
rename it every time so that LARA fails during tossing.

With best wishes, Sergey Kalinin.
YES NO GET AWAY...

Mon 18 Dec 2000, at 13:17:28 Yuri Potapov told Tigrr about PkUnzip.

YP> This is what I want to say about the subject 1.30f
YP> There are a couple of drawbacks in it now

YP> 1. If you enlarge the window with the drives a little, you can stick it there
YP> the inscription
YP> "SAME" or "DIFF" and then you can switch the modes "Same Disk"
YP> "Different
YP> Disks" it will be more convenient to unpack files on the same disk.

YP> Now: - A >> B -
YP> It is necessary - A diff B -
There is a button ss+5, as a result of pressing which the inscription appears type:
A >> *, which means unpacking to the same disk. RTFM, however.

YP> 2. The Free window hangs like a dead weight... If you unpack to another disk
YP> then
YP> absolutely unnecessary information
YP> about the free space on the source disk is shown.
But we’ll fix this.

In fact, Tigrr's computer was inoperative for about a month. The other day
he pumped it out, but his modem is not working yet.

Bye, Yuri! Vivid^Brainwave of X-Project.
Mail me: vivi...@e-mail.ru

▒▒▓▓▓ ▄▀█▀▀▀ ▓▓▓▒▒░░ Sincerely yours, Yuri /I \
▒▓▓▀▀ ▓▓▓▓▓▓▒▒░░░░ Jerri / Alien Factory \ZX/

Now he is already fussing - bourgeois technology is also subject to the Soviet soldering iron
:)

SK> I would like to add about unpacking pktshek, i.e. during
SK> unpacking, the beginning of the internal
SK> file was renamed, at least the first 3 characters were digital, otherwise you have to rename
SK> every time so that LARA would fail during tossing.
If necessary, you can do it, it’s not difficult, it’s just that no one asked...

The first thing I’ll add is unpacking from a text file and descl... But it will not be soon and this is a very big grief (c)accident :)

p.s. Maybe someone can tell me why I have AG3 in the controller in the
self-oscillating (like a one-shot...) mode when the magician is pressed, it goes away?
And she can’t get out of it herself - only on/off the computer a few times...

Well, bye! Tigrr from -■Brainwave^X-Project■- tigr...@mail.ru

YP> ok, ok :))))
Well, otherwise it’s always the authors’ fault... :) I hope they’ve made a new RTFM?
About the disk full window, I mean.

How is the new version working for everyone? Bug reports to the studio! :) I know that in our city it doesn’t work on one computer, the reason is not known at all :(

YP> if you had this kind of garbage...
YP> otherwise it won’t hurt in HAM 0.2...
Well, it’s necessary, it’s necessary, just how do I read it, if it’s diff then what, the first
thing should be to ask me to insert that disk, or what? I’ll do it on two different ones, on the same one,
even more so :)

p.s. someone was going to help me with disscl - I couldn’t answer, there were glitches on the node, now everything seems to be OK.

Tuesday 19 December 2000 at 16:51:09 Sergey Kalinin told Aleksey Malov about
PkUnzip
And then I burst in

SK> I would like to add about unpacking pktshek, i.e. during
SK> unpacking, the beginning of the internal
SK> file was renamed at least the first 3 characters to digital ones, otherwise
SK> you have to rename
SK> every time so that LARA fails during
SK> tosing.
you tell your boss that he would form normal packages for you, and
unzipe If such garbage is needed, it can only be turned off

With best wishes, Max Shashkin aka Shaitan/Stars of Keladan.

Once Fri 22 Dec 2000 at 03:13:23 Igor and Yuri were arguing about the topic PkUnzip

IT> Well, it’s necessary, that’s how it should be, but how can I read it, if diff
IT> then what, should I not first
IT> ask to insert that disk, or what? On two different
IT> - I’ll do it, on the same,
IT> even more so :)
Nooo, as I wrote down the piece, so from there you need to output “Free:”[!]

IT> p.s. someone was going to help me with the answer - I couldn’t answer
IT>, there were glitches on the
IT> node, now everything seems to be OK.
uh, easily, I can throw in the source code of the overlay, or even
I’ll rewrite it just like a thread, just how to present it,
and the format itself is very simple...
identifier, directory, and data... :)

[Friday 22 December 2000] at [03:09:03] Igor Turashev wrote a letter to Sergey
Kalinin.
They discussed the topic "PkUnzip". Let's continue what we started...

[skip]

IT> p.s. Maybe someone can tell me why I have AG3 in the
IT> controller in a self-oscillating mode (like a
IT> monostable...) the mode goes away when the magician is pressed? And she can no longer get out of
IT> it - only on/off
IT> the computer several times...

Have you changed this AG3 and/or its piping (especially the electrolyte)? Replace. Also check its asynchronous reset pins so that they are connected where they need to be and are not dangling in the air.

I also once had a clever AG3 (also in TR-DOS) - in RND order
itself_ issued NMI on the Z80. It was cured only by replacement.

Sincerely, Felix.

[I ZX]