Soft For DMA Sound

Hello Dmitriy! August 31, 2001 (it was 09:53 then) Dmitriy Nesmachny in his letter to Vladimir Karachentsev wrote: VK>> Maybe someone can share the thread :-). Here's a friend of DMA Sound VK>> collects, but there is no software at all. DN> Wow!!! As soon as he collects it, let him share his experience with the public and DN> impressions... please... You can be sure of this. But having collected it, he must somehow test, check, configure. And this process requires a supportive this software device. By the way, this friend already tried to assemble GS... - nothing it turned out, because I assembled it according to the principle of “the wires came out of the forest”, and I did it everything is on the Leningrad board. Because of these uteri MGTF, look for the reasons for it inability to work was not only difficult, but almost impossible. In general, now he has disconnected the board of the analog part. I tried the digital part dissolve in ACCEL EDA, but since I had no contact with this program before, then A lot of problems arose. One of which is to make the spectrum from the PCB work. The bastard swears all the time. And if you use QUICK ROUT, it’s too crooked breeds with a large number of vias. Although I still have one task now, the controller circuit for my brother’s screw dilute. It's the same story - SPECCTRA fights and doesn't want to do anything. TOUnfortunately, the document is available only in English and only in electronic form in PDF format. One hell... - "UNFORGETTABLE FEELINGS" :-))) Best regards, Vladimir September 04, 2001