Intelligence

*Hello, All!* Today we went to Lake Tavaty for an hour. Of course - we returned without a catch (early more). But on the other hand, tests were carried out on a new nod made from 5-inch shells floppy disks (don't worry - HD floppy disks won't be useful on Spec anyway). This nod was made using the following technology - two plates from shells placed one on top of the other, clamped between two aluminum plates and then They are pressed on top with a special old-fashioned iron (heated on a gas stove). The shells are welded together, and after they have cooled, we cut out the nod a knife for cutting linoleum (using a ruler or hacksaw blade). Then it's With the same knife you can “cut” it under a double cone. Placed on the tip of the nod ring made of colored cambric. That's it. Test results: 1. In the box the fishing rod lay so that it rested with its nod against the partition. We drove to places are about 40 minutes. During this time, the nod was absolutely not deformed. Memory is the minimum possible. 2. In the cold, the nod did not lose its flexibility. 3. Two layers of material were quite enough to support the weight of the heavy jig from my collection. The deflection of the nod was about 30 degrees. 4. With good flexibility, the material of the nod is not excessively soft (which is how times necessary to create the required frequency and amplitude of oscillations for nozzle jig)./That’s all, All, you can scroll further.../