scorp and 3 disk drives...

Hello Konstantin! 29 Dec 02 17:25, Konstantin Lebedev -> All: KL> Here I want to launch a scorpion and make a disk C. How is this possible? 1) Programmatically. RAM disk ;-) 2) Hardware, install a decoder. I set 155ID4 - nothing, it works. For the yolk: Connect D65 input 3 to D1 (Z80, leg 15) - if not already connected. D68, tear off legs 3 and 11 from the board. We put 155ID4 (8 for general, 16 for +5) Leg 3 is launched onto the 5th D65. Leg 13 on 2nd D65. Leg 2 for general. Leg 1 to 3rd leg D69 or 2nd or 13th D68 Leg 7 is launched on DS0 - the 10th pin of the flop connector or where the 3rd leg D68 went. Leg 6 is launched on DS1 - the 12th pin of the flop connector or where the 11th leg of D68 went. Leg 5 is launched on DS2 - the 14th pin of the flop connector. Everything seems to be working. In principle, it can be done on almost any 155ID?? Alexand