Selling a Soviet dot matrix printer...

Hello All! Printer for Spectrum. Subject Dot matrix, 9 pins, A4, can print on a roll. Soviet, written UPZ. Built-in power supply, 220V. Dimensions 35*45*11 cm. Complete set of all extras. equipment. I installed the Centronics interface on it, and in WindowsME it works great as a text printer (ready config for I'll give you the drivers). Since the interface is standard - it You can put it on some Spectrum or BC. It has some graphics modes, but like the LX-100 and FX-100 it selects a very large scale, and therefore In general, it’s practically impossible to print. Probably you need to select it in general if not Epson... The tape is in the cassette, the cassette is disassembled, apparently the tape can be buy and install separately. The width is exactly half an inch. which Now I have it - it is very tattered and prints dimly. The encodings in the ROM are alternative (do not match with 866 only f2-fc codes), GOST, GOST with pseudographics, and more some with Russian letters instead of English ones. Encoding by default selected by switch, but probably It is possible programmatically. By default it prints 10cpi. Switch You can enable AutoLF. There is no automatic feed, and it’s not particularly convenient to put paper in there refilled, it is actually optimized for the roll. Change the prices... Best regards, Evgeniy.