ray current

Press RESET immediately, All! How to correctly/competently adjust the current of the rays in the monitor? This the so-called "G2" kinescope output. Well there TDKS (flyback transformer in bourgeois style) with twisted regulators. I set it by eye, according to brightness, somehow it doesn't look very good... How harmful can a higher current than it should be for a CRT? How critical this is, the brightness of the glow is set to “G1” electrode (modulator in Russian, it is with it that the brightness is adjusted, from the processor) or to "G2"?

KF> How to correctly/competently adjust the beam current in the monitor? This KF> so-called "G2" kinescope output. Well there TDKS (flyback transformer KF> in bourgeois style) with twisted regulators. By eye, by brightness And not the filament current? It’s better not to play with this, although there were runs on the radio, according to about the incomplete use of the electrode area. Better with the help of a device shoot once, and in general the TDKS is an expensive and scarce thing. KIA