Sprinter or monitor?

ZXNet echo conference «hardware.zx»

From Vyacheslav Kalinin To All 3 February 2007

Hello, All I connect Sprinter 97 to the Electronics monitor and observe very strong interference in the form of diagonal stripes (similar to the contents of the ekaran) the height of this interference about 1 cm, there are several of them at a vertical distance of about 5 cm and they slowly crawling from top to bottom on top of the main image. I connect it to another Siemens monitor and the above-described interference is almost unnoticeable, but vertical stripes appeared, in Sprinter 1/2 mode they are located at 1 familiar places from each other, in Spectrum mode they are noticeable only with very low brightness of the monitor (and already after 4 familiar places). In addition to all this, the image is cropped on both monitors, especially noticeably below. Actually, the information from Sprinter 2000 owners is interested in whether they have such Bugs or are these glitches specifically of the Sprinter 97? (or even a specific instance)

From Roman Chunin To All 3 February 2007

Hello new art new> Actually, the information of Sprinter 2000 owners is interested in whether they have new> are they such bugs or are these glitches specifically of the Sprinter 97? (or even new> specific instance) Sprinter2000 and Yamaha KUVT monitor - no interference is observed.