frequency meter instead of a program

Hello, captain cobalt cap> >What if there is more? Much more. cap> This is more bad than good. What? And if you need to perform applied drilling, especially modern ones. cap> > ..I have caching of a section of video memory, i.e. stops cap> processor cap> > ULA does not work! cap> How does braking occur? No way, and if you mean compatibility mode, then it is inhibited by the duty cycle or frequency of your choice. Where there is duty cycle, there are no problems with memory access for ULA. Writing to the cache memory occurs only when accessing memory areas screens. Yes, at other times the cache is not available to the z80, not at all. cap> Always? cap> Or only when there is a collision in certain areas of addresses, then cap> which ones? cap> For example, on 128 machines, four out of eight 16K pages are slow. There is no braking. cap> >Until there is a test, it is difficult to talk about anything. cap> There are no “standard” tests. cap> Each iron worker must write tests to check specific ones cap> features of its hardware solution.cap> Some tests were mentioned here. Thanks, I pumped it up and I'll take a look. Yes, on the topic of what’s a little higher... I’m a hardware guy for whom it’s easier, much easier connect the clock generator through a logical element "and" before or after the arrival INT and measure the number of cycles with a frequency meter.. you can measure by cycles, you can measure in cycles..