Improved boat.

*Hello, All!* The boat is the most sporty, advanced and progressive tackle for catching surface and predatory fish. Neither spinig nor fly fishing You will never catch it with donkey rods. And this fishing itself is much more more fun than fishing with other gear. At least even because it’s interesting to drive it along the river, and if a fish has already bitten, then there’s nothing to say at all. Fishing is an ancient and tedious thing in itself, but the boat makes it passion of the 21st century, thanks to somewhat “new” views on this sport. Although, to be precise, it was also invented who knows how many centuries ago. Previously only it looked like a thick birch stake sharpened on both sides a meter long... :) In general, it’s been a long time since I threw in the schematics of the ship here last year. Progress does not stand still, and a ton of waste saves 1 tree, hence the subject also occurs. 1. Making the boat itself out of wood is now considered bad form. Best The material for it is 3 millimeter thick vinyl plastic or millimeter thick duralumin. The second is better - stronger. So that the device floats and does not sink, on top of planes Wide and thin foam strips - floats - are installed. Installed they should be either only on the outside, or on the inside, on the contrary In this case, when the fishing line is loosened, the boat will turn across the current, whichis fraught with the fishing line overlapping the plane. The planes themselves are fastened together are bimetal rods, the ends of which are threaded and It's all screwed on with banal wing nuts. That is, it turns out collapsible model, which greatly facilitates transportation. Thanks All this nonsense makes making a boat much easier. Viniplast or in general, any sheet of strong plastic can be found in any store in the system "do it yourself" There is no need to look for polystyrene either, the rod is even easier to find, threads on Only those whose hands grow from the wrong place will not be able to cut it. And firewood no need to spoil it. :) 2. In terms of the dimensions of the planes of the ship. The larger the underwater area - the better - the higher the traction. It turns out that with an increase in the area of the circuit that I then I threw, twice (height of the plane x2), caught a kilogram fish can be easily towed upstream with the line extended in line (which doesn’t happen with that scheme, if a kilogram bites, then the line is in the arc and Even if you twitch, you won’t be able to drag a fish along the surface) The first one (closest to you) the plane can be generally “celebrated”, that is, made of such a height that the foam only held on to it. It turns out that the plane closest to you overlaps the one who stands behind it, so the rear plane is of little use.And due to the fact that there is no load on her, she loves to “jump out of the water when stretch." I compared two options - one with equal planes, and the other with different. The second one, even with a sharp pull, has a stable back plane in the water sits, only rises 3-5 centimeters. 3. Color of the ship. White, white and white again. Only then will the fish be his Either he doesn’t see it at all, or he mistakes it for foam or snow. But I saw it myself - green The ship, coming in for landing, clears out all the little things in the shallow water within a radius of 5 meters away from her, and the white one simply pushes her away if she stands in this great place. Moreover, if he stops, small things will also interest him shows - pokes him lightly. :) 4. Equipment for leeep and leashes. Tie leashes to leer - pervertedism. In this case, everything will have to be unraveled in a single night 20 times per hour. :) That's why we use this tactic - we do it on the rope the place where a leash is needed, a regular figure-of-eight locking knot, then put on there are transparent beads on the rail, then there is also a swivel put on it with one ear, then beads again, and then stop again. From stopper to stopper you have to try make the minimum distance, but I couldn’t get less than a centimeter. Yes So, we tie the leash to the second ear of the swivel. We realized that this is for usgives? The leash can now not only rotate around its axis, but also "jump" over the rail. Only, once a day you still need to check, Because what happens sometimes when jumping, the leash overlaps himself, tying himself around the rail and losing the ability to twist around of its own axis, but it can still jump over without any problems. As for the leash itself, sometimes if a pike grabs, we take the risk lose it because she once over-gnawed the knot with which the hook was in front of me attached to the leash and was like that. That's why there are such things on sale as "tungsten leads". If all the leashes on the boat are equipped at the ends tungsten, then we kill two deer at once: a pike is spotted - you can safely tow her to the cage, and let her put this leash on her ass winds; and if you suddenly decide to change the hook or attach it instead rig, then the fastener at the end (all tungsten leads are equipped with them) will give do this in 0.5 seconds. The only problem that arises when using tungsten is an opportunity to run into a crap Chinese product that breaks under any slight load. Therefore, you just need to look faster. And one guy got us a chain-link mesh made of thin stainless steel wire and solders leashes similar to store-bought ones. He says the steering wheel is immeasurableIt turns out that you can’t break it even if you hit it. But this is suitable for catching large chub, asp and pike. When fishing Hariysa on myshki I haven’t tried to use equipment with tungsten, but it’s more likely He will be least willing to go after mice that have a 10-length wire coming out of their muzzle. see sticks out. By the way, about the length of the “tungsten”. I buy in the store 25 cm long, I buy fasteners according to the number of leashes. Then at home I cut these leashes in half, cut them off standard loops from the halves (in my opinion, they are fragile). Each I bend the ends of the halves by 1 cm and wrap them around the leash itself, so that The loop turned out to be small. The entire place of wrapping, starting from the loop and ending I tie the end of the wrap tightly with thread (I do this by “tying knots", slowly of course, but firmly), then I impregnate the thread with waterproof glue. The result is a handmade loop. Its strength depends on strength of glue in a dried state. Well, naturally, I leave one loop loose (it will be put on a fishing line leash), and on the other I attach a fastener for hook. That's it, I take leashes "at half price" because we sell them from 15 to 25 cm at the same price - 7 rubles. per piece This is, in principle, the whole technology of improvement. The only thing I want I should add that lately I have been poaching - instead of what I was supposed to "not a member" 5 hooks, I hook 7. :)Then, later, I’ll add specific “pictures” here. /That’s all, All, you can scroll further.../