.

Good afternoon Costa, To each his own. - BUT NOT FOR EVERYONE bleak - there are two reading options: 1.wrong spelling, correct: "U! GLUE!!!" ett kada tray got a hole in it, dragged it ashore, dug through everything, but there was no glue. I got off route, we arrive home, you take apart your clothes... and then the real (top, bottom) ... 2. the fish is like a chebak, only not so heavy. about five hundred pieces, put them in a big box and go home, satisfied. I had a blast fishing and it wasn’t hard to go. -- Best regards, Zhernyakov mailto:zhernyakov@pgaz.ru

you write beautifully! and sotik I’m not “disappeared somewhere...”, and about...(BEEP) on...(BEEP)...er!!! Never mind, it happens. -- Best regards, Zhernyakov mailto:zhernyakov@pgaz.ru

Hello Alexey! 31 Jul 06 16:24, you wrote to Alexander Bondarenko: AZ> you write beautifully! AZ> and sotik I didn’t “disappear somewhere...”, AZ> and about...(BLEEP) on...(BEEP)...er !!! AZ> never mind, it happens. it's an everyday matter Bay W.B.R. ^rNd^ [Team: X-Tension] [FREE] [BSB] [GMD]

I sorted out the mail. I didn’t clear where the ides were pulled. Here you have some hints with tricks in fashion, I’ll throw in mine: don't pull the cat's tail... you'll tear it off -- Best regards, Zhernyakov mailto:zhernyakov@pgaz.ru

*Hello, Alexey!* Catch my ideas about the subject ".", which yours was talking about on 04 Aug 2006 foot wrap for comrade Alexander Bondarenko. AZ> I sorted out the mail. I didn’t clear where the ides were pulled. On the Chusovodstroevsky Canal. You should periodically look at the subject (subject of the letter). :) /That’s all, Alexey, you can scroll further.../

Good afternoon Alexander, -- Best regards, Zhernyakov mailto:zhernyakov@pgaz.ru

*Hello, Alexey!* Catch my ideas about the subject ".", which yours was talking about on 17 Nov 2006 foot wrap for comrade Alexander Bondarenko. AZ> Good afternoon Alexander, AZ> -- AZ> Best regards, AZ> Zhernyakov mailto:zhernyakov@pgaz.ru AZ> --- AZ> * Origin: (500:3432/3.21) Yes, we caught your picture, don’t worry! :) /That’s all, Alexey, you can scroll further.../

Hi everyone people! Happy spring everyone!!! Well, why the hell did you hatch ICE FISHING in the monitor? YARD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Then you will read what I sent you. -- Best regards, Zhernyakov mailto:zhernyakov@pgaz.ru

Good afternoon Alexander, Yesterday I was driving from E-burg in the evening. On the right, the Iset was half opened. closer crazy penguins are sitting on the left bank. People in the bus are joking: "in *beaten!!!" I bought paddles. My hands are itching: they want extreme sports on my ass. -- Best regards, Zhernyakov mailto:zhernyakov@pgaz.ru

*Hello, Alexey!* Catch my ideas about the subject ".", which yours was talking about on 06 Apr 2007 foot wrap for comrade Alexander Bondarenko. AZ> yesterday I was driving from e-burg in the evening. On the right, the Iset was half opened. AZ> crazy penguins are sitting closer to the left bank. I passed there today - the same picture, only penguins among the kayakers repurposed. AZ> the people in the bus are making fun of them: “they are *beaten!!!” Well, the same can be said about kayakers - no, not on forest rivers drive, so they are toiling around with bullshit within the city limits. And even in this turd. AZ> I bought paddles. My hands are itching: they want extreme sports on my ass. Well done! By the way, what kind of oars are they and how much? /That’s all, Alexey, you can scroll further.../

AB> Hey so! By the way, what kind of oars are they and how much? E-burg went all over, erased his legs, naturally. I bought Ufa ones, folding ones. I’m thinking of strengthening them and drilling them. I was tweeting with a guy from a sports store, he praised the tray and said what he had dad also. and I solved the problem of the oars this way: I ordered it to be planed solid wood. And he advised putting more shovels, like it’s more convenient. -- Best regards, Zhernyakov mailto:zhernyakov@pgaz.ru

