Hard drive for ZX
ZXNet echo conference «sale.zx»
Hello, CHRV
CHR> Gee-gee Western Digital with IDE Nemo (any option) and ATM Turbo
CHR> is guaranteed not to work. Tested by me, Alka and a bunch of other people.
CHR> :v2_rolley
Two stupid questions:
1) who is Alka? :v2_wink2;
2); Do you know about the joke with jumpers on the WDC in the absence of a slave device?
Hello, All
So, there is a 425 MB HDD WDC Caviar. Super size for Spec. :)
I change it to another HDD of approximately the same capacity (or more). In general, the newer
there will be a drive, the better. Although I understand that of course no one replaces it with 10 GB.
The point of the exchange: there is a USB->IDE box, I wanted to stuff it inside it, but
The box turned out to be incompatible with it for some reason. Hard on its own
Absolutely working, box too. Most likely the box controller can't
use very old modes, but the disk does not understand newer ones. In general I
You need a hard drive that will work with the box.
The meaning of the exchange for the second party: let’s say you also have a disk that
for some reason it turned out to be incompatible with your system. But he’s a worker himself
and without any troubles.
Hello, Error404
Err> What works? Is there some kind of list? Or (which is better) some method
Err> - like “everyone like this works, everyone like that doesn’t.”
Here in the section dedicated to the controller there is a table that I checked myself:
http://www.nedopc.com/NEMOIDE/zaknemoide.php
Hello Sonic
Son> So, there is a 425 MB HDD WDC Caviar. Super size for Spec. :)
Son> I change it to another HDD of approximately the same capacity (or more). In general
Son> the newer the drive, the better. Although I understand that there are 10 GB of it
Son> of course no one is replacing.
Son> The meaning of the exchange: there is a USB->IDE box, I wanted to stuff it inside
Son> this one, but the box turned out to be incompatible with it for some reason.
Son> The hard drive itself is absolutely working, as is the box. Most likely
Son> the box controller cannot use very old modes, but
Son> does not understand newer disks. In general, I need a hard drive that will
Son> work with the box.
Son> The meaning of the exchange for the second party: let’s say you also have a disk,
Son> which for some reason turned out to be incompatible with your system.
Son> But in itself it’s working and without problems.
Gee-gee Western Digital with IDE Nemo (any option) and ATM Turbo is not guaranteed
works. Tested by me, Alka and a bunch of other people. :v2_rolley
Hello icebear
ice> Two stupid questions:
ice>
ice> 1) who is Alka? :v2_wink2;
ice>; 2) about the joke with jumpers on the WDC in the absence of a slave device
ice> course?
ALCO = Alone Coder
Yes, you know, I spent almost a day experimenting with WD. What is his trick yet?
figured it out. I want to make it for Penatgon 2.2 on a programmable matrix IDE
controller and play with a sequence of signals (i.e. delays).
Hello, CHRV
CHR> Here in the section dedicated to the controller there is a table that I checked
CHR> itself:
CHR> http://www.nedopc.com/NEMOIDE/zaknemoide.php
Is there a sign that describes models that do not work?
By the way, have similar studies been conducted on CompactFlash? Yes
any statistics on modern CF? Otherwise I bought CF c yesterday
adapter to IDE.
I'm just now trying to assemble the controller myself (more precisely, for a long time
assembled - according to the scheme with 8255 and an inverter). For some reason my software for this
The controller doesn’t want to work in any way yet, I was killed by double-checking errors
I can’t find it yet... Maybe, of course, the error is in the DNA, or maybe the screw is muddy (I
I use an IBM laptop on 250M - it’s working, I checked it on a PC). Here's how
I don’t know if I can rule out the screw as a suspect. And there are no others at hand (so that
collect statistics).
Hello, CHRV
CHR> Gee-gee Western Digital with IDE Nemo (any option) and ATM Turbo
CHR> is guaranteed not to work. Tested by me, Alka and a bunch of other people.
CHR> :v2_rolley
What works? Is there some kind of list? Or (which is better) some method - like
“all these and the like work, all those like that don’t.”
Hello, CHRV
CHR> The topic has already been raised many times, so I will not repeat it.
CHR> There is no desire to argue with those who have not tried either - this
CHR> useless!
Roma, don't panic. You don't have to repeat anything to anyone. And no one tries
throw a stone at your professionalism. If you say that you tested it -
So that's how it was.
2Sonic; Check it out; right here
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=84&p_cr
eated=1005005461&p_sid=49oH*Sui&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zc
mNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9OTIyJnBfcHJvZHM9JnBfY2F0cz0m
cF9wdj0mcF9jdj0mcF9zZWFyY2hfdHlwZT1zZWFyY2hfZm5sJnBfcGFnZT0x&p_li=&p_topview=1
Hello Sonic
Son> Hey... Curious, curious...
Son> I wonder HOW exactly it doesn’t work?
Son> For my part, I can describe the following: Inquiry from him
Son> rolls, information about the device is displayed. But it can be read
Son> refuses completely.
Son> What commands did you use? Maybe the problem is lack of support
Son> any of the addressing modes? Although the idea is that CHS should go everywhere
Son> must...
This sure looks like a WDC joke with jumpers!!!
Hello, CHRV
CHR> spent almost a day experimenting with WD. What is its specialty is not yet
CHR> figured it out.
in ancient times, WD tried to implement its version of the ATA standard, to be precise
what and how I can’t, but the WD screws had a slightly different command system, due to
which some PCs did not understand. This was fixed by updating the BIOS. Who wants
to figure it out - dig in this direction.
Hello, CHRV
CHR> Yes, I know, I spent almost a day experimenting with WD. What is it
CHR> I haven't figured out the trick yet. I want to make it for Penatgon 2.2 on
CHR> programmable matrix IDE controller and play sequence
CHR> signals (i.e. delays).
Hey... Curious, curious...
I wonder HOW exactly it doesn’t work?
For my part, I can describe the following: Inquiry works for him,
information about the device is displayed. But he completely refuses to read.
What commands did you use? Maybe the problem is the lack of support for any of the
addressing modes? Although in theory CHS should go everywhere...
Hello, Error404
Err> By the way, have similar studies been conducted on CompactFlash?
Err> Are there any statistics on modern CF? Otherwise I bought it yesterday
Err> and CF with an adapter to IDE.
It works with CF, although statistics were not collected either
Hello icebear
ice> This sure looks like a WDC joke with jumpers!!!
The topic has already been raised many times, so I will not repeat it. Argue with
Those who haven’t tried either have no desire - it’s useless!