HoneyCom

Hello _All_! And this is a list of differences between the Novosibirsk version of the subject. Do you need a commander himself? /*─═>/* Here begins hcinfo.$t /*<═─/* Greetings to all computer users ZX-SPECTRUM. I present to you the remade me the program Honey Commander v4.0 Now it will work on any machine with a RAM volume of 128 KB. and higher. Here is a list of all changes and improvements: 1. If the TR-DOS ROM has a com- Manda for reading the status register: #3C30 DB 1F IN A,(#1F) C9 RET then it will work with it, otherwise the register status will be determined by call subroutines in TR-DOS. Also, in the original le Honeya has the opportunity to read it from cache: then address #3DFD should be NOP : RET, and at any address in the cache you need write down: DB1F IN A,(#1F) CB67 BIT 4,A C9 RET Although for some reason I don’t want to work with the cache nerd. 2. Built-in AUTOCONFIG, which launches at the very beginning and checks the computer type yuter and availability of free memory. Under construction table of availability of real(!) memory pages (i.e. missing pages are excluded - in PROFI, for example, there may be holes of 256Kb.) and the driver is installed to switch them values: PENTAGON - if you hold while loading CAPS SHIFT, then it will be checked 1024 KB. 5,6,7 bits of port #7FFD. If you have latch is not skewed, it will reset with the message statement about the impossibility of working in 48 KB mode.If you do not press anything, then up to 512 KB is checked. SCORPION and KAY are supported up to 1 MB. PROFI - up to 1 MB. ATM-TURBO 1 and ATM TURBO 2+ - same as and in the original. 3. Resident can be installed on any computer if you have the necessary pages (#1B, #1C, #1D, #1E, #1F). Also, if when loading ke push 'I