AOH do you understand?
ZXNet echo conference «real.speccy»
A new AOH for the spectrum has been released in St. Petersburg, and here you are connecting some kind of chaos
incomprehensible
. Throw away this crap! Vicomm (XTR) modem 4ever! ▒▒▒▒▒▒▒▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
This software product is
FREEWARE, i.e. is distributed to everyone under the condition that no changes will be made to the program. The author is not responsible for hacker versions. Commercial distribution is only
welcome! If you get this version, copy it to someone else! ;)))
▒▒▒▒▒▒▒▒▒▒▒ New in version 1.1 ▒▒▒▒▒▒▒▒▒▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
- When the handset is off-hook on a parallel
device, you can press the space bar and the program
will go into call waiting mode
- The time is not displayed continuously, but only
once per second. Previously there were brakes due to this
- You can change the color of the system, as well as
all menus
- Added trill test after loading
program, needed to control the volume of
amplifier
- Support for Kempston mause
has been implemented - Added “go to” item in the notebookto..."
- Added terminal mode
- Time is read not from a separate
overlay, but from the modem driver
- Fixed a glitch - sometimes when writing to an address book, the computer was reset
- In the main menu, added the item "restart AOH"
- When viewing outgoing and incoming
calls, you can call the current
number (key 'R')
- You can set the duration of the trill
- Added change in the number of polls
line for which the program detects short beeps
- Exiting the "call waiting" mode is now
not through a space, but through a fire
- When viewing incoming and outgoing
calls, you can use not only
arrows, but also control keys
- Changing the "Delay" parameters repeat" and "Key hold"
- No need to press any key after
loading all overlays
- Processes "*" characters when entering
search model and file name
▒▒▒▒▒▒▒▒▒▒▒▒ Kempston mause ▒▒▒▒▒▒▒▒▒▒▒▒▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
You can enable or disable the mouse through
MAIN MENU/SETTINGS/SYSTEM! There is no test for the mouse, so if you disconnected it
from the computer, you need to hold down the
K key when starting the program to turn it off. On the mouse, the left button is 'FIRE'.and
the right one is 'CANCEL'. This is how I will
denote them below in the description. With a mouse you
will get extra pleasure from
the program!
▒▒▒▒▒▒▒▒▒▒▒▒▒ Menu operation ▒▒▒▒▒▒▒▒▒▒▒▒▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Operation is carried out using a arrow
controlled by Q A O P SPACE, SINCLAIR I,
SINCLAIR II or Kempston mause. Entering
a menu item is done by pressing 'FIRE',
and if the arrow was outside the menu, then
you will exit it. You can also exit
with the 'CANCEL' button on the mouse.
▒▒▒▒▒▒▒▒▒▒▒▒ Notebook ▒▒▒▒▒▒▒▒▒▒▒▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
This notebook contains 111 numbers, each of them can be blacklisted or whitelisted. When editing
a phone number, all characters are available, but
after entering, characters other than
"0"..."9" will be replaced with "-". When editing information about a phone, all symbols are also available, but they will not be replaced by
anything. Moving through the notebook can be done through the items
"forward", "back" and "go to...", as well as
if the search is successful. When you enter
this menu item, you will be asked for a model to
search. It can represent both a telephone number and information. Instead of"*"
will search for any character. Before clearing your address book, you will be asked about this.
▒▒▒▒▒▒▒ Viewing outgoing calls ▒▒▒▒▒▒▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
When viewing outgoing calls, the following keys are in effect:
->, right or move the mouse to the right -
forward to the number
<-, left or move the mouse to the left - to-
back to the number
Enter, fire or 'CANCEL' on the mouse - exit
R or 'FIRE' on the mouse - call the
current number
If you have a watch, then
the time and date of the call will be shown.
▒▒▒▒▒▒ Viewing incoming calls ▒▒▒▒▒▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
When viewing incoming calls, the same keys operate as when viewing
outgoing calls. Also, if you have a
watch, the time and date
of the call will be shown. When the identified
number is found in the address book,
information about the owner of the number will be displayed, as well as
whether it is included in any list...
