PCAD 2001 schematics, boards, libraries
ZXNet echo conference «hardware.zx»
Hello, All
I started learning PCAD 2001 and for the final result I chose zx to get
finished product. If anyone has any libraries for sim, z80, ay,
connectors ide, isa, vga 15 pin, midi, etc. throw here. And then besides the fee
Pentagon and ide board did not find anything
Hello, dim
Well, really, no one has anything?
Hello Mick
libraries on the pcad website but there is no sim for 30 pin, and vga 15 pin. I know that
I can draw it, I can’t find it, I’ll draw it like that, I’d just like to see the results
ready-made circuits, boards, that is, look at examples
Hello, dim
dim> libraries on the pcad website but there is no sim for 30 pins, and vga 15 pins.
dim> I know what I can draw, I can’t find it, I’ll draw it like that, I just want to
dim> see the results of finished circuits, boards, that is, look at examples
What is on the website does not always meet the standards, especially ours for conditional
designation and many elements it does not contain, especially the type of sim - you can
draw it as one memory chip, and make the pattern a connector to the board.
Most likely you will have to do it yourself, since there are few iron workers here,
and the presence of a Sim is either even less or not at all.
Hello, dim
dim> well, really, no one has anything
You yourself decided to study PCAD. If there is a datasheet for an element, then draw it
it's 10 minutes. Moreover, it will turn out faster than someone sharing it. Now
element libraries are also so-called intellectual property and
They usually want money for it. So it’s easier and faster to do it yourself.
Hello Mick
imho? everything except simm and AY is in the standard libraries (which are old)