GLUK RESET SERVICE v5.4R

To those for whom the subzh partially refused to work!

It turns out that Gluk detects the mouse well, but disables it poorly...
Or rather, it doesn’t disable it at all! Even if you press “1”!

It turns out that if the computer, for some unknown reason, has a Kempston stick on the #DF port,
then the mouse will supposedly press fire, and Gluk will think that you are dreaming of interrupting reading from the disk in this way! :(

Connect all the contacts of the Kempston connector with the “common” of this connector!
By the way, many other programs also help :)))
Well, or you want, do a complete decryption ;)

The bug, so to speak, has been left as a legacy...

- Alone Coder

Dima Bystrov ==========> All:

DB> It turns out that if the computer, for some unknown reason, has a Kempston stick on the
DB> port #DF, then the mouse will supposedly press fire, and Gluk will think that you
DB> are dreaming of interrupting reading from the disk in this way! :(
DB> Connect all the contacts of the Kempston connector with the “common” of this connector!
DB> By the way, many other programs also help :)))
DB> Well, or you want - do a complete decryption ;)

Byte 01 also has incomplete decryption of Kempston, of all the mouse
ports it is readable by Kempston and some buggy ones Autodetection
is defined as the presence of a mouse. Here is the correct detective code:

=== Cut ===
TSTM HALT
LD A,201
LD (MDRV),A
LD A,90
OUT (#7F),A
OUT (#5F),A
LD BC,#FFDF
IN H,(C)
LD B,#FB
IN L,(C)
DEC B
IN A,(C)
CP L
RET Z
CP H
RET Z
XOR A
LD (MDRV),A
INC B
IN L,(BC)
LD B,#FF
IN H,(BC)
LD (MPO),HL
RET
=== Cut ===

Bye!
Pa...@nm.ru rscg.boom.ru [RC 2.0 70%] [ZX] [Real Software]