Buy ZX-Spectrum 128
ZXNet echo conference «sale.zx»
Hello, All
I will buy ZX-Spectrum 128kb, music (AY),
a flop (or at worst an FDD controller) is required,
it is also desirable with an extended keyboard, it is possible with a monitor (Electronics
32VTTS202)
Expensive! Urgently!
Hello Pet-Shop
Pet> Buy ZX-Spectrum 128kb, music (AY),
Pet> flop (or at worst FDD controller) are required,
Pet> also preferably with an extended keyboard, maybe with a monitor
Pet> (Electronics 32VTTS202)
Pet> Expensive! Urgently!
http://nedopc.com/ATMZAK/zakatm710.php
A brand new board - brand new, just assembled. Just need a couple
Wait a week for this build to be completed.
Hello, mig'95
mig> I apologize for what may be a stupid question, but what about the keyboard? Her
mig> there seems to be nowhere to take it.. :v2_huh: By the way, maybe somewhere now
mig> purchase a configured Spectrum-compatible complete assembly? I myself s
mig> I'm not very good with hardware, that's why I'm interested..
And there it seems that the keyboard is clinging to the PC.
Hello, mig'95
mig> I apologize for what may be a stupid question, but what about the keyboard? Her
mig> there seems to be nowhere to take it.. :v2_huh: By the way, maybe somewhere now
mig> purchase a configured Spectrum-compatible complete assembly? I myself s
mig> I'm not very good with hardware, that's why I'm interested..
You connect a regular AT keyboard (or a PS/2 keyboard via an adapter,
sold in almost any computer stall). It's on the board
built-in controller. Firstly, it completely emulates mechanical
Speccy keyboard, and secondly, it has a bunch of operating modes, and
supported software.
Well, as for the assembly - so it will be completely assembled and configured, moreover,
if desired, with the entire set of cords (power, sound, disk drives...). Only without
housings. Well, can’t you handle this yourself?
True, I see you are from Moscow. This makes things easier. Therefore, in principle, it is possible
agree on complete assembly in the case, with flop, screw, CD-ROM... But
this is a subject for a separate conversation - if Roman, who is engaged in the assembly,
agree. In any case, then - pickup from the assembly site.
Hello, alexeenko
ale> wow, what's missing
What's surprising here? An ordinary flea market.
Hello, kgbplus
Where did you find the schematics for the spec, can you tell me?
Hello Savage
Sav> Where did you find the diagrams for the spec, can you tell me?
What schemes?
Hello, Maksagor
Well, for the manufacture of the Spectrum (I have schematic diagrams and types of circuit boards in
mind)
Hello, CHRV
Well, thank you all. Yesterday I ordered an ATM-Turbo 2+ assembly from Roman.
I hope that the two weeks of waiting will fly by like one day :smile:
Hello Savage
Sav> well, for the manufacture of the Spectrum (circuit diagrams and type of installation
Sav> boards mean)
Schemes and all design documentation were officially received by Maxim Timonin from
MicroART company.
So I proudly say that everything is not stolen and, one might say, licensed :).
Hello, mig'95
mig> I'll go look for an AT case now.. If I'm lucky, I think in
mig> I’ll write a letter to CHRV in a week. If the assembly comes down to installation only
mig> boards into the case, then I can handle it. Looks like I assembled the PC myself..
mig> :v2_rolley
I highly recommend getting a detailed description of the AT body from Roman, what should you do?
be....
I know from my own experience that it doesn’t fit into everything... it’s true that it doesn’t fit into everything
I wouldn’t even stuff a pussy.... but the main thing is to warn ;)
Hello, CHRV
CHR> Schemes and all design documentation were officially received by Maxim
CHR> Timonin from the company MikroART.
CHR> So I proudly say that everything is not stolen and can be said to be licensed
CHR> pure :).
Eh, can I also get all this officially? :v2_down:
Hello Savage
Sav> Eh, can I also get all this officially? :v2_down:
Easy: http://atmturbo.nedopc.com.
Absolutely everything is on the website.
Stitched HL8 can be ordered from us.
Hello, do_se
Wow! I looked... is the cost with or without a disk drive $100?
Hello, do_se
do_> I know from my own experience that it doesn’t fit into everything....
Oops. What's the catch? :v2_unsur: Actually, I already bought the case and washed it
and now I hope that I won’t have to throw it away..
Hello, mig'95
mig> Oops. What's the catch? :v2_unsur: Actually, I already bought the case
mig> I washed it and now I hope that I won’t have to throw it away..