▒▒▒▒▒▒▒▒ Setting the system color ▒▒▒▒▒▒▒▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
The system color is set
via MAIN MENU/SETTINGS/SYSTEM. You
will be prompted to enter the color of paper, ink,
border, as well as brightness (1-is, 0-not).
▒▒▒▒▒▒▒▒ Setting menu colors▒▒▒▒▒▒▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
You can get here through the MAIN MENU/SETTINGS/SYSTEM. A menu will be displayed on the screen, as well as its current color.
The keys used here are:
->, right or move the mouse to the right -
go to the next menu
<-, left or move the mouse to the left - go to the previous menu
fire or 'CANCEL' on the mouse - exit
Enter or 'FIRE' on the mouse - editing menu color
▒▒▒▒▒▒▒▒▒▒ Terminal mode ▒▒▒▒▒▒▒▒▒▒▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Terminal mode is designed to
view and delete both incoming and
outgoing calls from another computer through a terminal program (MMD). Against unwanted penetrations into your computer, a ten-character password is provided. If in the terminal the computer asks you to enter something (for example, a password) of more than one character, then you should
enter it through a macro. When entering a password,
Enter is not placed at the end. If you want
to enter terminal mode, then issue some symbol in
the line before the beep.
Once upon a time Fri 8 Sep 2000, Kirill Frolov and All thought on the topic: AOH
understand
KF> Here in St. Petersburg a new AOH for the spectrum came out, and you are some kind of hays
hmm, interesting of course, but the practical value of this program is a big
question. No, well, think about it: you’re sitting on the spec / you, of course, aren’t sitting on it, but
it doesn’t matter / you’re reading the latest mail and then they call you, it turns out that you need to suddenly reset the computer, load this thing and see who’s calling? Naffik, perverted
IMHO, it’s better to put a normal AOH. btw, what about the quality of identification
numbers?
KF> you connect incomprehensible ones. Throw away this crap! Vicomm (XTR) modem rulez
KF> 4ever!
let go of this false patriotism...
[...]
For this Au Revoire, CompoWellcome. aka: 2:5085/1.149
2:5085/26.51
KF>> some kind of chaos
ND> hmm, interesting of course, but the practical value of this program is under
ND> a big question. no, well, think about it: you’re sitting on spec / you, of course, aren’t sitting on it, but it doesn’t matter / you’re reading the latest mail and then they call you,
ND> it turns out that you need to abruptly reset the computer, load this thing and
ND> see who’s calling? Naffik, perverted IMHO, it’s better to put a normal AOH
ND>.
Everything is fine! I read mail on the PC.
ND> btw, what about the quality of number identification?
Enough.
10 Sep 00 06:51, Nicolas Davidov -> Kirill Frolov:
[skipped]
KF>> A new AOH for the spectrum came out in St. Petersburg, and here you are
KF>> some kind of chaos
ND> hmm, interesting of course, only the practical value of this programs under
ND> a big question. no, well, think about it: you’re sitting on the spec / you’re, of course, on
[skipped]
ND> to see who’s calling? Naffik, perverted IMHO, it’s better to put a normal AOH
ND>.
Is it hard to come up with a more other option? :)
I turned on the computer and let it work.
You can go wherever you want...
Or you are busy with something else (not with the computer).
And this actually turns out to be a secretary phone
programmable :)
ND> btw, what about the quality of caller ID?
B in principle, like a regular AON.
At least for me, the OAN in the MMD driver and the regular AOH
are defined the same way.
Aleksandr
Message Return, CompoWellcome. at: 2:5085/1.149
2:5085/26.51
AM> Is it difficult to come up with another option? :)
not difficult, but I chose the most... well, the most! ;)
AM> Turned on the computer and let it work. You can go wherever you want... Or you are busy
AM> with something else (not with a computer).
oh well. Monique will also burn in vain if you hang out next to the computer, and don’t
go somewhere...
AM> And this actually turns out to be a programmable secretary phone :)
well, yes, all that remains is to implement an answering machine :))
ND> I'm aware. so you can honestly use the spec as an AOH :)
I can’t. Peterstar wants money for AOH, but I don’t want it...
AM>> Or busy with something else (not with the computer).
