HDD Driver
ZXNet echo conference «zxnet.soft»
Hello, CHRV
CHR> Be sure to write the model!
CHR> If this is for NEmoIDE, then you need to take the system from Ilyasov.
By the way, Roman. There is an idea for those who buy an IDE controller from you,
deliver it with a floppy disk where these programs will be recorded (i.e. the tuner and
driver) - that is, as is usually done: a piece of hardware with the necessary firewood is sold.
Naturally, the system itself will not be on the floppy disk.
Ask Ilyasov’s permission on this matter...
Hello, Maksagor
> By the way, Roman. There is an idea for those who buy an IDE controller from you
> deliver it with a floppy disk where these programs will be recorded (i.e.
> customizer and driver) - that is, as usual: for sale
> piece of hardware with the necessary firewood. Naturally, the system itself on the floppy disk is not
> will be.
>
> Ask Ilyasov’s permission on this...
Already asked!
Drivers are NOT SUPPLIED separately from the system.
I wanted to reach an agreement with Vega regarding CDWALK, but he put the brakes on this matter.
Hello, CHRV
CHR> Drivers are NOT SUPPLIED separately from the system.
CHR>
But they don’t deliver what you need :)
> 1.1. iS-DOS'2000: The newest version
> Classic (with directory extensions) +
> all Chic options: KAY, Profi and Chic-ZS
> for Scorpion + HDD drivers for
> SMUC/Scorpion (Classic and Chic).
>
Hello, CHRV
CHR> I wanted to reach an agreement with Vega about CDWALK, but he let it go
CHR> on the brakes.
A little off topic. In what form should ZX software be recorded on CD for all this
was considered CDWALK?
Hello, CHRV
CHR> Be sure to write the model!
CHR> If this is for NEmoIDE, then you need to take the system from Ilyasov.
Yar> And the ones supplied are not what you need
How can this be!? Where can I get them then???
Hello, CHRV
CHR> Well, and one more thing, if you want to write from CD to floppy disks, then files
CHR> TRDs must not be zip-packed, of course. :).
iS-DOS and TASiS (that is, not only on ATM) have an UNZIP unpacker...
Hello, Maksagor
> iS-DOS and TASiS (that is, not only on ATM) have an UNZIP unpacker...
yeah, and in trdos he also knows how to deconvert the hobeta and write trdo directly on
disk
Hello, CHRV
CHR> Already asked!
CHR> Drivers are NOT SUPPLIED separately from the system.
But if someone, regardless of Ilyasov and the source code of old firewood, writes his own
own driver for the Nemov IDE, then Ilyasov is prohibited from distributing it
can’t... That’s true... Just a note.......
Hello Yaroslav
Yar> You need the screw driver ide+.blk and idetune.com.
I remember that, it seems, the subject was part of an appendix to one of
ZX-FORMAT'ov (it seems there was even ide+3.blk. Well, and a customizer, of course).
You just need to pull it out from the hard diskette, and then
rename as needed, calculate the checksum and check if it’s lost
whether the starting address when copying.
Hello Yaroslav
Yar> But the ones supplied are not what you need :)
There is also firewood for Hemo-IDE. When ordering, just specifically specify about them.
Hello, Maksagor
> There is also firewood for Hemo-IDE. When ordering, just specifically specify
> about them.
I sent soap to Ilyasov. I’m waiting for an answer.
Hello Chunin!
December 26, 2005 (it was 1:35 pm then)
Chunin Roman in his letter to All wrote:
CR> Drivers are NOT SUPPLIED separately from the system.
CR> I wanted to reach an agreement with Vega about CDWALK, but he let the matter go to
CR> brakes.
I didn't let it down. The program supports SMUC and Nemo controllers, the latter
versions - built-in ATM controller.
FIDO: 2:5030/1512 ZXNET: 500:812/19 E-mail: vega56@mail.ru ICQ: 144932679
Moderator of Ru.Baika, Moderator of Ru.Etymology, CoModerator of Ru.Masyanya