ÅÝÅ ÂÏÌÅÅ ÂÅcÐÏÌÅÚÎÁÑ ÉÎÆÏpÍÁÃÉÑ ( ;))))))))
ZXNet echo conference «real.speccy»
Hello, dear friends, comrades, spectrists in the end!
We offer you free CDs with programs for REAL
ZX-SPECTRUM.
To begin with, how to use our CDs. The CD is installed into a CD player, a stationary player, or a CD-ROM drive of another computer that has an audio output. The tape input of your SPECTRUM or compatible computer is connected to one (left
or right) channel of the linear output of the player, after what is done
loading as from a magnetic tape.
The first batch of discs will consist of 8 copies, if there is not enough for everyone
we will make some more CDs. It is possible to send limited edition CDs by mail beyond 5020.
All programs on the CD will be intended for computers with 48 kB RAM,
if the program runs on other memory configurations or requires peripheral equipment, this will be indicated in the accompanying documentation.
... np: AEROSMITH: (I don’t know what it’s called)
And how can we GET this miracle???????
Well, I think I said everything... Bye _*Konstanteen*_ !
... ...and our names will be written on the wreckage of Microsoft.
KD> one (left or right) channel of the linear output of the player, after
KD> which is loaded as from a magnetic tape.
but what about loading from Elite? - Should I connect CD-RW? ;)
KD> The first batch of discs will consist of 8 copies, if there are not enough people for all
KD>, we will make some more CDs. It is possible
KD> to send limited edition CDs by mail beyond 5020.
let me test the boom ;)
Sincerely, Evgeny Belov.
And it was morning, and there was a day on May 17, 04, and once upon a time Konstanteen Denisov wrote All
about _RE: even more useless information ( ;)))))))_.
KD> Free CDs with programs are offered to your attention for REAL
KD> ZX-SPECTRUM.
Finally, we thought about tape only users!!!!!
KD> The first batch of discs will consist of 8 copies, if there aren’t enough people willing for all
KD>, we’ll make some more CDs. It is possible
KD> to send limited edition CDs by mail beyond 5020.
How is that? (After all, “there is no such thing as a freebie” (c) KF0)
But if something happens, then my snail mail:
Last name - Sharikhin
First name - Alexander
Patronymic - Sergeevich
Index - 357100
Address - Stavropol region, Nevinnomyssk, st. Mendeleev house 8
apt. 41
KD> All programs on the CD will be intended for computers with 48 kB RAM,
KD> if the program runs on other memory configurations or requires peripheral equipment, this will be indicated in the accompanying package. documentation.
If my pro is not dead (which is very possible;<), then that’s good!
Bye!
KD>> there won’t be enough for everyone, we’ll make some more CDs.
KD>> It is possible to send a limited edition of CDs by mail outside
KD>> 5020.
EB> let me test the boom ;)
Write the mail index (not electronic, but regular ;-))) preferably in netmail.
May, 19, 2032 01:45 John Zaicev Wrote to Konstanteen Denisov :
JZ> And how to GET this miracle???????
write the address of regular (paper) mail. To netmail.
And it was morning, and it was the day of May 19, 04, and once upon a time Evgeny Belov wrote to Konstanteen
Denisov about _RE: even more useless information ( ;)))))))_.
EB> but how to ship from Elite? - Should I connect CD-RW? ;)
I only found out this year what elite is, but don’t even think about shipping, I would have at least been offered a year ago... :>>>>
And if you need shipping, make a “shipping” tape (I’ve done this) and there
“ship” as much as you like :>
PS: I don’t know, I left Whether my snail mail was in the echo (or it went where I was going to send it), but you can send floppy disks (5.25 and 3.5 with a sealed window), cassettes and boards to this snail. :>(for example, a com port for the pros, an IDE interface and a
modem [xtr or cdos]... I’m currently assembling covox myself...) :>
ZYY You can treat what was said in “PS” with humor, but if someone sends me something,
then I’m all for it! (I’m the only one left in my city spekptumistom)
Bye!
EB>> but what about shipping from Elite? - Should I connect CD-RW? ;)
AS> I only found out this year what elite is, but I don’t even think about shipping anymore
AS> think, they would have at least offered me a year ago... :>>>>
AS> And if you need shipping, make a “shipping” tape (I’ve practiced this) and there
AS> “ship” as much as you like :>
AS> PS: I don’t know if my snail mail went into the echo (or it went to where I
AS> was going to send it), but you can send floppy disks (5.25 and 3.5
AS> with a closed window), cassettes and boards to this snail. :>(for example, a com port for a pro, IDE
Do you happen to have Profi? Maybe there are programs for it?
