Need a DALLAS CMOS circuit according to Gluck
ZXNet echo conference «hardware.zx»
Hello, All
I found out that I have DALLAS attached to my Scorpio according to the scheme from ZX-News35. But, to
Unfortunately, this standard is not a standard at all, because is not supported by anyone and
nothing.
I decided to remake the clock connection using Mr Gluk's circuit...
But I can’t find it anywhere even if you try.
Please provide a diagram. Or just tell me which press to look for it in...
Thanks in advance.
Hello spensor
I reviewed all 7 issues - there is no diagram anywhere :(
Hello, Evgeny Muchkin
Evg> I decided to convert the clock connection to the Mr Gluk circuit...
Evg> But I can’t find it anywhere even if you crack it.
Look in the magazine "Black Crown" somewhere in N3-4. There was
several options, with detailed recommendations.
Hello, Evgeny Muchkin
like this... but attachments on the forum don’t work...
Hello, The Exploited
The> like this... but attachments on the forum don’t work...
Thank you so much!!! Is it possible to reduce the number of buildings in the diagram?
:v2_rolley
PS; Intensification; I just don’t feel like making sandwiches... :(
PPS; U; me DALLAS 12887
Hello, The Exploited
I have Scorpion. As far as I remember, there is a #FF port. It turns out that it is necessary
Completely fence the scheme? :(
Hello, Evgeny Muchkin
It’s better to cut it off, and put id7 and le1 from that circuit - start AS DS.
no need to install tm8
Hello, Evgeny Muchkin
assemble only the chains forming AS and DS. in theory it should work. but if
you have port #FF, then there will be conflicts => you need to either cut off this port or
make the correct formation /iorqge
Hello, Wlodek
I did it according to this scheme:
File: DS12887+ATM2.pdf http://zx.pk.ru/attachment.php?attachmentid=4095