Modem on SMUC

Hello everyone! After I switched the modem (unnamed rocker on 14400) to COM2, Melon started working in terminal mode, I can call anywhere, etc. I already I was delighted. However, I can't start any mailer :( 1. The postal office in Melon blatantly hangs itself with the inscription HanUp, responding only to BREAK by blinking the curb and to RESET. 2. NAM is generally discarded (the config was incorrect). I only have time look at the line before resetting or freezing modem init, and also it The indicators in the lower right corner have time to blink. When I enable auto-dialing in Melon, Melon behaves similarly to point 1. I also changed the port lock in different ways. What should I do? I want a working modem on Spec! I haven't had time to send this letter yet. I decided to use another modem (SAMSUNG 14400 on CirrusLogic) insert. So with this modem Melon started working in mailer mode during In any case, he calls and connects, and NAM still resets. Melon when it connects it writes the connection speed, and then throws all sorts of garbage onto the screen after which it is reset. My file doesn't even try to send. How can I start a mailer? What can be done with the previous modem? Stanislav

Hello, All! It was with great sorrow that I managed to send the mail. To do this I had to make a hole port for 2400, otherwise nothing works :( Another modem for 19200 connects, but when entering the Melon mailer it says HangUp and that’s it. How is it all overcome? Best regards, Stanislav Yudin.

Hello Sergey! 25 Aug 02 23:24, Sergey Cherbynin -> Nikolaj Amosov: [disk error] NA>> And in my opinion NAM is generally ineffective on Scorpio - I checked it on NA>> regular and GMX. SC> How is this not working? I'm working with it on Scorpio NAM v0.23b, that's all SC> plows normally, only there is no exit after a session in TR-DOS, it should be there SC> go somewhere else. And everything works fine on COM1 and SC> COM2 too. I have a yellow scorpion with a screw and a USR 33600 Voice modem. Well, then I don’t know - it resets for me immediately after loading. Maybe I just got it broken... SY>>> What should I do? I want a working modem on Spec! SC> NA>> Go to is-dos - the best solution, besides, you have a screw SC> If only there was a good description of how to configure everything there. SC> I still haven’t figured it out. Well, what’s not clear about it? Register paths and addresses in the config. This is enough if you call manually. If you want automation, then I advise you to read the configs from Xenia-Mailer - by Kondratyev made Dikiy for him. If necessary, I can throw it.NA>> - in general, everything will be quick and convenient. Unless you have to write letters NA>> constantly throw in tr-dos and back. SC> This is where the inconvenience lies. Write yourself a batch file, which will be sent automatically after the session send you a tr-dos email and launch the editor in tr-dos - that’s business for a couple of minutes. Then you can manually copy it back to is-dos and launch the soaper. Nikolaj

Hello, Stanislav! Wednesday August 28, 2002 at 19:58:05, Stanislav Yudin => Kirill Frolov: SY> I have no idea how to send all this as a log, because SY> I don’t know the program that logs on Scorpa, but on PC I have SY> There is no ISA slot... Melon flies next, I converted it to a scorpion about a year and a half ago, but I still haven’t completed what I wanted, although in general I have to work according to At least with the log for sure, I can’t guarantee it will be bug-free. P.S. There is no soaper in it, but in general if you need a soaper, it’s better than a wild one in isdos IMHO there is nothing on Spec. Alexandr.

Hello Valerij! 31 Aug 02 13:44, Valerij Kozhevnikoff -> Nikolaj Amosov: [disk error] NA>>>> - in general, everything will be quick and convenient. Unless you have to write letters NA>>>> constantly throw to tr-dos and back. VK>>> By the way, how do you do it? Not through floppy disks? NA>> I can’t do it anymore, because the modem has been switched into an enemy one NA>> piece of iron. And before I threw everything on the screw, straight into the tr-dos image NA>> disk - it was fast and convenient. VK> What software do you use for this? The to_trdos.com copier and driver #0R+MOA.blk that I patched VK> However, I still don’t have it. Will you let me take a look? In soap. VK> To copy trdos -> isdos I use a homemade emulator driver VK> trdos panel, and isdos -> trdos - only through floppy disks ;( Why not immediately copy the image? Driver #0R+MOA knows how to work with mounted tr-dos disks. By the way, it also works in the other direction, only through a copier from_trd.com. Nikolaj