AS> interface and modem [xtr or cdos]...covox I’m currently assembling myself...) :>
AS> ZYY You can treat what was said in “ZY” with humor, but if anyone tells me
AS> will send it, then I’m all for it! (in my city I’m the only one left as a specpotumist)
Congratulations on that! But not alone in Russia! :-)))
With best wishes, Vladimir Panteleevich.
And it was morning, and there was the day of May 24, 04, and once Vladimir Chernikov wrote
Alexander Sharihin about _Re: even more useless information ( ;)))))))_.
VC> Do you happen to have Profi? Maybe there are programs for it?
Of course, a pro! I was still (for some reason) looking for Scorpion, my ears were “fooled” (c) by the interrogator of the Nevinnomyssk Internal Affairs Directorate Amelchenko
that he was, like, the coolest of all, but then I decided to look for everything and they offered me
Profi (as it turned out that only Profi and Pentagons were in our city and
48s)
By the way, my question is this...
The bottom board is labeled 4.01, and the top one is incomprehensible, but obviously not 4.01, in fact
there you can solder 2 55s and 51s, but when you try to find the place where it
is soldered...
I was almost left without pro. (he's not dead, hurray comrades!!! but sometimes now
green gets confused with black :>) I'm looking for diagrams and wiring and other documents for pro,
somewhere in these versions (x.x-4.02) :> (and also looking for a diagram of a "remote" com port)
I have almost all the software no (precisely professional oriented, there is a CPU/em boot
and a copier), but this will do (the disks are all 7th disk, XAS, PINIX [my
TV] tracker, chip tracker and other nonsense megabytes for 60 :> )
VC> With what and Congratulations! But not alone in Russia! :-)))
I'm not sure, but if someone sends me a kemston mouse, I'll believe it:>
Bye!
VC>> Do you happen to have Profi? Maybe there are programs for it?
AS> Of course, a pro! I was still (for some reason) looking for Scorpion, I was looking for
AS> Pentagons and 48s) By the way, my question is this...
AS> The bottom board is signed 4.01, and the top one you can’t understand, but obviously not 4.01,
AS> in fact there you can solder 2 55s and a 51st, but if you try find the
AS> place where it is soldered...
AS> I was almost left without a pro. (He’s not dead, hurray comrades!!! but sometimes now
AS> green and black are confused :>) I’m looking for diagrams and wiring and other documents on
AS> pros, somewhere like that versions (x.x-4.02) :>(and also looking for a “remote” circuit
Don’t you have an album of basic circuit diagrams for Profi?
Schemes can be downloaded from the site: http://atmturbo.narod.ru/others/profi/pr_scm.htm.
They in an alternative encoding in pseudographics, so immediately convert them to
Profik and look in the Write System (SR/M) editor, from there you can print them on a printer on A4 sheets. I recently downloaded them myself, but haven’t checked them with the album yet.
It seems there are slight differences. Of course you can look. them andon the computer in the "Lexicon 1.4" editor, or in the "Word and Deed" editor.
AS> com port) I have almost no software (precisely professional oriented, there
I am only interested in the software of the CP/M OS, and not TR-DOS.
AS> echo (or it went where I was going to send it), but to this snail
AS> you can send floppy disks (5.25 and 3.5 with a closed window), cassettes and boards.
AS> :> (for example, a com port for pros, an IDE interface and a modem [xtr or
AS> cdos]...covox I'm currently assembling it myself...) :>
AS> ZYY You can treat what was said in “ZY” with humor, but if someone sends me something
AS>, then I’m all for it! (in my city I’m the only one left as a spectumist)
I don’t quite understand what you need. I can’t help with the hardware, I can share
information (diagrams, descriptions, etc. are on the fax server - there are ~6 MB of SPM,
not posted yet); programs, including those under SPM.
With respect, Alexey!
Replying to a message of Vladimir Chernikov to Alexander Sharihin:
AS>> “ship out” as much as you like :> PS: I don’t know if my snail mail
AS>> went into the echo (or it went to where I was going to send it), but you can send a snail to this
AS>>, floppy disks (5.25 and 3.5 with a sealed window), cassettes and
AS>> boards. :>(for example, a com port for a pro, IDE
VC> Do you happen to have Profi? Maybe there are programs for it?
I have 80-90% of everything that was written for Pro.
Which version of Profi do you have?
With respect, Alexey!
