Several problems with Scorp256 Turbo+ and GRM — ZXNet «hardware.zx»

From Alexey Korotkov To All 7 March 2006

Hello, All Hello everyone. I read the forum a long time ago - almost as soon as it appeared, but I decided to write just now, at the Flea Market, I came across some hardware, which I immediately took Several problems arose. 1) I took the Scorp256 Turbo+ (smuc, modem, hard) “yellow” - if necessary I can scan the diagrams and documentation as they attached it to me.... also take a photo Anything - the device is not alive yet, I will reanimate it. Problems with the power supply and keyboard. (Perhaps someone had, would not refuse help in resuscitation of this device) 2) I also took the GRM (Pentagon 128 clone), but there is one problem with it, itself The machine is in working order, but again there is a problem with the keyboard, someone re-soldered and apparently got the ends mixed up (when you press, for example, button (5) - the letter (p) appears..) - please, if anyone has any information on GRM, please share, I would really like the diagram.

From Alexey Korotkov To All 7 March 2006

Hello Conan Con> The diagram and description of the GRM are available, please indicate the email address where Con> send them. Thanks for the quick response. Sorry for getting into the wrong forum thread with my problem. If it’s not too difficult, please provide a diagram for the mototeam (dog) soap.nm.ru Photos, diagrams of Scorpiona and SMUC + description - do you need it? By the way, I had and, in principle, have a living clone of the Pentagon 128 - it was produced cooperative .. I don’t remember the name .. there was a TOKK (Tokk Computer) label on the case System), in principle, I know who produced it and how to find these people if interesting, I'll try it.

From Konstantin Sviridov To All 7 March 2006

Hello Zerios Zer> please, if anyone has any information on GRM, please share Zer> please, I would really like the diagram. The diagram and description of the GRM are available, please indicate in a personal email the email address where they are send.

From Konstantin Sviridov To All 8 March 2006

Hello Zerios Zer> If it's not too difficult, please use the diagram for mototeam soap (dog).nm.ru The diagram (and installation) was sent by email. Zer> Photos, Scorpiona and SMUC diagrams + description - needed? The description of SMUK may be useful (there is already one option), and especially maybe testing of this controller is required (Spensor ["http://zx.pk.ru/member.php?u=199"] some time ago I really asked owners to respond ["http://zx.pk.ru/showthread.php?t=1360&page=1&pp=10&highlight=smuc"] ).

From Alexey Korotkov To All 9 March 2006

Hello Conan The description of SMUK may be useful (there is already one option), and especially maybe testing of this controller is required (Spensor ["http://zx.pk.ru/member.php?u=199"] some time ago I really asked owners to respond ["http://zx.pk.ru/showthread.php?t=1360&page=1&pp=10&highlight=smuc"] ).[/QUOTE] Thank you. I have SMUC v.1.2 Instructions for connection and operation. I'll scan it over the weekend. Where to post it? Testing will be a bit difficult for now... my Scorp has never been alive yet-))

From Aleksey Naboka To All 9 March 2006

Hello Zerios Zer> someone re-soldered and apparently got the ends mixed up (when clicking, for example Zer> buttons (5) - the letter (p) appears..) - please, if anyone has any Zer> info thread on GRM, please share, I would really like the diagram. Everything is easy there, I myself have done everything at random so many times, that’s the most important thing find a mikruha to which D0-D7 and separately ICs with addresses come everything from the keyboard panel. And then connect them to each other and see what the button worked.

From Alexey Korotkov To All 9 March 2006

Hello, hardy Thank you Tax. GRM is relatively clear... I'll figure it out. Now Scorpion. Of course, I don’t know what the old owner tried to make out of it... what a spaceship li... but.. Please help me identify what is what. Scorpin board - identified SMUC - identified. .. but longer .. on the small board it says Robert (looks like a modem) but the big one??? Maybe someone knows what? File: 04.jpg http://zx.pk.ru/attachment.php?attachmentid=2800 File: 03.jpg http://zx.pk.ru/attachment.php?attachmentid=2799 File: 02.jpg http://zx.pk.ru/attachment.php?attachmentid=2798 File: 01.jpg http://zx.pk.ru/attachment.php?attachmentid=2797

From Igor Afonkin To All 9 March 2006

Hello Zerios The large board very vaguely resembles a knee-mounted programmer... More it is almost impossible to say for sure, since the marking of parts is practically not is being viewed.

From Alexey Korotkov To All 9 March 2006

Hello jdigreze I can take a photo with a different resolution... and why does the end stick out of it into the body line? .. and the modem is attached to it?

From Igor Afonkin To All 9 March 2006

Hello Zerios Make sure the markings are visible. And a big board and a small one... Strange design, I haven’t seen it myself, but I think it will be possible at least approximately decide...

From Konstantin Sviridov To All 10 March 2006

Hello Zerios ZX Scorpion (yellow) diagram published on the forum ["http://zx.pk.ru/showpost.php?p=10413&postcount=2"]. If you need it exactly email, let me know.

