I'm changing
ZXNet echo conference «real.speccy»
From Dima Bystrov → To All 3 February 2006
Dear lovers of scrap metal!
I exchange the following scrap metal in Ryazan or Moscow:
1. broken Pentagon 128 + mouse (mouse taken from another Pentagon, I can
provide at the client’s request) in a “Corvette” type case (big and
square);
2. unidentified ZX Spectrum 48 without keyboard, Z80 and ROM, but in a case
with power supply;
3. board of the rare Moscow Spectrum "O.V.H. - 128_Disk" (judging by
stuffing, 1993) by ? Vladimir Nikolaevich 535-45-05, 534-76-40, 536-50-32,
possibly working (did not include). Made on PLM. DIAGRAM ATTACHED;
4. at the request of the client, another broken Pentagon 128 without memory;
5. broken 5.25" disk drive "CHINON";
6. Pentagon 48k without keyboard, Z80 and RAM, but in a case with a power supply.
on:
The only working ATM turbo2+ board with AY.
Who will agree?
- A.Coder [Wolf2004 HexFill Pang16C TimeGal InfoGuide8 ACEdit98 PT3696 Chip13]
[ANS4 ZXR27UnR59 Jpg42 8col12 DBS7 CacVox1 Gluk61 PC21 Alasm504 STS71i HDDoc10]
... ZX Spectrum today
From Maxim Timonin → To All 4 February 2006
DB> Hello All!
DB> Dear lovers of scrap metal!
...
DB> One and only working ATM turbo2+ board with AY.
Now, if Roman fixes (promised) me the ATM-turbo 2+ board, which is a year old ago
I burned Cr0acker to me, and replaced the microscrew controller on it with a 1531-series
(so that there was enough power for two IDE devices), then I will give you this board
on which you programmed Time Gal, I will give you just like that, but with the indispensable condition
to make a lot of good and different toys underneath. :)
Maksagor, NedoPC group. ATM-turbo 2+
From Dima Bystrov → To All 4 February 2006
04 Feb 06 05:08, Maxim Timonin wrote to Dima Bystrov:
MT> Now, if Roman fixes (promised) me the ATM-turbo 2+ board, which a year
MT> burned for me a year
MT> ago, what did he do with it?
MT>, and replace the microscrew controller on it
MT> with 1531-series (so that there is enough power for two IDE devices),
maybe it’s enough to tighten the IDE bus to +5V with shortcuts?
MT> then I
MT> I’ll give you this board on which you programmed Time Gal, just like that,
MT> but with the indispensable condition of making a lot of good and
MT> different toys underneath. :)
you write toys yourself :)
when I read the following phrase from you:
/=== Begin Windows Clipboard ===/
for ATM-turbo 2+ and its graphics mode 320x200 (EGA) FOR THE FIRST TIME after more than a TEN YEAR break, a NEW toy PANG 16 colors has been released.
/=== End Windows Clipboard ===/
then he began to slide off the chair! I thought that my game would join the well-ordered ranks of
ATM games of 2004-2005, but it turned out that there were no orderly ranks...
by the way, convert those videos that you showed me - I released all the software for this.
and your “Capital” is incomplete! from the 1st volume - about 30%, from the 2nd - only the second
half, from the 3rd - only the beginning, and from the 4th there is no !!!
From Maxim Timonin → To All 8 February 2006
DB> you write toys yourself :)
DB> when I read the following phrase from you:
DB> /=== Begin Windows Clipboard ===/
DB> for ATM-turbo 2+ and its graphics mode 320x200 (EGA) FOR THE FIRST TIME after
DB> more than TEN YEARS break, a NEW toy PANG 16 colors came out.
DB> /=== End Windows Clipboard ===/
DB> then he began to slide out of his chair! I thought that my game would be included in the orderly ranks of ATM games of 2004-2005, but it turned out that there were no orderly ranks of
DB>...
Each code to the best of his strength and abilities. I was currently working on the OS and
developing the potential of the ROM, and promoting the computer to the masses. Without what
has been done in this area of programming, games for ATM, like the clone itself, few people would need. But with a new ROM and operating system, or rather based on them, you can develop confidently. I think then I’ll get around to games.
You yourself would think about programming for the OS, and not for Dyr-Dos...
DB> by the way, convert those videos that you showed me - I released all the software for
DB> for this.
Wait - from the software I saw only a converter of static images, and from
an AVI converter I saw only the source codes. There is still nothing to compile them on my PC. So there will be a complete version of the converter, maybe I’ll mess it up.
DB> and your “Capital” is incomplete! from 1stvolumes - about 30%, from the 2nd - only
Sorry, I didn’t check the contents - I gave what I found. I can look again, since
it happened like this.
DB> the second half, from the 3rd - only the beginning, and the 4th is not there at all!!!
Actually, the fourth volume does not exist in nature. The third volume ends with the phrase “here the manuscript breaks off.” The 4th volume is sometimes meant as a collection of various articles and notes by Marx, apparently intended for the future 4th volume, which was never published due to the death of the philosopher. All these materials were collected and edited in 1905-1910 by Kautsky, who published them under the general title "The Theory of Surplus Value". If you need exactly this
"Fourth volume", then I can look for it...
But let's not develop this deep off-topic in this echo...
