Vintage SINCLAIR ZX Spectrum + 3 128K
ZXNet echo conference «hardware.zx»
Hello Zerios
What do you think about this device http://baze.au.com/divide/?
I came across it on the Internet...
Hello Zerios
Zer> What do you think about this device http://baze.au.com/divide/ ?
A well made device with good software support.
But since it has nothing in common with TRDOS, it did not arouse any interest :)
Zer> I came across it on the Internet...
It has already been discussed on the forum. Use the search.
Hello Zerios
Zer> What do you think about this device http://baze.au.com/divide/ ?
Zer> I came across it on the Internet...
Same as about GIDE. Sooner or later you will also come across it in the open spaces... Don’t bother with it,
because they use GAL :)
Regarding the problem: look at the attached file, IMHO it’s the same thing.
Got it on this forum. I'll delete it in a week (if I don't forget :D)
2All; A; Where did Conan go?
File: BDisk.rar http://zx.pk.ru/attachment.php?attachmentid=3159
Hello Zerios
Zer> Regarding TR-Dos, I have this question, well, let’s assume
Zer> I made an adapter from the system connector to the BDI (I made it somewhere
Zer> percent by 95.. ), in fact +3 that the thread still needs to be changed (in
Zer> firmware) ?
Zer> How do I access BDI?
Like regular 128K. Place the autostart jumper (if there is one) on the BDI
to the "128K" position. In theory, nothing needs to be done in +3 itself.
Hello caro
I made a board to connect the hard drive, flashed the ROMs... and the computer is still in
way... it's a shame.....
Regarding TR-Dos, I have this question, well, suppose I did it
adapter from the system connector to the BDI (it was about 95 percent...), to
+3 that the thread still needs to be changed (in the firmware)?
How do I contact BDI?
Hello Zerios
Zer> I did everything through www.pregrad.net
Has everything arrived? don't they throw?
Hello Orionsoft
As soon as they give it to you, I’ll post with photos -) while on the way -(((
Of course, their price tag is high... but I couldn’t find an alternative.
Hello Zerios
I HAVE ARRIVED!!!!
I'll post pictures in the evening -)))))))
Hello Zerios
And here are the photos, it loads from a PDA, but doesn’t want to load from floppy disks..
.. and also .. while Speck is connected to the TV. heavily distorted music
TV .. this is probably normal, but from the “exit”? TAPE/SOUND to the center - mono, but
Is the quality normal?
File: P1010021.jpg http://zx.pk.ru/attachment.php?attachmentid=3232
File: P1010022.jpg http://zx.pk.ru/attachment.php?attachmentid=3233
File: P1010023.jpg http://zx.pk.ru/attachment.php?attachmentid=3234
Hello Zerios
I connected the PiSyukov disk drive to +3, it’s my second one, it’s a shame to remove my own one,
especially the sea of disks. (by the way, it started working after replacing the bezel with
suitable elastic band...:v2_yahoo; ).;
Now the question is how to write software on them (on PS floppy disks), the problem is
that I tried to format them in 22Disk, but somehow it was not successful, I mean
They don't work on spec.
Who uses what?
Hello, Zerios
Hello Zerios
Zer> .... doctor and why everyone ignores me ..... :frown;
Next!; :v2_laugh;
See; few users +3 here. By the way, the apiary you wrote about is one
from sore spots +3. Like the keyboard film for the ZX Spectrum+ - you need to stock up
twenty years ahead.
Hello icebear
Well, there are no problems with the belt, because any elastic band is approximately
Suitable size - normal replacement.
And with the keyboard... I have a spare... just in case.
Hello Zerios
Zer> Maybe someone can tell me what better, or tell me where to buy?
How about opening up the isash slot?
Hello fan
fan> And how about destroying the slot?
Of course, you can use ISA, but I wanted to buy new ones.
So far I haven’t found anything helpful, I’ll probably dig into the ISA.
Because I really want to try how +3 works with hard drive, and the adapter
I'm almost ready for BDI, I'll try it too -))
Hello, sma77
there is an intermediary site pregrad.net
Hello Zerios
Zerios greetings from SMA77!
Tell me how you ordered the branded ZX-Spectrum+3?
How did you pay? and who delivered?
:v2_conf3:
Hello, goodboy
Sorry for the offtopic, but what percentage (and minimum amount) is being stolen?
pregrad.net??? (I couldn’t find it on the site %( )
A miracle called www.biddingexpert.com grabs -
From the USA - Payment is 9% of the total cost of your purchase. Minimum
Our commission amount is $15. Maximum - 300 dollars.
From GERMANY - Payment is 9% of the total cost of your purchase.
The minimum amount of our commission is 15 euros ( :( ). The maximum is 150 euros.
You can say for nothing ;)
Hello fan
fan> From GERMANY - Payment is 9% of the total cost of your purchase.
fan> The minimum amount of our commission is 15 euros ( :( ). The maximum is 150
fan> euro.
fan>
fan> You can say for nothing ;)
Formers are stsukas, they have no advice at all :v2_mad; :v2_mad:; :v2_mad:
Hello, sma77
sma> Zerios hello from SMA77!
sma> Tell me how you ordered the branded ZX-Spectrum+3?
sma> How did you pay? and who delivered?
sma> :v2_conf3;
I; ordered through www.pregrad.net
Spec was purchased for 50 USD and delivered to the apartment from the UK via
Germany for 50 USD....
It’s a bit expensive, of course.. but I don’t see any other way out, and this office has already been checked
.. I carry a lot of things through them.
When I have time I’ll post a list of everything I have for the Speccy 128 +3 .. and
there are already a LOT of things...
Well, I REALLY love ORIGINAL things.
Hello Zerios
I finally arrived from Ebay with a light blaster and curran speech module, I remember
I promised someone something about the blaster... but I don’t remember what exactly
The Interface III (Multiinterface III) module also arrived, and now it’s not at all
The problem is tapa and tzx writing to floppy disks (to native floppy disks). If anyone from
holders of +3, something needs to be rewritten or something else, how can I help -
Welcome! -)) :v2_cheer:
Hello Zerios
Come on slides, slides!!!
Hello Orionsoft
What to give???