Question about ROM — ZXNet «hardware.zx»

From Alexander Zan To All 19 December 2005

Hello Orionsoft Elt> I forgot to ask Elt> there are 32 contacts on the mother, and the ROM has 28, study datasheets and Elt> logic dictates that the chip should be installed in two increments Elt> contact from the top border of the socket (on which the key is), am I right? Well, sort of, yes, you just have to screw the power supply pin where it should be. B In any case, we check the datasheets of what sticks out in the board and what to be flashed.

From Orionsoft To All 19 December 2005

Hello Eltaron Elt> indented by two contacts Absolutely right, the foot of the earth is ALWAYS in its position sbl> then you can use a 32pin UV erase chip with a window. For sbl> this will need to knock out the window and get rid of the wire sbl> connections connecting the crystal to the legs. Solder the cable with sbl> outer side of the legs . Damn, that's exactly what I did :eek:

From Nikita Alexandrovich To All 19 December 2005

Hello Orionsoft what uniflash keys did I use to make it work with PCI? please provide pcirom keys

From Alexandr Tsidaev To All 20 December 2005

Hello,geners gen> what uniflash keys did I use to make it work with pci gen> please provide pcirom keys so there is PCIROM and that’s it, at startup, uniflash itself will ask which pci device to use can also be specified in the form -PCIROM 0 1 0, explicitly indicating the device position, but It doesn’t work for me, it still asks what exactly to use PS I have S3 Virge DX

From Nikita Alexandrovich To All 20 December 2005

Hello Eltaron Why did you comrade suffer, I don’t understand, you can read firmware up to 32kb from a network drive: p

From Alexandr Tsidaev To All 20 December 2005

Hello,geners gen> why did you suffer, I don’t understand, it’s possible to install firmware up to 32kb from a network drive gen> read :p networking is too easy :-) and the ROM of the 128th Specky is more than 32 kilos

From Alexandr Tsidaev To All 20 December 2005

Hello,geners gen> why did you suffer, I don’t understand, it’s possible to install firmware up to 32kb from a network drive gen> read :p networking is too easy :-) and ROM 128kb speckies is more than 32 kilos

From Nikita Alexandrovich To All 20 December 2005

Hello Eltaron wow, my Penta worked without a hitch, it works in emulators and disk games plays and doesn't need anything else Moreover, cofc came across a buggy network device, I’ll try its main ROM for the subject deprivation of network procedures and replacing them with a software address decoder for 512 mikrukh