Pentagon
ZXNet echo conference «real.speccy»
I am looking for any programs for setting up the /INT signal under
the subject and various recommendations will also be useful. I want
to know where exactly it should occur and what duration
it should have. How many lines from the beginning of the frame and how many measures from
the beginning of the line?
W!7h Be$7 W!$he$, FK0.
KF> I am looking for any programs for setting up the /INT signal under the
KF> subject and various recommendations will also be useful. I want
KF> to know where exactly it should occur and what duration
KF> it should have. How many lines are from the beginning of the frame and how many ticks are from
KF> the beginning of the line?
If you have an oscilloscope, then my INT method will be easier to configure. :-)
The length of the int should be in the range of 9-11 microseconds depending on
the number of clock cycles in the interrupt of this version. For Leningrad and the Pentagon
optimally ~9.5 mks. The pulse should be formed at the beginning of the frame
sync pulse.
Regards, Alex from FFC COMPUTERS.
>E-MAIL: asde...@softhome.net ICQ: #13064553
AL> If you have an oscilloscope, then using my INT method will be easier to set up.
:-) The length
AL> of int should be in the range of 9-11 microseconds depending on the
quantity
I know this myself. I am none the better for it. In my satisfaction
instead of multicolors, I have colored squares :-( Maybe it was remade for scorp
? :-/
AL> clock cycles in the interruption of this version. For Leningrad and Pentagon
optimally ~9.5
AL> mks. The pulse should be formed at the beginning of the frame sync pulse.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is known to every 3-year-old child.
But the personnel impulse is not in place!!!
I don’t have a Pentagon, I have a Scorpio redesigned,
it has no whites and the frame is stretched to 320 lines. And the int
of course did the CI at first, so everything is wrong. At the beginning the CI
turns out a lot. I made a delay on the shift register
correctly, and in satisfiction
the colored squares are on multicolors :-/ In RAGE everything is shifted
by one familiar place. to the left.
Maybe All knows how many clock cycles there will be from the beginning of the CI to
the beginning of the paper? This is the most important information in this case.
W!7h Be$7 W!$he$, FK0.
One day on 25 Oct 98 exactly at 00:55:00 Kirill Frolov wrote to Alex
Letaev on the topic 'Pentagon':
KF> instead of multicolors there are colored squares :-( Maybe she
KF> was remade for scorpio? :-/
Somewhere I had satisfaction for scorpio, but not I remember with or without colored
squares ;-)
With best wishes, Dmitry.
KF> I know this myself. I am none the better for it. In my satisfaction
KF>, instead of multicolors, I have colored squares :-( Maybe it was remade for Scorp
KF>? :-/
By the way, it seems that the problem was that Scorp, unlike the Pentagon,
changes the border along the H2 cut (it seems you need to find out for sure from Dima Lomov), while
as pent - the problem was solved instantly by hanging KP13, maybe that’s the point?
Always yours, LEO/SG.
KF> was converted to scorpion? :-/
Somewhere I had satisfaction with Scorpio, but I don’t remember with or without colored
squares ;-)
With best wishes, Dmitry.
DS> Somewhere I had satisfaction with Scorpio, but I don’t remember
DS> with or without colored squares ;-)
Oooh! Maybe you can post it here or somewhere else? Otherwise I still don’t have sitisfaction
. (Or, as a last resort, tell me where to get it on the Internet).
DS> With best wishes, Dmitry.
Good bye ! ... Pintium - garniy pin ...
Here waz Dmitriy AKA Raven.
How many clock cycles are there in an interrupt on your machine?
KF> colored squares on multicolors :-/ In RAGE everything is shifted
KF> one space to the left.
I’m sorry, but I probably can’t help here.
├┤i Leonid & Kirill !
[...]
LM> By the way, it seems that the problem was that Scorp, unlike
Pentagon, border
LM> changes along the H2 cut (it seems we need to find out exactly from Dima Lomov), while
like pent
LM> - instantly. The problem was solved by hanging KP13. HZ, maybe that’s the issue?
IMHO here you need to turn the one-shot and variable resistor.
W!7h Be$7 W!$he$, FK0.
DS>> I don’t remember with or without colored squares ;-)
DT> Ooh! Maybe you can post it here or somewhere else? Otherwise I still don’t have
DT> sitisfaction
DT>. (Or, as a last resort, tell me where to get it on the Internet).
But it’s somehow not like that for me, it seems to be reset. And in general here
people would hang themselves to download so much ;-)))
And I don’t know where to get it on the Internet :-(
With best wishes, Dmitry.
├┤i Alex & Kirill !
[...]
AL> How many clock cycles are there in the interrupt on your machine?
71680 seems... EXACTLY AS SUPPOSED. 224 per line and 320 lines.
There are no whites. 3.5 MHz.
W!7h Be$7 W!$he$, FK0.
KF> 71680 like... EXACTLY AS SUPPOSED. 224 per line and 320 lines.
KF> There are no whites. 3.5 MHz.
There remains one last thing that is not so easy to overcome. :-( For example, in the timing belt of older versions
the paper is shifted to the top by several lines. Perhaps something similar here. Compare
with the Pentagon number of cycles from the beginning of the interruption to the first line of the paper.
If a discrepancy emerges, you will have to struggle with the circuit for a long time.
Hello, All!
29 Oct 98 Dmitriy Timokhin wrote hoping that Dmitry Sharikov would read:
DS>> Somewhere I had satisfaction with Scorpio, but I don’t
DS>> I remember with or without colored squares ;-)
DT> Ooh! Maybe you can post it here or somewhere else? Otherwise I have sitisfaction
No need to come here!
All the best.
Roman.