About people mailer from terminal
ZXNet echo conference «real.speccy»
Immediately click on RESET, All !
I believe this may be interesting:
+----------------------------------------------------------------
|Forwarded by Kirill Frolov (2:5030/827.2) at 01:15, 12/Dec/99
|Area : ZX.SPECTRUM (ZX.SPECTRUM)
|From : Vladimir Burenin (2:4621/10.55) at 12:51, 10/Dec/99
|To : All (2:5030/827)
|Subj : About people mailer from terminal
+----------------------------------------------------------------
Hi, All !
2EM: as you read This way you will understand that macros are needed like water, and preferably
of any length, 255 characters are probably enough.
And so, dear readers, due to the fact that I have already started to get a little
of requests about how to pick up mail with a terminal, I will give a description of this
process.
In principle, I only used it for UNIX cars, but it should work everywhere.
And so, I’ll start with abbreviations
**EMSI_DAT004E{EMSI}{2:4621/10.55}{password}{8N1}{ZMO}{FE}{M}{1}{U}{IDENT}
{[][][][-][][XA,V42B]}26B0 - DAT your data
**EMSI_INQC816 - INQ incoming request
**EMSI_REQA77E - REQ in my opinion outgoing confirmation for the request
**EMSI_ACKA490 - ACK confirmation DAT
**EMSI_NAKEEC3 - NAK in case of absence of any data or
in case of incorrect data
AT THE END OF EACHLINES ENTER !!!
And this is how I describe the whole process:
1. send INQ to the login request, in response you will receive a REQ, then you
send your DAT (I fit into 3 macros), the boss will send you an ACK, or if
incorrect data (incorrect checksum, nonsense...etc.), and after the ACK the DAT from the boss will fly to you, to which you respond ASK, and immediately the boss's car is set
to receiving your files, after you transfer the files, I advise you to press break, because
otherwise nothing will happen (I don't know how on the PC), after you set to
reception, the boss's car 6 crashes from the receiving state, after that you again press
receive
or spacebar and ALL mail begins to be received.
And so we'll figure it out. what is **EMSI_DAT:
**EMSI_DAT004E{EMSI}{2:4621/10.55}{password}{8N1}{ZMO}{FE}{M}{1}{U}{IDENT}
{[][][][-][][XA,V42B]}26B0
the first 4 digits - who the hell knows the checksum what...
the last 4 digits, again the DAT checksum, I don’t know how to generate it, I
used melon and reduced the line to a minimum.
If it’s not clear, we’ll discuss it.
Vladimir AKA Envoy/PHT
... one head is good, but two are starting to get smart...
-+- Mail editor - Lara Croft 4.40
# Origin: DI:HALT (2:4621/10.55)
----------------------------------------------------------------
It happens... EMSI session purely on macros...
Why after thatDo you still need a mailer?
Kirill [ZX]
KF> Well, it happens... EMSI session is purely on macros...
KF> Why do you need a mailer after that?
So, I don’t know why the mailer for Unix doesn’t work... That’s why I
wrote how to pick up mail with a terminal. And after all, I completely carry out the same
actions in the mailer and fig two... At the beginning the mail is sent, and then waits
to be received... waits a minute and flies out like mail received...
I think I know the problem, but I haven’t found how to solve it yet :(