Klava.
ZXNet echo conference «real.speccy»
A fellow student here brought me a keyboard to connect. Connected. But he messed up something with the line.
Now his computer (he has Pro 4.2) pops up in the menu with the inscription: “Exit, only
via “Reset” !!!”). And the following table appears:
00000 00000
00000 00100
00000 00000
00000 00000
Like the "E" key is pressed.
There is also another strange thing when you press "B", the table looks like
00001 00000
00000 00100
00000 00000
00001 00000
At "N"
00010 00000
00000 00100
00000 00000
00010 00000
At "M"
00100 00000
00000 00100
00000 00000
00100 00000
With "SS"
01000 00000
00000 00100
00000 00000
01000 00000
When Space
10000 00000
00000 00100
00000 00000
10000 00000
Also, “4” does not work
And if you press “5” - “Delete”
Then the situation is similar to pressing "B"-"Space"
Vladimir
[I ZX] [Sprinter Developer] [MGAPI-UP-1:2003]
[Sprinter UNofficial site: cr0acker.narod.ru]
[Liberation of Liberia]
11 Feb 04 18:27, I wrote to All:
VK> Hello All.
VK> A fellow student here brought me a keyboard to connect. Connected. But VK got something wrong with the line. Now his computer (he has Pro 4.2) falls into the
VK> menu with the inscription: “Exit, only through “Reset” !!!”). And this appears
So I found why the keyboard doesn’t plow :) There was a short circuit :) But I still got the address lines mixed up :) Moreover, on a large scale
I.e.
0 became 1, 9=2, etc. up to 1 which became 0, swapping D6 and D7
didn’t give anything:( What to do?
VK> I still got it wrong :) And on a large scale I.e. 0 became 1, 9=2, etc.
VK> up to 1 which became 0, swapping D6 and D7, gave nothing
VK> :( What to do? Vladimir
VK> [I ZX] [Sprinter Developer] [MGAPI-UP-1:2003]
VK> [Sprinter UNofficial site: cr0acker.narod.ru]
VK> [Liberation of Liberia]
VK> --- GoldED/W32 3.0.1
VK> * Origin: (2:5020/12000.48)
[Sprinter UNofficial site: cr0acker.narod.ru]
[Liberation of Liberia]