From Maxim Timonin → To All 8 February 2006
DB> when I read the following phrase from you:
DB> /=== Begin Windows Clipboard ===/
DB> for ATM-turbo 2+ and its graphics mode 320x200 (EGA) FOR THE FIRST TIME after
DB> more than a TEN YEAR break, a NEW toy PANG was released 16 colors.
DB> /=== End Windows Clipboard ===/
DB> then he began to slide out of his chair! I thought that my game would be included in the orderly ranks of ATM games of 2004-2005, but it turned out that there were no orderly ranks of
DB>...
Each code to the best of his strength and abilities. I was currently working on the OS and
developing the potential of the ROM, and promoting the computer to the masses. Without what
has been done in this area of programming, games for ATM, like the clone itself, few people would need. But with a new ROM and operating system, or rather based on them, you can develop confidently. I think then I’ll get around to games.
You yourself would think about programming for the OS, and not for Dyr-Dos...
DB> by the way, convert those videos that you showed me - I released all the software for
DB> for this.
Wait - from the software I saw only a converter of static images, and from
an AVI converter I saw only the source codes. There is still nothing to compile them on my PC. So there will be a complete version of the converter, maybe I’ll mess it up.
DB> and your “Capital” is incomplete! from the 1st volume - about 30%, from the 2nd -just
Sorry, I didn’t check the contents - I gave what I found. I can look again, since
it happened like this.
DB> the second half, from the 3rd - only the beginning, and the 4th is not there at all!!!
Actually, the fourth volume does not exist in nature. The third volume ends with the phrase “here the manuscript breaks off.” The 4th volume is sometimes meant as a collection of various articles and notes by Marx, apparently intended for the future 4th volume, which was never published due to the death of the philosopher. All these materials were collected and edited in 1905-1910 by Kautsky, who published them under the general title "The Theory of Surplus Value". If you need exactly this
"Volume Four", then I can look for it...
But let's not develop this deep off-topic in this echo...
Maksagor, NedoPC group. ATM-turbo 2+
From Konstantin Denisov → To All 10 February 2006
MT> Now, if Roman fixes (promised) me the ATM-turbo 2+ board that Cr0acker burned for me a year
MT> ago, and replaces the microscrew controller on it
And under what conditions did this happen? For the final
decision I need to make on the issue of the possibility of allocating it a DVK-3M.
MT> for the 1531 series (so that there is enough power for two IDE devices), then I
What do you mean, the current carrying capacity? Immediately install something
like from class 531AP2...
... GLORY TO THE SOVIET ELECTRONIC INDUSTRY! GOST 4eVE-R!!!
From Konstantin Denisov → To All 10 February 2006
February, 03, 2006 21:15 Dima Bystrov Wrote to All :
DB> 1. broken Pentagon 128 + mouse (mouse taken from another Pentagon,
DB> can be provided at the client’s request) in a “Corvette” type case (large
DB> like this and square);
Native Corvette more interesting
DB> 2. unidentified ZX Spectrum 48 without
DB> keyboard, Z80 and ROM, but in a case with a power supply;
Oh, Yes!!!
DB> 3. board of the rare
DB> Moscow Spectrum "O.V.H. - 128_Disk" (judging by the padding, 1993
DB> year)
DB> by ? Vladimir Nikolaevich 535-45-05, 534-76-40, 536-50-32, perhaps
DB> working (did not include). Made on PLM. DIAGRAM ATTACHED;
Wladimir Nikolaevich with the surname O. from Zelenograd! We remember you,
you are alive, you are with us!
DB> 4. at the request of
DB> the client, another broken Pentagon 128 without memory; 5. broken
DB> 5.25" disk drive "CHINON";
I can offer an EU-style one with 360 kilo-eight-bit words... Thick 5"
DB> 6. Pentagon 48k without keyboard, Z80 and RAM, but
DB> in a case with a power supply.
Isn’t this position #2, at the close under consideration? ;-)))
DB> to:
DB> One and only serviceable ATM turbo2+ board with AY.
DB> Who would agree?
If it were... if I come across some AtmTurbo
made by Microart, then I’ll give it away with pleasure. Here
to buy for almost 3000p from NEDOPC a thing (for me personally) of little interest, while there is not enough enthusiasm... Now, if only I could “dig up”
somewhere a multi-payment zx-next...
From Valerij Kozhevnikoff → To All 27 February 2006
Fri, 10 Feb 06 at 03:26, Konstantin Denisov -> Dima Bystrov:
KD> Now, if only I could “dig up” a multi-pay zx-next somewhere...
I have it. One crooked friend tried to change the processor there (Z80H
wanted to be soldered in for coolness), as a result, he tore off several tracks. Then the computer came to me, I hastily restored the tracks, but the computer never started working, after which I lost interest and I abandoned it. If you delve a little more carefully
you can fix it, but there is no oscillator, it’s lazy, and I don’t have a suitable monitor
.
The kit includes 4 peripheral boards, all the circuits are there. The XT keyboard controller is soldered onto a breadboard. But there is a clean board for this controller (it is combined with the IDE controller).
It’s a shame to waste it, I’ll give it for some small change so that I won’t be too lazy
to drag it somewhere.
WBR, Jason.
_/(ZX)/_ /*e-mail: jason2000 (not a cat)yandex.ru ICQ: 62235830*/
/np:/ *silence*