[0/1] hdd_drv_.h

This file is a module for RC 2.x, or rather it is a hard drive driver
working through open trdos ports + a small utility for connecting/
disconnecting disk images on the hard drive and launching the isdos OS.
After installing the module in RC, the commander will work with the hard drive not
through #3d13 but through ports, speed approximately the same as when working with a frame disk
plus there will be no conflicts with extended memory over 256k.
The utility is called by pressing the "H" key.

control inside the launcher:

ENTER - select\enter the disk image directory
SPACE - exit\exit from the disk image directory to the partition directory
A,B,C,D - select the device to which the disk image will be connected\disconnected
Z - disconnect the disk image from the selected device

to launch isdos you need to hover over the partition to be launched and press
enter.

p.s. I am not the author of the HDD driver itself; this driver is an original ide_smuc.blk by Valerij Kozhevnikoff, I just adapted it
for implantation in RC plus sketched out a disk mounter.

p.p.s LBA screws are not supported yet, the second (slawe) screw is also not supported yet.

No glitches were noticed during the week of operation of the module.

JTN/4D

AT>> This file is a module for RC 2.x, or rather it is a hard drive driver
AT>> working through open trdos ports + a small utility for