ND> oh well. Monique will also burn in vain if she hangs out next to the computer and
ND> doesn’t go somewhere...
Yes, we need to output the information through a link to the pussy...
Once upon a time Fri 15 Sep 2000, Kirill Frolov and Nicolas Davidov were thinking on the topic:
AOH do you understand
ND>> oh well. Monique will also burn in vain if she hangs out next to the computer and
ND>> doesn’t go somewhere...
KF> Yes, we need to output the information via a link to the pussy...
:) hmm, I didn’t think of that ;)
Message Return, CompoWellcome. at: 2:5085/1.149
2:5085/26.51
I’ll explain it popularly :))
The AOH is in the “don’t touch the handset” mode! :). I am registered in the log and in AON.
Aleksandr
ND> I bet... they also want money for this program (?)...
Petertar is a local telephone company. There they charge money for using
the aon.
ND> then the hesnik is a voice nad :)
Yes, but there is not much difference... If the spec had
more megabytes and megahertz, then it would be possible for him to emulate Wicomm on a voice modem
.
AM> I’ll explain it popularly :))
AM> The AOH is in the “don’t touch the tube!” mode. :)
aka 'normal mode'? :)
AM> Speck is standing with MMDey, and he’s also babbling something :)
how is it, both mmd and haesnik at the same time? :-/
AM> The user calls the station.
AM> MMDya picks up the phone, identifies the number (AOH at the same time does the same
AM> the same
AM> ;)))))))
and who is faster? ;)
AM> As a result, the person’s number is registered in my log and in the AON.
well, well, brothers of the znetchers... ;)
KF> Yes, but there is not much difference... If the spec had megabytes, would four megabytes be enough? ;)
KF> more megahertz, then it would be possible for him to have Wicomm on a voice modem
well, there is no more than 7mhz + wait :(
KF> emulate.
why emulate Wicom? A voice modem will have more possibilities...
AM>> :)))))
ND> hmm... the quality will probably be bad... it would be better if the voice hacker
ND> were supported.
Tiny problem - the voice comes out from the voice hacker already in
encoded
(compressed) form. And if you want to decode it, then there will be big
problems on the spec:
these algorithms require quite a few resources by Spectrum standards...
20 Sep 00 13:20, Nicolas Davidov -> Kirill Frolov:
ND> why emulate Wiccom? a voice modem will have more possibilities
ND>...
No:(
Most voice modems are not able to send one byte per line. There
a block of data is transmitted immediately and often with compression. And the voice modem switches between
reception and transmission relatively slowly.
So in order to emulate Wicomm on the Spectrum, you need to install a softmodem, there with
a better voice, but in any case the power of the ZX is not enough for him.
With respect, Evgeniy.
ND> how is it, both mmd and haesnik at the same time? :-/
Hmm...
I’ll explain it popularly.
In Tmyla, in the configs there is such a line “when to answer
when calling.”
In MMD something similar has been done.
AOHy says generally simple - from 20:30 to 07:00 forget about auto-raise.
And that's it!
The clock is out! ;)
Why does Spectrum need these capabilities? And emulate Wicomm for communication with
Vicomm people.
ND>> there will be more...
EP> No :(
EP> Most voice modems do not know how to send one byte per line.
Is this necessary? Because of compression they cannot.
EP> There a block of data is transmitted immediately and often with compression.
Without compression it will not fit into the serial port...
EP> And the voice modem
EP> switches between reception and transmission relatively slowly.
IMHO with sufficient speed. Of course, I’m not completely sure,
but if it switches between reception and transmission in 10ms,
then this is quite enough!
EP> So to emulate Wicomm on the Spectrum, you need a softmodem
EP> put, there is a better voice, but the power of the ZX in any case
EP> is not enough.
What is better there? That's what you can program it
that's for sure...
Once upon a time, Wed 20 Sep 2000, Kirill Frolov and Nicolas Davidov were thinking on the topic:
AOH understand
KF> Tiny problem - from the voice logger the voice comes out already in
KF> encoded (compressed) form. And if you want to decode it, then
KF> there will be big problems on the spec: these algorithms require quite a few resources
KF> by Spectrum standards...
even so? well, well... does he need to send a packaged voice too?