From Alexey Korotkov To All 10 March 2006

Hello jdigreze I haven't taken a photo yet - in the evening. Dear, to resuscitate Scorpion you need a diagram, it turns out I have it no. scorp - yellowish. Please share. mototeam(dog)nm.ru

From goodboy To All 10 March 2006

Hello Zerios Zer> on the small board it says Robert (looks like a modem) This is the modem - CDOS, I have it lying around somewhere.

From Alexey Korotkov To All 13 March 2006

Hello Conan Con> ZX Scorpion (yellow) diagram published on the forum Con> ["http://zx.pk.ru/showpost.php?p=10413&postcount=2"]. If necessary Con> by email, let me know. Thanks, I already printed it. And another question... ... is there no board template? Needed for GRM and for Scorpiona...

From Bogdan Pankevich To All 13 March 2006

Hello, goodboy goo> this is the modem - CDOS, I have it lying around somewhere. goo> this is the modem - CDOS, I have it lying around somewhere. Can I see the modem diagram?

From Alexey Korotkov To All 14 March 2006

Hello pbogdan 1) Photos of unknown boards .. pulled out from Scorpa It’s clear that Robert exists, thank you, but here’s a diagram. But what for two more fees is not at all clear .. like in a fairy tale, the further .. the more .... ______________________________________________________________ 2) I still couldn’t solve the issue with connecting GRM to the keyboard, if anyone knows, please sketch out the wiring or at least roughly describe it. Photo of the keyboard below (58 standard keyboard). At the first start, the buttons got confused (described above), so I tried the hardy method - the result is that everything stopped working... __________________________________________________________ It’s not a day today, but one complete failure of some sort .. :mad: 3) Has anyone encountered this: on ATM Turbo from nedopc, TR-DOS stopped starting, neither 128 nor 48... just says 1982 Sinclair Res.... where to look for a rake?? P.S Damn hysteria is about to start :v2_scare: File: klav.jpg http://zx.pk.ru/attachment.php?attachmentid=2862 File: unknow2.jpg http://zx.pk.ru/attachment.php?attachmentid=2864 File: Robert.jpg http://zx.pk.ru/attachment.php?attachmentid=2863 File: unknow1.jpg http://zx.pk.ru/attachment.php?attachmentid=2865

From Dobrynin Sergey To All 14 March 2006

Hello Zerios Zer> 3) Maybe someone came across - on ATM Turbo from nedopc, stopped Zer> run TR-DOS, neither 128 nor 48... just writes 1982 Sinclair Zer> Res.... Zer> where to look for a rake?? Zer> Zer> P.S The hysterics are about to start Have you tried to see what is happening on the signals R0, EP1, EP2? they come from D75 (155ru2) and D10 (KP11)...

From Konstantin Sviridov To All 14 March 2006

Hello Zerios Zer> And another question... ... is there no board template? Zer> Needed for GRM and for Scorpiona ... I don't have one. Ask fan-a ["http://zx.pk.ru/member.php?u=165"], he worked on restoring templates.

From Alexey Korotkov To All 14 March 2006

Hello Conan Thanks - I'll inquire. Dear friends, I have one more stupid question, forgive the “beginner” -) Together with Scorpion I was given a cunning adapter, a scarf on one side to it connect the cable and power for the 5.25 drive, on the other side the drive 3.25 .... (just an adapter) But if you connect it to GRM, will it work? (Currently GRM is 5.25)

From Vlad Semchenko To All 14 March 2006

Hello Zerios Zer> And another question... ... is there no board template? Sorry for the stupid question - why do you need a photo mask, maybe you need a wiring diagram needed?

From Vlad Semchenko To All 14 March 2006

Hello Zerios Zer> Assembly .. will probably do -) (I probably didn’t express myself correctly) Zer> Actually, you need to understand what to connect where... So this is for Konstantin, he is the Chief Guardian of the schemes! In general, there seems to be something like this on the forum, use the search!

From Alexander Zan To All 14 March 2006

Hello Zerios Well, no, everything that exists, at least in some form, is no longer on the site. If comrade Zerios doesn’t find it difficult to scan the scarf (I’ll give you an account for uploads to the site/ftp), then photo templates may appear relatively soon. In general, write in a personal message or email http://sblive.narod.ru/mail.gif

From Alexander Zan To All 14 March 2006

Hello Zerios I sent you a PM where to fill it up.

From Alexey Korotkov To All 14 March 2006

Hello fan I won’t consider it a labor-))) I'll scan it this evening. Where to upload, in what resolution and in what volume? I’ll scan the scarf on both sides.. how it turns out will be the same - or I’ll take a photo.

From Alexey Korotkov To All 14 March 2006

Hello spensor Assembly .. will probably do -) (I probably didn’t express myself correctly) Actually, you need to understand what to connect where... Well, I'm a sucker for now... I'm still learning -)