*Hello, Alexey!* Catch my ideas about the subject ".", which yours was talking about on 09 Apr 2007 foot wrap for comrade Alexander Bondarenko. AB>> Hey so! By the way, what kind of oars are they and how much? AZ> I went around the entire e-burg, erased my legs, naturally. AZ> I bought Ufa, folding ones. I’m thinking of strengthening and drilling them. Lyokha, a good thought comes later. I didn’t realize something at your house, but I’m sitting and thinking right now. There is probably no point in strengthening it. Our paddle gets wet and then dries. In general - on my oars, where we were The tubes are on, everything is already dry and hanging out. Even the shoulder blade is dangling. U It's probably still hard for you. I'm thinking - if you drill it, how would it then Finally, it didn’t crack. What I would do is to use composite technologies. In short - I would remove it sand all the paint off the shaft. I would fill the joints between the tube and the wood with superglue Contact (not gel!) - it is absorbed into the wood (as I did with an ax - it y Now I’m not drying out at all). The ends of the shafts sitting inside the tubes too I would fill it with some kind of adhesive impregnation to remove moisture. You can put polyethylene there drip the burning one - just don’t overdo it, the main thing is that the retaining bracket is then fit. Then the shaft is completely saturated with some kind of drying oil (like right now for wood in construction stores has some kind of water-repellent impregnation). And thencan be painted. And I would wrap the joints between the pipe and the shaft with electrical tape - for thickening water protection of this place. Well, in short, think about it, but the essence of my technology is that the adhesive contact itself when it froze it was a stone. And here he will still be sitting in the pores of the wood - composite material type. :) AZ> I tweeted with the guy from the sports store, he praised the tray and said what the hell AZ> his father too. and I solved the problem of the oars this way: I ordered it to be planed AZ> solid wood. And I advised putting more shovels, it’s more convenient. At one time I saw carbon fiber oars in sportswear - something like two years ago they are nowhere to be found. If only they appeared in stores right now, they would grab it and you wouldn’t even be scratching your head. ;) And so I'll have to process my own. Only I don’t know what kind of impregnation I need for the wood. /That’s all, Alexey, you can scroll further.../

AB> At one time I saw carbon fiber oars in sports equipment - something like that for two years already AB> as they are not found anywhere. At Shartash they sell lyamine ones, 450 rubles/piece. material - yes, good execution - bullshit: they just drilled a hole in the tube under Yaroslavl rowlock... I would have torn off my hands! For some reason there are no imported oars for sale. the mounts are the same as in Yaroslavtsev, the funniest thing is the fasteners on the duralumin oar ALSO PLASTIC!!! doesn't it really break??? AB> But I don’t know what kind of impregnation I need for wood. I removed the blades (after I drill the holes for the oarlocks I will put them on sealant), poured waterproof glue into the connecting tubes. The joint leaked, I had to wrap it with tape so that the glue would remain inside. I won’t strip the wood, I’m thinking of varnishing the top and nah. I reinforced the location of the future hole by wrapping synthetic tape impregnated with epoxy. When it dries, I'll drill and sand the hole. Most likely epoxy. how it turns out - Chusovaya will show in May -- Best regards, Zhernyakov mailto:zhernyakov@pgaz.ru

*Hello, Alexey!* Catch my ideas about the subject ".", which yours was talking about on Apr 11, 2007 foot wrap for comrade Alexander Bondarenko. AB>> At one time I saw carbon fiber oars in sportswear - something already AB>> for two years they have not been found anywhere. AZ> they sell lamine ones at Shartash, 450 rubles/piece. material - yes, good AZ> execution - bullshit: they just drilled a hole in the tube under AZ> Yaroslavl rowlock ... By the way! I have a key with a ring. According to the diameter of the shaft of the luminary, it is not possible the same as the ones from Ufa? AZ> I would have cut off my hands! AZ> for some reason there are no imported oars for sale. there mounts are the same as in AZ> Yaroslavtsev, the funniest thing is the fastener on the duralumin oar ALSO AZ> PLASTIC !!! AZ> isn't it really breaking??? It depends on the plastic. There are strong ones - you'll break horseradish. /That’s all, Alexey, you can scroll further.../