Once upon a time Thu 21 Sep 2000, Eugene Palenock and Nicolas Davidov were thinking on
the topic: AOH do you understand
ND>> why emulate Wicca? a voice modem will have more possibilities
ND>>...
EP> No :(
what not? Less possibilities?
EP> Most voice modems are not able to send one byte per line. There
is this necessary?
EP> a block of data is transmitted immediately and often with compression. And it switches between
on the other hand, this is correct.
EP> reception and transmission the voice modem is relatively slow.
hmm, but on offtopic and AOH and answering machines are implemented normally.
EP> So, in order to emulate Vicomm on the Spectrum, you need to install a softmodem, then
and emulate it?
EP> with a better voice, but in any case it won’t have enough ZX power.
well then.
Once upon a time Thu 21 Sep 2000, Aleksandr Majorov and Nicolas Davidov were thinking on
the topic: AOH, do you understand
ND>> hmm... the quality will probably be bad... it would be better if there was a voice agent
ND>> supported.
AM> You are reducing everything to chaos...
to what? I don’t consider all sorts of Vicoms/Sidos to be modems.
AM> Are you selling them or something? :)
unfortunately no :( ;)
ND>> how is it, both mmd and haesnik at the same time? :-/
AM> Hmm...
AM> I’ll explain it popularly.
AM> In Tmyl, in the configs there is such a line “when to answer when calling.”
AM> In MMD something similar was done.
I would say that two different machines are working.
AM> AOHy it’s generally said simply - from 20:30 to 07:00 forget about auto-raise.
AM> That's all!
AM> The clock is off! ;)
how do you transfer mail from PC to PC, using floppy disks?
KF> And the sprinter?
and the sprinter is finally something strange... with a price that doesn’t correspond to the capabilities :)
ND>> why emulate Wicom? A voice modem will have more possibilities
ND>>...
KF> Why does Spectrum need these opportunities? And emulate Wikomm for communication with
KF> Wikomm people.
hmm... if you think about it, what a perversion, huh? lower the voice 33.6k haes to
2400 vicom... ;))) 'you'd better come to us' (c) :)
AM>> auto lift. That's all! The clock is out! ;)
ND> and how do you transfer mail from PC to Z, with floppy disks?
Are you still trying to prove that Vicom and Speck are not working?
He-he, I hardly work with mail anymore... I hardly work.
Besides, I work in the evening/at night - at the same time as preparing mail :)
Now sit and think how my mail turns out to be on Speck :)))))
[skipped]
KF>> no need.
ND> translate. because I didn’t understand. how is it 'through one page'?
Just like spec has it now. Through ()() - try to transfer from one
can to the third...
ND> and the sprinter is finally something strange... with a price that does not correspond
ND> to its capabilities :)
It's time to create RU.ANTI.SPECTRUM especially for you...
KF>> already in encoded (compressed) form. And if you want it
ND> even like that? well, well... does he need to send the voice also packaged?
Of course.
22 Sep 00 14:24, Aleksandr Majorov wrote to Nicolas Davidov:
AM> And we consider who will accept it faster:
AM> you on your 3200 with all the YuYUKs,
AM> or the leader on the vicom with CPS 300
AM> (just explain where did you get the figure 250 from?)
AM> but ehy without yuyukov ;)
Right now I have a user with bbski demo, so his CPS is ~190.
If the user had a turbo mode, then ~200. The item is zip-packed,
which means the number of zeros and ones is approximately the same.
ND> hmm, but on offtopic sites both AOH and answering machines are implemented normally.
And there the switching time is not critical.
AM> Are you still trying to prove that the Vikomka and Speck didn’t work?
I’m not trying at all anymore. I’m interested, it will be more correct.
AM> Heh heh, I hardly work with the mail anymore.
what does your “almost” mean? :).
ND>> translate. because I didn’t understand. how is it 'through one page'?
KF> Just like spec has it now. Through ()() - try to transfer from one
KF> jar to the third one...
ah. got it.
A long time ago Sat 23 Sep 2000, Kirill Frolov and Nicolas Davidov thought on the topic:
AOH understand
EP>>> the reception and transmission of a voice modem is relatively slow.
