From
SMT
→
To
All
8 March 2006
Hello, Vladimir Kladov
there are exactly twice as many clock cycles, but the processor doesn’t see them all, because it’s very
It's WAITING a lot. actually the degree of turbochargement is 1.3-1.7 (maybe if the ram is completely
statically, craftsmen can make exactly 2x, but such spec models are piecemeal).
debug so that multicolors work in the turbo the same way as in real life, you’ll be exhausted
for each individual turbo scheme
From
Andrey Alexandrovich Titov
→
To
All
8 March 2006
Hello, Vladimir Kladov
Vla> How did/is it possible to get 50Hz on TV? clock generator
Vla> from the board?
The TV has and always has had 50Hz: v2_biggr:
From
Vladimir Kladov
→
To
All
8 March 2006
Hello, All
I didn’t attach much importance to this before. I just naively believed that turbo -
it all works twice as fast. Somehow it took me a little while to realize that
The TV will generally not be able to show more frames per second. (What,
Are TVs really 50 frames per second? Another misunderstanding. Looks like it was 24. Or
25? I'm completely confused.)
Those. what I want to confirm or refute: in turbo mode in the frame
it fits _exactly_ twice as many cycles as in normal speed mode. A?
(I see a turbo that is turned on by a toggle switch like on my old
Spectrum, and software for output to the port - depending on the model. I hope
here at least the principle is the same...).
From
Vladimir Kladov
→
To
All
8 March 2006
Hello SMT
Yeah, that is. multicolor to the left, turbo to the right. And what is written in
The documentation for ATM and Scorpio states that turbo = 7 MHz, so wait is not taken into account.
I see. The answer means "not exactly twice." And on TV it’s like 50Hz
did/is it possible? clock generator from the board?
From
Konstantin Zhukov
→
To
All
8 March 2006
Hello Titus
In KAY, Scorpio and ZX-NEXT schemes, the processor frequency is reduced in turbo mode
up to 3.5 MHz when commands that operate on ports are executed, because many
peripheral devices are not capable of operating at high frequencies (for example,
BB55). Therefore, if the program consists only of commands like out(c),a
There will be no performance gain at all. Increase in speed exactly
twice in Scorpio and KAY will only be when the processor is working with
ROM (since there are no conflicts with the video buffer in RAM).
From
SMT
→
To
All
8 March 2006
Hello, Vladimir Kladov
Vla> How did/is it possible to get 50Hz on TV? clock generator
Vla> from the board?
and the turbo does not affect the image formation circuit. maybe a read cycle
data from RAM either needs to be shortened to give the processor more time, or
slow it down every time you use it
From
SMT
→
To
All
8 March 2006
Hello, Vladimir Kladov
then what's the point of declaring turbo emulation, it's enough to raise the clock cycles by
frame by 1.5 times (and, for good measure, increase the line size in clock cycles by 1.5 as well
times)
From
moroz1999
→
To
All
8 March 2006
Hello, Vladimir Kladov
Vla> 50 in TV means. It was probably the rumors about the 25th that mythologized me.
Vla> frame.
Vla>
on the TV the refresh rate is 50 hertz, but every logical frame
consists of two so-called half-frames in such a way that to form
a complete picture requires 2 hertz. Hence the real actual 25 frames per
second at physical 50Hz.
From
Vladimir Kladov
→
To
All
8 March 2006
Hello SMT
Well, a simple example: a deme can, for the duration of decruitment (that’s what it’s called, I think)
turn on the turbo, then turn it off and start showing off your charms...
Why do you have to wait longer in emulation than in real life? (Even better is to enter the option:
soft turbo coefficient, and let the user push it there at least 1000%...)
From
Vladimir Kladov
→
To
All
8 March 2006
Hello SMT
Well, in the emulator you can still do such things waits, take all sorts of things into account, but what’s the point?
anyway, they don’t make multicolors specifically for the turbo :) Speed it up 2 times and
of all matters.
50 in TV means. It was probably the rumors about the 25th frame that mythologized me.
10x to everyone, I'll think about it further. (I read the port layouts from ATM and
Scorpio, so I thought about the turbo). Now I’ll shake everyone again about
video modes - in another thread 8-]]
From
Andrey Alexandrovich Titov
→
To
All
9 March 2006
Hello, moroz1999
mor> on the TV the refresh rate is 50 hertz, but every logical frame
mor> consists of two so-called half-frames in such a way that for
mor> formation of a complete picture requires 2 hertz. Hence the real
mor> actual 25 frames per second at physical 50Hz.
This is not entirely true. The TV will normally show a 50Hz video source,
and 25Hz consisting of two half-frames.
From
Vladimir Kladov
→
To
All
9 March 2006
Hello Titus
I was wondering if a turbo could partially solve the problem of slowing down in
games that still use EI HALT. If objects increase,
many are starting to slow down. What I did there in the emulator should, in theory,
It would be even better, but many things simply stop working.
From
Andrey Bogdanovich
→
To
All
13 March 2006
Hello, Vladimir Kladov
It’s also worth mentioning that turbo braking is only in RAM, in
Shadow RAM turbo gives exactly 200% acceleration. There is even a mod player (or maybe
not one) this is taking into account.