AS> Of course, a pro! I was still (for some reason) looking for Scorpion, they
AS> “fooled my ears” (c) interrogator of the Nevinnomyssk Internal Affairs Directorate Amelchenko
AS> that he was, like, the coolest of all, but then I decided to look for everything and they offered me
AS> Profi (as it turned out that in our city they only went to
AS> Profi, Pentagons and 48ths) By the way, my question is this... The bottom board
AS> is signed 4.01, and the upper one you can’t understand, but obviously not 4.01, in fact there
AS> you can solder 2 55ths and 51st, but when you try to find the place where
AS> it is soldered... I was almost left without pro. (he's not dead, hurray
AS> comrades!!! but sometimes now green is confused with black :>) I'm looking for circuit diagrams and
AS> mounting and other documentation for pros, somewhere like these versions (x.x-4.02) :
AS> (and also looking for a diagram of the "remote" com port)
This is what is on my fax server. There is somewhere a diagram from Profi 5.0 + all
modifications up to 5.3
COM-PORT.RAR [000] /Help/Hard/Computer/Profi Album of communication port diagrams for "Profi" v. 2-13 (DjVu Solo 3.0 format)
PROFIPL4.RAR [000] /Help/Hard/Computer/Profi Set of computer circuits "Pro Plus"
v. 4.1 (DjVu format)
AS> I have almost no software (precisely
AS> is professionally oriented, there is a CPU/EM boot and a copy), but
AS> this will do (the disks are all 7th disk, XAS, PINIX [my creation]
Bythe latter in more detail.
The software is under SPM on a screw of more than 16 MB in LZH.
AS> tracker, chip tracker and other nonsense 60 megabytes :> )
AT> I have 80-90% of everything that was written under Profi.
AT> What version of Profi do you have?
I have the latest Profi version 5.0, i.e. with a megabyte of memory.
I am interested in programs that I don’t have for a Pro in SR/M OS. Well, for example, the music editor "Synth Master" is of interest. Actually, I have it, but
for some reason it doesn’t start working. Also of interest are floppy disks with music
.ADJ files; 23 of them were produced (I have 2 floppy disks). If you can
give me a list of what you have, as well as what questions interest you about
Profi in OS SR/M?
And also, you wrote that your software is posted on a fax server, please explain
what kind of server is it and how can I view your software on it? And also, what is the DjVu Solo 3.0 format? I haven’t encountered this yet, so I don’t know what’s going on.
VC> My Pro version is the latest 5.0, i.e. with a megabyte of memory.
well, that’s not a fact. The memory meter can be installed on any Profic. Version 5.0
(possibly version 4.0) has 512Kb already on the board, also on the board already
installed (but may not be installed): com port for 9600, expanded
color palette of 256 pcs, digital output to the monitor, IDE controller for 2 devices,
real-time chip, you can install a new crystal and overclock the profi
to 21 mg inclusive. You will have version CP/M 5.0
VC> I am interested in programs that I don’t have for the pros in CP/M OS. Well
VC>, for example, is interested in the music editor "Synth Master". Actually
VC> I have it, but for some reason it doesn’t start working.
Yes, it works, but I can’t copy it - protection. And you most likely haven't configured
the parameters. :) I struggled with it for a long time too. In his work he uses the library of the windowed Internet interface windows. It needs to explicitly register
several pages of memory (they must be excluded from the disk frames). Moreover
in version 5 of CP/M you cannot specify some pages. All this is learned experimentally. My memory layout is as follows: up to 256 system memory (there is a lot of free space there - this is a reserve for the future), up to 512 memory for programs (including for Windows), above 512 RAM disk (you can reduce it).
Yesterdaytook my Profik (HURRAY!!! What the party had been warning about for so long has happened!! :)) something needs to be put in place and running. If everything goes
ok, I can send you my configs.
VC>
VC> are also interested in floppy disks with .ADJ music files, 23 of them were released
VC> (I have 2 floppy disks).
There are only a few melodies. IMHO this is no longer necessary:
1. There is GS, it works great in CP/M. You load music into it from the screw and work
further. Tired of loading another one. Fortunately, I have 32MB of mod files on my hard drive. :)
2. you can make them yourself. There is a convector from some format on a computer,
I'm afraid to lie in the name.
VC> If you can send me a list of what you have,
The list is not complete, you need to describe everything again. Flew to your netmail.
VC> and also what questions interest you about Profi in OS SR/M?
Everything interests me. In particular: how to work with the screw (switch partitions, etc.), how to work with the expanded palette, how to work with the library of the windows window interface (I didn’t succeed), I’m looking for a strategy game on the entire disk (I don’t know the name), I’m looking for the Profi Vision interface.
VC> And also, you wrote that your software is posted on a fax server, explain,
VC> please, what kind of server is this and how can I view your software on it?
The other day the list went into the echo topic, and the ad - everything is written there.There's not much software there
(there's no software at all for CP/M - I haven't had time to post it yet), mostly text files on different topics (in fact, that's what was originally planned).