ND> see above, I will provide on ability without ppoblem. Yuyukov.
That you there bopmotal ppo the that bystpee this mysop pump out? ;)
ND> ZY: Wickham - sucks! ;))))
Sam dypak! ;)
Alexander
ND> why would it be critical on spec then?
I’m not talking about caller ID with an answering machine, but about emulating a Vicomm modem.
ND> I approximated it. with a connection of 2400 for haes / with protocols
ND> v42bis and LAPM / maximum DSP 370.
Fairy tales. I had 275 on 2 different modems.
And if with compression, then it happened under 1000, the port was locked to 9600.
ND> Wikcom does not have them - the DSP is much lower.
In fact, the block transmission time there may be faster,
but there are huge pauses between blocks. But Mas doesn’t want to use MMD
to increase the block length to at least a kilobyte or send several
blocks at a time.
ND> PS: Wikcom sucks! ;))))
Like that myself.
Wed. 20 Sep 2000 13:20:45, Nicolas Davidov -> Kirill Frolov:
AM> By pressing a couple of buttons... on the PC, if it was glitched and almost didn’t give Specky
AM>...
yeah, so you have them connected by wires?
ND>> I brought it out approximately. with a connection of 2400 for haes / with protocols
ND>> v42bis and LAPM / the maximum DSP is 370. Wikcom does not have them - the DSP is much
ND>> lower.
AM> Yes, lower. But why 250????
how much? The theoretical limit is 300. but it is never achievable. explain
why?
AM> Do you know what the numbers 2400 mean, and what relation do they have to bytes in the
AM> course?
ja-ja, in the know. so what?
KF> Fairy tales. I had 275 on 2 different modems.
You should first read the faqs on momeds, and only then talk about fairy tales. I can
substantiate my words, and you?
KF> And if with compression, then it happened there under 1000, the port was locked at 9600.
of the goats, we are talking about working with protocols.
ND>> Wikcom does not have them - the DSP is much lower.
KF> In fact, the block transfer time there may be faster, but There are huge pauses between
KF> blocks. And Mas doesn’t want to increase the block length in MMD, at least
KF> to a kilobyte or send several blocks at a time.
especially, and AM doesn’t believe that Vicom’s CPU is 250 ;)
KF>>> more megahertz, then it would be possible for him to wicomm on
KF>>> voice modem
ND>> well, there is no more than 7mhz + wait :(
I have was :)
Until not otpabotal night YuYKogpiz mail in base was yyma.
And on Spekk ZX flew small. Alexander
24 Sep 00 06:43, Nicolas Davidov -> Kirill Frolov:
[skipped]
ND>>> hmm... but how does this 'name' work! :)
KF>> In some cases, it doesn’t work on our PBXs, but on
KF>> a good wicomma produces a stable connection.
ND> well, well, although this is doubtful...
Don’t doubt it.
I myself know a couple of points where the wicomka connected
to ypa, and haes they're buggy...
[skip]
ND> even more so, and AM doesn't believe that the CPS of Vicom is 250 ;)
Did you measure the CPS of Vicom yourself, or what?
Aleksandr
By the way, yes. My chaos with my boss fits creakingly at 4800, and not the first time, while I failed without problems at 2400. And EMS also has an RLE package =)
WBR, Jason.
[Team Obituary][Team Friday 13th][Team Evil Maniacs][Team Huge Axes]
KF>> there are huge pauses between blocks. But Mas doesn’t want to increase the length of a block
KF>> in MMD, or at least increase it to a kilobyte or send several blocks
KF>> at a time.
ND> even more so, and AM doesn’t believe that Vicom’s CPU is 250 ;)
He doesn’t have a display meter for measuring, but I do.
you will definitely be made a moderator there! even if you refuse... :)
*Cya!* Sincerely, Midi^Energy Minds
[I ZX]
[/Energy Minds Team/] [/Freedom Team/] [/X-Project Team/] [/Beer Rulezъ/]
... e-mail: [/*mid...@usa.com*/]^[/*mid...@mail.ru*/] _/ICQ: 91856284/_