Author of Hardware Gigascreen.

Good afternoon, All!

It was a long time ago, I don’t even remember what year it was.
I developed a circuit so that two screens (7 and 5) would overlap each other without blinking and
int.
I hung #EFF7 on the port.
Well, I’m interested, now someone writes under this device with what? Coder, artist, hardware engineer. (SchemeMan) 2:5026/51.12 AKA 2:5026/63.3

Greetings, dear Dmitry!

Saturday January 12, 2002 12:26, Dmitry Pugachev for some reason wrote to All:

DP> Good afternoon, All !

DP> It was a long time ago, I don’t even remember what year it was.
DP> Developed by me a circuit so that two screens (7 and 5) without blinking and eating
DP> int would be superimposed on each other.
DP> I hung it on the #EFF7 port.
DP> Well, I’m interested, now who is writing to this device?

What the hell! Izhnews #0C & PoS-WT demo & Mad Mixels MegaDemo from ASCii
DemoParty hold this feature.

I am probably the only one and the very first to write support for this device.

DP> PS. If you need to explain anything about the device, write letters.
Looking at the diagrams of the Pentagon we see something like this.

an interruption came, draw one line of one screen, draw the next line of the second
screen.
the next interruption came, everything is the same, only the lines have changed, i.e. draw
lines of the second screen, then the first.

If I understand correctly, it would be cooler to mix completely, but for this you need
the circuits to be fixed.

With respect, HIMIK'S ZxZ/PoS-WT.

IK> Looking at the diagram of the Pentagon, we see something like this.

IK> an interruption has come, draw one line of one screen, draw the next
IK> of the second
IK> screen.
IK> the next interruption has come, everything is the same, only lines changed, i.e.
IK> we draw
IK> the line of the second screen, then the first.

IK> If I understand correctly, it would be cooler to mix it completely, but for this
IK> you need
IK> the circuit to be fixed.

you can simplify the circuit (at the same time you won’t need to write a manual detection in each
prog): throw out KP11 and the frame rate divider. Instead of the 25hz signal, apply
the SCR signal. Those. It will flicker only when switching screens programmatically.

JTN/4D

Good afternoon, Ilya!

My on-board systems detected that on Monday January 21, 2002 21:21,
Ilya Kudryavcev wrote to Dmitry Pugachev:

IK> If I understand correctly, it would be cooler to mix completely, but for
IK> this requires a diagram fix.
If you fix it, then there will be more cases and the complexity of assembly will increase.
And I first of all came up with a scheme so that it would be simpler and everyone or almost
everyone could assemble it. And where is complete mixing, because the flickering is already
not noticeable or almost not noticeable.