Megaspectrum problem
ZXNet echo conference «hardware.zx»
Hello, All
I soldered the wires to connect to the megaspectrum (see megaspectrum thread)
normal 80-track drive, a new problem emerged. When trying
launching any program - the machine either freezes, displays OK 0:0, or invalid
argument. What are your thoughts?
Hello, spleen
spl> the machine either hangs, or displays OK 0:0, or an invalid argument.
just like an emulator =)
and the head fidgets around the disk, positioning itself?
Hello Orionsoft
Ori> I had this happen on Pentagon 128 when 12 volts on VG93 was bad
Or maybe this could happen if your daughter is connected to a music processor, but
no music processor? In Megaspectrum, the board for AY is external, purchased separately
and soldered to the system connector.
Hello, spleen
I tried to remove/insert back the mikruhi - memory/ROM. That effect
same. Sometimes the error Nonsense in basic and the line number beyond 7000 also appear.
What else could it be?
By the way, the question is, is the base ROM on all 128kb clones the same? For example from
Is it possible to put the Pentagon in Moscow?
Hello, spleen
I had this happen on Pentagon 128 when 12 volts on VG93 was bad
Hello, spleen
spl> Or maybe this could happen if the daughter is connected to the music processor, but the
spl> no music processor?
Hardly