Look at the dimensions of the board (335x190 mm).
It definitely won’t fit into the BTX, but it should fit into the AT.
Hello Savage
Sav> Wow! I looked... is the cost with or without a disk drive $100?
;) Everything is here:
http://www.nedopc.com/catalog.php
The disk drive is not included, it is implied in PC language:
motherboard with installed processor and memory.
Hello, CHRV
CHR> Look at the dimensions of the board (335x190 mm).
CHR> It definitely won’t fit into the BTX, but it should fit into the AT.
Ufff.. If this is the only problem, then everything is fine with me.. :v2_smile:
Hello, CHRV
CHR> Yeah, first I put three-layer (3mm) plywood and attach the board to it.
CHR> There are no problems with holes and assembly/disassembly after this.
and in my mega-monster I attached the board like this:
marked the places on the chassis where the fasteners should be, then drilled holes there with
small margin compared to the PC part for mounting the board (copper
piece, on one side there is an external thread, on the other internal), then on this
the part itself, instead of the imported one, I cut our Russian thread to 3 mm, inserted it
it's in the chassis and secured it with a nut. Simple and holds up well.
For ATM, by the way, the main problem will be case ventilation, because... the fee is strong
warming up.
Hello, mig'95
My ATM moved to the 3rd AT building in less than a year. The main problem is
fix the board, usually 1-2 holes match, and then you have to be tricky with
"with improvised means". There is another option (I missed it somewhere) to attach
board to the plywood, and screw the plywood as needed inside the case.
Hello, kgbplus
kgb> For ATM, by the way, the main problem will be case ventilation, because
kgb> the board gets very hot.
Yes, it’s a good idea to mount a fan above the memory. ;)
Hello, nyuk
nyu> My ATM has already moved to the 3rd AT building in less than a year. Main
nyu> the problem is to secure the board, usually 1-2 holes match, and then
nyu> you have to be clever with the “means at hand”. There is another option
nyu> (slipped here somewhere) attach the board to the plywood, and the plywood
nyu> screw as needed inside the case.
Yeah, I first put three-layer (3mm) plywood and attach the board to it. Problems with
holes and assembly and disassembly do not appear after this.
For example, this is how it was done for both me and Max.
Hello, CHRV
CHR> Yes, it’s a good idea to attach a fan above the memory.
Well, it's begun! But then what about cooling the bottom row (layer) of osushek?
Hello Savage
Okay, I was joking
Hello, do_se
Let me guess... maybe a cooler?
Hello, do_se
do_> Well, it has begun! But then what about cooling the bottom row (layer) of osushek?
I make a gap of ~1.5mm between the bottom and top rows - so everything is fine
cooling down!
I don’t know, neither I nor Max have a fan and everything works.
Previously, the comparator got very hot, but this was due to a wiring error, read about it
here:
http://www.nedopc.com/ATMZAK/atm710re.htm
Hello, CHRV
CHR> I don’t know, neither I nor Max have a fan and everything works.
Well, for some reason mine is heating up. Although everything works fine if you have _any_
ventilation.
Hello Pet-Shop
Pet> Buy ZX-Spectrum 128kb, music (AY),
Pet> flop (or at worst FDD controller) are required,
Pet> also preferably with an extended keyboard, maybe with a monitor
Pet> (Electronics 32VTTS202)
Pet> Expensive! Urgently!
So do you need a ZX-Spectrum 128kb? (What kind of flop and FDD does it have?). I'm pouring out
it's a miracle without work. Or are we talking about some kind of self-propelled gun?
Hello GNTB
There is a Pentagon 128 with AY with a floppy drive. Tower case, homemade, with built-in
power supply. 2 years ago I was a worker. Selling in Moscow inexpensively at good prices
hands. Suggestions to the address: music-car@mail.ru
Hello, kgbplus
kgb> Well, mine is heating up for some reason
My spec also warmed up, but it worked... sometimes for seven or eight hours. True
After about six years, the microcircuit responsible for the blue output burned out. After
that's why all the colors got mixed up... Then the keys melted. first 5,6,t,y,g,h,b,n,
then also 4,7,r,u,f,j,v,m. I took it apart, and there were some films with tracks
inside... but who knows how to do it
Hello Savage
At 48, ULA was warming up like a child. In addition, the internal stabilizer was almost
without radiator. This was already done humanely in 128th.
I remember the first soap dishes that were brought were shaking terribly, they were packed in
cellophane, where they soon died of suffocation.