ZX->VGA converter.

ZXNet echo conference «hardware.zx»

From Evgeny Muchkin To All 24 October 2006

Hello Sonic Both YES. :) CHRV, should we hope for anything or not? :(

From Chunin Roman To All 24 October 2006

Hello, Evgeny Muchkin Evg> Both YES. :) Evg> CHRV, should we hope for anything or not? :( Worth: there are still a few ATM boards left (6 pieces) - after which they will be removed from production, and I will finish off my long-term construction projects.

From Evgeny Muchkin To All 24 October 2006

Hello, CHRV Ess! I'm the first in line to buy! :D

From Andrey Lysenko To All 28 October 2006

Hello, Evgeny Muchkin No, I’ve been standing for 1.5 years already, I hope that 5 years won’t pass...... ;)

From acidrain To All 28 October 2006

Hello fyrex fyr> No, I’ve been standing for 1.5 years already, I hope that 5 years won’t pass, like...... fyr> Is it possible to get in behind you, Fyrex? I think this is a thing for Amiga too came in handy ;)

From Alexander Yudin To All 29 October 2006

Hello, Evgeny Muchkin Evg> In short, I’ll be right behind CHRV, the rest as you wish :D OK. So the situation is like this: I, CHRV,...... :D

From Alexander Yudin To All 29 October 2006

Hello, acidrain aci> Can we get in behind you, Fyrex? I think this is the same thing for Amiga aci> came in handy ;) Actually, I'm first in line! :D

From Evgeny Muchkin To All 29 October 2006

Hello Costa In short, I’ll be right behind CHRV, the rest as you wish :D

From Grigory Alekseevich Sinitsky To All 2 January 2007

Hello, Evgeny Muchkin Yeah, what's the process like? And questions: How does it connect? R-B-G and Synchro Spectrum are entered into the board, stored there in a buffer and output to a VGA connector? Or the board is stuck into the ZX-BUS slot and the Spectrum requires processing with “dumb hot” subject"? (The last option looks undesirable to me, I like Spectrum working system and not a skein of MGTF, forever glitching at the behest of the “Great” Baga"...)

From Maxim Anatolyevich Timonin To All 2 January 2007

Hello, falanger fal> How is it connected? fal> R-B-G and Synchro Spectrum are entered into the board, there they are stored in a buffer and fal> is output to the VGA connector? Something like that...

From Evgeny Muchkin To All 4 January 2007

Hello, Maksagor This means that when only a prototype exists, it is not very interesting :( I wish they could put it into series as soon as possible... :)

From Roman Chunin To All 7 January 2007

Hello, Evgeny Muchkin Evg> This means that when only a prototype exists, it’s not very good Evg> interesting :( I wish they could put it into series as soon as possible... :) The series will be visible only for ATM and apparently Scorpios, and accordingly modified. Since the device is critical to deployment.

From Alexey Zhabin To All 7 January 2007

Hello, CHRV CHR> The SERIES will be visible only for ATM and apparently Scorpios, and CHR> modified accordingly. Since the device is critical to deployment. But what will I have to do for the Pintagon firmware for 312 stock???

From Konstantin Zhukov To All 7 January 2007

Hello, CHRV I'm very concerned about the communication interface with the VGA monitor. As I understand it, The converter will only have a 15-pin analog output. But now that's it The digital interface DVI is becoming more widespread. On some new ones monitors only have this input. Won't we end up in the air, like with ATA interface for hard drives???

From Dolbnin Dmitry To All 8 January 2007

Hello KingOfEvil Kin> And what will I have to do for the Pintagon firmware for 312 stock??? Alas, the bourgeoisie never thought about the Pentagon :(

From Alexander Zan To All 8 January 2007

Hello, Sentenced You can, in principle, make it so that there are 312 lines of onli in the turbo bench press. And in normal mode, skip the bottom lines in the turbo (as previously suggested).

From Pavel A. Ivanov To All 9 January 2007

Hello, Jukov Juk> I am very concerned about the issue of the communication interface with the VGA monitor. How Juk> I understand that the converter will only have a 15-pin analog Juk> exit. But now digital is becoming more and more widespread. Juk> DVI interface. Some new monitors only have this input. Juk> Will we end up in overdrive, like with the ATA interface for hard drives??? I think that this will not be a problem. Over time we will switch to DVI, just like that the same as the transition to VGA is now underway. I think we’ll get to SATA too.