Advanced Voice Courier 56K v2.1.6

Hello All! Looks like the era of IDSDL is over... === Home Windows Clipboard === General information and distinctive features of Advanced Voice Courier - voice mode (#CLS=8) for recording/playing sound - identification of the caller's number (Russian AOH) - #CID emulation mode for software compatibility, supporting the CallerID standard - automatic detection of the type of incoming calls data/fax/voice - determination of the remote modem manufacturer identifier (Remote Manufacturer ID) - emulation of PBX signals (long beeps) with volume and frequency adjustment - adjust the gain and sensitivity of the modem - voicing overtraining during communication - improved DIALTONE/BUSY detection on non-standard lines - adjust the speed of pulse dialing - DTMF password for the session, to protect against ATS operators - shortened connection statistics - complete preservation of all communication protocols inherent in Courier modems: HST, V22bis, V32bis, V32terbo, V34+, x2, V.90, V42/V42bis, MNP. The firmware is available in two types: - with original DSP code version 3.1.2 (1998, firmware 09/12/98) and supporting x2 and V.90 protocols. This DSP code is the best way to recommended itself when working on V.90. If your communication line does not allow modem work on this protocol, it is recommended to use the firmwarewith old DSP v1.2.6 code - with the original DSP code version 1.2.6 (1995, firmware 01/11/95), which is the most stable on bad lines, although it does not support high high-speed protocols x2 and V.90. ===End of Windows Clipboard === Best regards, Evgeniy.