0x168 fourth ide interface

Press RESET immediately, All! There is an ESS1868 sound card, it has a connector on board IDE HDD. I connect the screw there, load Linux - no such device and doesn’t even try on ide3 nothing connect, about ide2 it says ports alaways in use. Kernel 2.4.18. Earlier on 2.4.5 itself found and connected the hard drive installed in this way. cat /proc/ispnp says: Logical device 3 'ESS0002:Unknown' Compatible device PNP0600 Device is not active Resources 0 Priority preferred Port 0x168-0x168, align 0x0, size 0x8, 10-bit address decoding Port 0x36e-0x36e, align 0x0, size 0x2, 10-bit address decoding IRQ 12 High-Edge How to make the device active and tell it to find the interface there? ide3=10x68 at loading doesn’t help, and I don’t want it that way - there might be a pluginplay card and a port there what a mess! ps: How can you explain in Dosa or Windows 95 that there is a screw on the same port? This is the same PC interface according to the 4th IDE standard. In dosa plugenplay configured special program. I don't have any special drivers.