Programs for modems
ZXNet echo conference «zxnet.soft»
Hello, All
People! Help! Please upload programs and games for Vicomm modema. Organized by
There is communication in the city and the cat is crying for programs. Tell me how to organize a BBS.
Hello, p@lex
ple> for Vicomm modema.Organized
ple> communication in the city. Show me how to organize a BBS.
ple> Address: Rudny
ple>
Greetings and congratulations!
How many real people are already working on Spectrum modems?
Would you like to think about organizing a city branch of the ZXNet network?
http://wlodeks.narod.ru/zxnet/ZXNET.HTM
Hello, p@lex
Here, I collected all sorts of things from the bottom of the barrel :) What is there: MMD2.22 - a program for
dialing up the BBS and crawling around it, Gambit - a game of chess, EMS - like, too
for dialing, but I didn’t use it, AON - AOH ;) It seems that you can also use a modem
I was supposed to play X-Reversy, but I didn't have it. and on Virtual TR-DOS not
something is observed. Even in Spectrofon 9 there was Laser Squad in the app
modem, you could also play it using vicomm. What would
to organize a BBS, you need to have MMD 3 or 4. You need to ask MAS about this (
mas-soft(c)nm.ru), I think it will help. I don't remember anything else about the modem.
File: Vicomm.zip http://zx.pk.ru/attachment.php?attachmentid=1932
Hello, p@lex
ple> People! Help! Throw in programs and games for Vicomm modema. Organized
ple> there is communication in the city and the cat is crying for programs. Show me how to organize a BBS.
mailto: 500:812/1.507 - then I’ll give you the programs. And then suddenly you’re a messenger from
competing IBM-PC platform, stifling the development of ZX-Spectrum?
Hello, Maksagor
> Was there a modem version of THE LAST BATTLE? True under what
> exactly the modem, and whether it really was - I don’t know...
Was under Vicomm & XTR.
Hello Greyiron
gre> Even in "Spectrophone 9" there was a Laser Squad modem in the application
gre> could also be played using vicomm.
Was there a modem version of THE LAST BATTLE? True under what exactly
modem, and whether it actually existed - I don’t know...
Hello, All!
In Kirov we have a network on C-DOS modems, and I wrote several for my X-Dos
toys. Mostly logical, and one “almost strategy”. The burner is used
modem from EMS, and therefore you can probably play on other modems. If someone
interesting. contact me (you can go to thennnereal.ru). Although I once
I threw it in ZXNET.UUE for a long time.
We use EMS as a BBS, a good program. But with MMD
I can’t compare it, because I haven’t seen its normal versions.
See you again! Best regards, Thann.
Hello, All
Ale> We use EMS as a BBS, a good program. But
Ale> I can’t compare MMD, because I haven’t seen its normal versions.
EMS is resting! =)
Hello, p@lex
ple> but Gambit on one computer is reset immediately after the first
ple> progress-reception of data and only via modem - I don’t know what’s wrong
Is the driver the same one that works normally with EMS?
Hello new art
Is the driver the same one that works normally with EMS?
The driver was not from EMS, but was from Gambit.
Hello, p@lex
People! Can anyone explain why I have EMS2.55+ in terminal mode?
VICOMMe sometimes does not receive individual characters.
Hello, _/Alexander/_!
December 12, 2005 04:16, Alexander Pekhimenko wrote to All:
AP> People! Maybe someone can explain why I’m in terminal mode B
AP> EMS2.55+ on VICOMMe sometimes individual characters do not reach.
What is the speed? Try lowering it. The point is that when transferring
individual characters there is no confirmation of successful transmission. And if there were,
It would be impossible to print normally due to the brakes.
See you again! Best regards, Thann.
Hello, All
Ale> The modem driver from EMS is used,
The modem driver from MMD and EMS is almost the same. If not used
later extensions (caller ID, interrupts, something else...),
then everything is compatible except for one thing: the speed selection function. In MMD it is
always works exclusively at first speed only, in EMS
also some glitches. But in any case, one driver is easily converted into
another.
Hello jtn
jtn> 1. high speed-interference
jtn>
Signal distortion. High frequencies are cut, phase distortions occur.
It would be possible to introduce biases and compensate
somehow in the receiver, but no one ever did it. Yes and bars
not really enough. Plus the coding method is stupid. It's easier with a comparator
It would probably be better to do relative phase modulation with relatively
low baud rate and a correspondingly large number of states. Plus
some code
for error correction.
And also distortions in the Vicomm amplifier itself. Often without it
and it worked better without any filters. Of course the filter is upper
frequencies are needed, but on the other hand, this is again phase distortion
signal, depending on the frequency, and since both
important for vicomm... It is better to choose a filter with a uniform
phase characteristic in the “useful” frequency range of the signal and sufficiently
high cutoff frequency, about 16KHz. It's "interference"
there are usually none as such. Interference can be understood more often as
crackling (signal loss for tens of ms) - no filters here
will not help, or the “radio” and conversations of other subscribers: but then quickly
Excessive signal amplification is harmful. Of course you can build
filter exclusively for speed frequencies 1800, 2400 (1200-3400Hz) but, as I
said above, the phase characteristic on
this area is of great importance.> 2. the driver must be tailored to the temporary setup of your computer (available for
> scorpio, pentagon...). or it’s possible that computers just have quartz
> are very different
If it’s not turbo, then it’s more likely no than yes. 13/15 is probably
the largest scatter of quartz. Not that much.
Hello new art
new> Was under Vicomm & XTR.
After all, you're burning. For modem driver from MMD.
Hello, p@lex
1. high speed - interference
2. the driver must be tailored to the temporary settings of your computer (there is one for Scorpio,
Pentagon...). or perhaps it’s just that the quartz on computers is very different
Hello, _/Kirill/_!
December 12, 2005 1:39 pm, Kirill Frolov wrote to All:
Ale>> The modem driver from EMS is used
KF> The modem driver from MMD and EMS is almost the same.
Yes, I know. As for the speed - in my games the minimum is always set (600),
since little information is transmitted. Chat even wastes more modem time than
the games themselves.
See you again! Best regards, Thann.
Hello fk0
I dug through old archives and found a driver for mmd 4.00 (pulled from Gambit)
I plugged it into mmd2.22. I got the modem 3+ working with Wiki with all the bells and whistles. Can anyone tell me where?
take version mmd 4.00 and why is it better?
Hello, p@lex
People, tell me. In the driver for MMD 4.0 there is a speed link in the menu, and
also 1800+,2400+ - what does this mean?
Hello, All
My speed was 2400 everywhere. What’s interesting is that there was a glitch with characters disappearing
me on a simple modem with a transformer. Now I soldered the modem according to the diagram
Vicomm3+ modem this glitch disappeared, but a new one appeared. If you transmit through 48
BASIC via save-load then gives a loading error at the end of receiving the file, although
the BASIC file itself seems to have been transferred normally and the laser platoon does not play. But EMS and
MMD 2.22 work fine.
Hello, p@lex
People! If you have any modem software, don’t be sorry.
In particular, I’m looking for games for Vicommodem (X-reversy.battle ships). And for some reason I have
laser platoon does not play, although Modem TR, MMD, EMS work perfectly on 2400.