Ry!

Hello, WingLion I'm 1st in line for the assembled and configured one. :v2_yahoo; By; due to the fact that I provided this opportunity by obtaining the W24512AK-15 necessary for this. Yes, and agreed first. :v2_rolley

Hello Vitron Report on the receipt of Pentagon-1024SL ver 2.2 The board is well made. Only soldering m/sx memory on a 30 pin SIM looks like “makeshift”, as if soldered by hand. :o The Nemov IDE controller looks good and fits the slot. There is a 34-pin “cut in half” cable from the drive that is used for board connections. The board's power supply is in AT format, no questions asked. I was surprised that the ordered cable for the 3.5-5.25 drive about which was not found mentioned separately in the order. :| The ROM from the board was read by the programmer and, for fun, looked through f3 in Commander, Sinclair's mark and error message texts found BASIC-48. :) After connecting the board, the reporting will continue. :v2_tong2: