ISDOS disk format

ZXNet echo conference «real.speccy»

From Eugene Palenock To All 7 March 2002


Hello, All!

Give me some information about the physical format of ISDOS floppy disks.

I remember that the last sector there was numbered 9 (or 8?).
But the first 4 were 0123 or 1234?

And it seems that the last sector was named 9 on all tracks, and not just on 0?

The physical format of a bootable floppy disk is no different from a non-bootable one 800k ?

zy. check in Conver Commander 4.61 - it showed the format in the doctor. But I
have nowhere to run it.

* Original written in ZX.SPECTRUM
* Copied in REAL.SPECCY

Regards, Evgeniy.

... http://2065.da.ru

From Kirill Frolov To All 7 March 2002

Press RESET immediately, Eugene!

07 Mar 02 10:44, Eugene Palenock wrote to All:

EP> Give information about the physical format of ISDOS floppy disks.

5 sectors of 1 kb. Numbers 1,2,3,4,9. The side number seems to be set
correctly.

EP> I remember that the last sector there was numbered 9 (or 8?).
EP> But the first 4 are 0123 or 1234?

The sector with number 0 is not used practically anywhere on Spectrum and PC.

EP> And it seems that the last sector was named 9 on all tracks, not just
EP> to 0 ?

For everyone. And in Profi CP/M only on track 0.

EP> The physical format of the boot floppy disk is no different from the non-bootable one
EP> 800k ?

Of course not. There is a problem when transferring zx<->pc - either sector 1 starts
too
early and is not readable on PC, or sector 9 ends too late and if
recorded on PC
it is not readable on Spectrum.

EP> pm. check in Conver Commander 4.61 - it showed the format in the doctor.
EP> But I have nowhere to run it.

There are programs on the PC...