Programmer for Alter
ZXNet echo conference «hardware.zx»
Hello, CHRV
CHR> ByteBlasterMV
MAX7000 without letters is sewn only by the master blaster programmer, and does not support
ISP programming.
Hello, All
Hello everyone.
Due to inexperience I bought mine here Altera - EPM7064LC44-15
After advice from friends, I found out that it can only be programmed by some cunning
programmer.
That is, in order to flash with a simple ByteBlaster, you had to take not this one, but also with
with the letter S in the title, that is
EPM7064SLC44-15
Hence the question - has anyone come across this same programmer on the network?
As it turned out, an analogue of this chip is in my SMUK, only not 64, but 32.
Help me! :v2_tong;
I; Of course I’ll buy what I need, but the truth is more expensive... :v2_wink2:
Hello, Mikka_A
Mik> Of course I will buy what I need, but the truth is more expensive... :v2_wink2;
ByteBlasterMV;
Hello, Mikka_A
7064 without S can only be sewn with a special Alter programmer.
It costs much more than a new chip with S, so it makes sense to buy it
no. If a single specific firmware was required, it would be possible
try to find this programmer from someone, for example, in a store that sells them
company and try to sew it up. The Gamma company (St. Petersburg) once offered such
service, but I have no idea where this Gamma is now. Was once in that building
the Research Institute of Television itself, where I now work, but now Gamma is not there.
Hello, WingLion
Win> 7064 without S is sewn only with a special Alter programmer.
Win> It costs much more than a new chip with S, so buy
Win> it makes no sense. If a single specific firmware was required,
Win> you could try to find this programmer from someone
Win> for example in the company that sells them and try to sew them up. Gamma Company
Win> (St. Petersburg) once offered such a service, but where is this Gamma now
Win> - I have no idea. I was once in the building of that same research institute
Win> television, where I work now, but now Gamma is not there.
www.icgamma.ru they live at Professor Popov 23.
I will go to them to buy SLC on Wednesday, because I realized that “If you hurry, people
you'll make me laugh..."
PS. A little offtopic. What alters are there in the sprinter? I'll just ask how much
them. They are also officials for Alters.
Hello, Mikka_A
Mik> PS. A little offtopic. What alters are there in the sprinter? just asking price
Mik> how much they have. They are also officials for Alters.
EP1K30QC208-3
and EPM7064STC100-10
Hello, Mikka_A
Mik> Is there a schematic for this programmer on the Internet?
I have repeatedly written that there is no, and there is no programming algorithm. A
the programmer cost about $500
Hello, WingLion
Win> 7064 without S is sewn only with a special Alter programmer.
Win> ..........
Is there a schematic for this programmer online?
Let’s just say, if there isn’t something super duper there, and there aren’t 200 buildings, then why not
do.
I think that in St. Petersburg, say, it would be nice to have one such programmer
would...
Hello andrews
and> documentation for MAX7000 made a mistake
There is no mistake in the documentation, it says in black and white that JTAG exists
only in MAX7000 with letters, and MAX7000 without letters is programmed in the same way as
classic devices via programmer. (see post below)
Hello andrews
We all read together the first paragraph at this link:
http://www.altera.com/support/devices/programming/max7k/prg-max7k.html
P.S. I think the topic is closed
Hello, Mikka_A
It looks like the MAX7000 really DO NOT HAVE JTAG, but in the documentation for the MAX7000
there was a mistake in the "excavation", because the link to the bsdl files
MAX7000 is not on the lists...there are only MAX7000A,B,S
http://www.altera.com/support/devices/bsdl/max7k/max7k-index.jsp
Hello deathsoft
Who has MaxPlus, take a look at the corresponding section... I'm certainly not sure
100%, but the EPM7064 has pins for JTAG... but why does it need JTAG then?
And ISP via JTAG is In System Programming, this is a programming possibility
chip _soldered_ into the board and the ability to transfer it from operating mode to mode
programming without turning off the power.
If there is a BSDL file for EPM7064, then it has some JTAG BST commands,
at least the basic ones. And where is the logic of the developers then? There are JTAG pins, but sewing
through others?
Hello andrews
and> Who has MaxPlus, take a look at the appropriate section...of course I do
and> I'm not 100% sure, but the EPM7064 has pins for JTAG... and what for
and> then should he JTAG?
and> And ISP via JTAG is In System Programming, this is possible
and> programming the chip _soldered_ into the board and the possibility of transferring it
and> from operating mode to programming mode without turning off the power.
and> If there is a BSDL file for EPM7064, then there are some JTAG BST commands
and> it is there, at least the basic ones. And where is the logic of the developers then? JTAG
and> there are pins, but sew through others?
I called EFO yesterday.
They talked vaguely, but in essence they did not refute, but also did not confirm about
process.
True, they said that if there is a project (max or quartus) then they
they will sew. They have CAD with a programmer. Seems like it's for free.
Let's see. It’s easier, in my opinion, to make a beautiful keychain.... :v2_tong2; :v2_wink2:;
PS. I ordered it from IC Gamma, I’ll go and pick it up tomorrow.... At the same time I’ll ask about my problem...
ETM3032ALC-44-10 - $1.25
ETM3064ALC-44-10 - $2.4
Zilog Z80 10 MHz - $2.8