Correct operation of screens 1 and 2 on Scorpio

Here is my question.
Scorpio users on yellow boards have probably encountered this
problem.
The fact is that on some programs, when entering the shadow box, a different
screen is installed, that is, not the one in which the shadow box was entered.:( And when exiting the shadow box, the previous screen is not installed and has to be in the monitor manually
set the desired screen, and then return to the program:(
This, for example, happens with the RDS 3.1 program. We go into the shadow box with
the 5th jar installed, and exit with the seventh one.
Also, when loading some programs from the broom, the screens switch alternately (we see this on the monitor screen) and it happens that when the program
loads, the second one is installed screen:(
Very unpleasant.
I read that on the Scorpio Turbo+ (green board), the manufacturers have
eliminated this problem.

So, can anyone tell me how to overcome this
trouble on the yellow board?

WBR, Andrey [ZX] Always with you -=SMONT/AIS=- [SCORPION ZS-256 Turbo]
[FIDO: 2:451/19.5] [ZXNet: 500:152/5]

... Home BBS (ZX-Station 500:152/5)

24 Aug 00 14:33, Andrey Eismont wrote to All:

AE> using the RDS 3.1 program. We go into the shadow with the 5th can installed, and
AE> we leave with the seventh one. Also, when loading some programs from
AE> broom, the screens switch alternately (we see this on the
AE> monitor screen) and it happens that when the program loads, the
AE> second screen is installed:( Very unpleasant. I read that on the Scorpa Turbo+
AE> (green board), the manufacturers have eliminated this problem.

Nothing has been eliminated there. Port condition It seems like they installed it on AY, but
the shadow service doesn’t use it.

AE> So, can anyone tell me how to overcome this
AE> trouble on the yellow board?

Change the ROM to one that doesn’t have shadow service.

24 Aug 2000 at 14:33, Andrey Eismont ═> All:

AE> The fact is that on some programs, when entering the shadow box,
AE> is set to a different screen, that is, not the one in which the shadow box was entered.:( And when

the larchenka sets it according to the value of the 3rd bit in 0x5b5c aka 23388.

AE> Also, when loading some programs from a broom, the
AE> screens switch one by one (we see this on the monitor screen) and it happens that when the program
AE> loads, a second screen is installed:(

during the loading time the little chest manages to click its beak half a hundred times...

AE> I read, that on Scorpa Turbo+ (green board), the manufacturers
AE> have eliminated this problem.

no.

AE>> RDS 3.1 program. We go into the shadow with the 5th can installed, and
AE>> we leave with the seventh one. Also, when loading some programs from
AE>> broom, the screens switch alternately (we see this on the
AE>> monitor screen) and it happens that when the program loads, the
AE>> second screen is installed:( Very unpleasant. I read that on Scorpa Turbo+
AE>> (green board), the manufacturers have eliminated this problem.

And the reason for this was Saturday August 26, 2000, 13:17,
appeal from Oleg Grigoriev (2:5030/675.11) to Andrey Eismont
[...]

AE>> screens switch (we see this on the monitor screen) and it happens that
AE>> when the program is loaded, the second one is installed screen:(

OG> during the loading time the little chest manages to click its beak half a hundred times...

:(

AE>> I read that on Scorpa Turbo+ (green board), the manufacturers have eliminated this problem
AE>>.

OG> no.

So they lied:(

KF>> but the shadow service does not use this.
AE> Why then did they write that they had eliminated it?

They eliminated it in hardware, but did not support it with software.