VC> Also, what kind of format is DjVu Solo 3.0? I haven’t encountered this yet,
VC> that’s why I don’t know the matter.
I haven’t encountered the same. :) This file flew through the echo. As far as I know, this
information compression format compresses circuits well. To view you need a special
program. There are many specialists here, they should answer better and in more detail.
With respect, Alexey!
On Wed, 26 May 04 22:35:28 +0400, Vladimir Chernikov wrote:
VC> And also, what kind of format is DjVu Solo 3.0?
VC> I haven’t encountered this yet, so I don’t know about it.
In short -- this is a file type (*.djvu) and a raster image compression technology. A djvu file is a
collection of compressed images and
information associated with them: recognized text on a scanned image,
hyperlinks between pages, etc. The compression method used by
djvu allows for a noticeable (several) superiority over other
technologies in terms of the degree of compression, both for bitonal (monochrome
scanned images) and for full-color images.
In the first case, methods similar to JBIG compression are used,
in the second, similar to JPEG2000. From the point of view of the end
user, djvu provides files of a smaller size, sometimes
significantly smaller (12 MB of djvu versus 200 MB of pdf),
and more or less convenient (compared to Acrobat Reader) and a fast
viewer that provides the proper quality on the screen -
the image is scaled without significant distortion, and
the ability to print the document. The main area of application of DjVu
is the storage of scanned images, for example
electronic versions of books, albums of electrical circuits,
drawings, etc.
As a viewer andprograms for creating DjVu files
for Windows, suitable DjVu Solo 3.0, distributed at one time for free, but now not available on the LizardTech website:
2228336 Dec 23 2002 DjVuSolo3.1-noncom.exe
The program can be found on the network, if desired. If you have difficulty finding
speak by e-mail - I will send it (size - 2.3 MB).
For unix-like systems, DjVulibre is available, which
includes a set of programs for manipulating
djvu-files, which allows, among other things, the creation of your own
djvu-files, as well as a viewer and plug-in for the Netscape
(Mozilla) browser. DjVulibre differs from djvu solo for the worse in a number of characteristics, in particular, compression
of bitonal images is up to 2 times worse in size (on the other
hand, there are fewer quality losses...) DjVulibre is freely
available at http://djvu.sourceforge.net. There are packages for Debian
...
For more information about DjVu and the available software
you can visit http://www.djvuzone.org и
http://www.lizardtech.com.
AT> you can install
AT> a new crystal and overclock the profik up to 21Mg inclusive. It will work for you
for us the maximum we managed was like 11 or 13, in the same place the frequency seems to be divided in half,
i.e. Do you need quartz for 42MHZ??
I just looked at the diagram, there you can set the maximum to 24MHZ, i.e. really
the frequency of the processor is no more than 12MHZ, I remember MODPLAYER by Cobra on SOUNDRIV showed
about 28khz
pokedova Aleksey
jtn\\4d
On Fri, 28 May 04 09:33:02 +0400, Aleksey Tarasow wrote:
AT> Yesterday I picked up my Profik (HURRAY!!! What the party warned about for so long
AT> has happened!! :)) I need to put something in place and start it.
The CD-ROM is connected, and at least a hard drive? I would like to make sure
that the driver is (not) working (included with cdhack, current
version 0.3 -- http://cdwalk.narod.ru/cdhack03.zip). I mean the
professional IDE controller.
VC>> Well, for example, the music editor "Synth Master" is of interest.
VC>> Actually, I have it, but for some reason it doesn’t start working.
AT> Yes, it works, but I can’t copy - protection. And you
Protection is not a hindrance. Distill the disk into a .td0 image file using the Teledisk program,
get it and send it to me via netmail.
most likely
AT> has not configured the parameters. :) I struggled with it for a long time too. In
AT> he uses the windows library of the windowed Internet interface in his work. It needs to explicitly
AT> register several pages of memory (they must be excluded
AT> from the disk frame). Moreover, in version 5 of CP/M you cannot specify some
AT> pages. All this is learned experimentally.
No matter what I did, I couldn’t launch Synth Master.
I was like
AT> Yesterday I took my Profik (HURRAY!!! What
AT> the party warned about for so long has happened!! :)) I need to put something in place and
AT> start. If everything goes well, I can send you my configs.
I'm waiting.
On Sat, 05 Jun 04 20:04:33 +0400, Vladimir Chernikov wrote:
VC> There is a distribution disk "CBIOS v 5.03 HDD" which contains a program
VC> for
VC> working with the screw.
What is its purpose? Can you get it out of the disk into a readable form (for example,
in an lzh archive)?