Profi

Hello, All Hello everyone! I took out my old pro from the mezzanine and wanted to revive it. Preamble: Pro was bought in 1994 in a certain office (sort of like Tretyakov Gallery - I don’t remember anymore). Previously, he had a color monitor attached to him Electronics VTC32, but it, along with cords and power supplies, is for Speccy and The drive was stolen from the dacha. Along with them, about 200 floppy disks with software, games, music and CP/M. A pro at one time used it at 100 - and Pascaled in CP/M, and played and wrote music in ST. Covox soldered to it... Eeeeh, it was a while! Pro two-board, I don’t remember the memory - like 512k, versions on There are no boards, only the Profi inscription and that’s it. The case is black, like from a BKshki, the keys cursors are not placed separately. Now the actual questions: Where can I get a power supply for it? There used to be something like this - a black square box 15x15 centimeters, the top edge on the front side is beveled. I understand that he gave both 5 and 12V. Accordingly, I am interested in the pinout of the power connector. On the back of the pro there are two connectors 5 and 7 pins with the inscriptions TV and DTV. To one the monitor was connected, but the second one - I don’t remember, maybe it was a joystick... Accordingly, not Can anyone tell me their pinout? If I connect RGB+sync and ground to RCA TV input, I will get a B&W picture without grayscale or normal B&W a picture? Does Covox for pros play only from CP/M or from nature-speccy mode? Kovoxplugs into the interface slot on the top board. I only drove it at one time from CP/M - there was a certain program with a graph interface a la Windows, what kind of program? Twisted stm`ki. There is a 5.25 Teac 720kb disk drive, which at one time was just from this pro. Question, Is it possible to burn floppy disks for pros on a 5.25 1.2mb PC drive? And what a prog it's better to do this. Where can I download DCU? P.S. ZX-VGA was never made?

Hello, spleen Everything can be downloaded here: http://trd.speccy.cz/ in the SYSTEM folder the office selling PROFI was Sokolniki Firm "Alkiris"

Hello, spleen spl> As I understand it, he gave both 5 and 12V. If there are 3 pros, then only 5v is possible. For VG there is a converter there (at least at least for me) 5->12

Hello, spleen Is it possible to power the profik from a regular PC ATX power supply?

Hello, spleen spl> Is it possible to power the profik from a regular PC ATX power supply? It’s possible, but it’s better to find an AT block at the nearest barracks or trash heap! If it free from any coolers, then it will turn out to be quite small.

Hello, CHRV > If he is freed from all coolers What, is it possible?

Hello, CHRV CHR> Message from spleen CHR> Is it possible to power the profik from a regular PC ATX power supply? CHR> CHR> You can, but it’s better to find an AT block at the nearest brahol or trash heap! What's the difference? Why is AT better?

Hello, kgbplus kgb> What's the difference? Why is AT better? It's better because it's less powerful :)

Hello, kgbplus kgb> What's the difference? Why is AT better? And the shutdown is simple, compared to ATX.

Hello RSV RSV> And shutdown is simple, compared to ATX. A switch and two wires to the front panel and nothing complicated. If the unit is inside the case, the wire to the switch can be laid thin and not pull the four-wire wire through the entire body (and there will be less interference from it).

Hello, spleen spl> Is it possible to burn floppy disks for pros on a 5.25 1.2mb PC drive? It’s better to insert 720 and write on it.