Iron production
ZXNet echo conference «hardware.zx»
Hello, CHRV
CHR> Yes, one more thing, I bought them in factory packaging with quality control department and
CHR> beautiful 5 on the package...
CHR> And those that went to retail were probably just rejected and did not pass
CHR> military acceptance, that’s why they had such quality.
and yet, as I expected, the bugs come out, they come out :(
Hello, POIND
and why don’t you want to configure the card for 4-bit with combined DI/DO os?
don't have them?
they work so nicely in my old Pentagon 48
but in ATMK there is no RAM, and the truth is probably scary because of the panels
but the panels spit them out due to the temperature, but with other osushkas everything would be fine
it was much colder :-)
Hello, CHRV
Roman, don't bother with these panels. I just wanted to get an opinion
professional, I recognized him and understood why I had such glitches.
In my opinion, if someone wants to assemble ATM, as it seems right to him,
can order a board or a constructor from you and do whatever he wants with it. I am so
in fact, I did, but the truth is from other prerequisites, I really like it,
how a piece of hardware assembled with your own hands comes to life, and hands on a soldering iron
missed you. Really, respect to you, once again, for the work you have done.
Hello, CHRV
CHR> I’ll repeat it again.
CHR> If you install collet panels, you yourself will then shout “what’s wrong
CHR> expensive." Collets can be installed for an additional fee, or free of charge
CHR> solder Ozu to death onto the board (but for example, if you burn it
What, Roman? Let's calculate how much the designer/assembled one will cost
board with collet sockets, and include this price as a new item in
price list!
Hello, Maksagor
> So, Roman. Let's calculate how much it will cost
> designer/assembled board with collet panels, and turn this on
> price as a new item in the price list!
No need Max. Anyone who wants to will ask!
Hello, CHRV
By the way, Roman,
CHR> you can solder RAM to death on the board for free (but for example if you
CHR> you will burn it by mixing up the power polarity - the most common
CHR> the reason why they give me the boards for repair is that the repair will cost
CHR> specifically more expensive).
The “green” board that came to me is of simply amazing quality! All that
soldered in, can be easily dismantled using a syringe needle and no
separated paths...
Hello, do_se
do_> By the way, Roman,
do_>
do_> the “green” board that came to me is of simply amazing quality!
do_> Everything that is soldered can be easily dismantled using a syringe needle
do_> and no disconnected tracks...
What diameter is the needle? Is there a marking on it? I've heard about this method, I need it
will try...
Hello, do_se
the nippers rule
Hello, CHRV
I already wrote about small circuits! =(
and I consider it a perversion to seal large dips
Hello jtn
jtn> oscilloscopes and instruments help.. 200r is IMHO all the small circuits of the spec
jtn> they cost so much, and if there is a bunch of all sorts of junk, then it’s all the more not a pity
Do the math at your leisure :). Well, at least Zilog + YM.
You also need to take out the old items from the old ones. For example, I do this with a hairdryer and
homemade nozzles.
Hello jdigreze
jdi> now I use the so-called “suction”
People, I'm going crazy over you :)
Just a joke, of course :)
I’ll add my humble self: For repairs, I use an ancient but reliable method -
we bite out the legs of the mikruh from above, then using a soldering iron and small pliers
we remove these “rudiments”. Next, we attach a regular needle to the “holes” and with
using a soldering iron we deprive the board of its virginity :) Insert a new microcircuit and
soldering it is a matter of minutes :)
Hello, ewgeny7
ewg> put a regular needle on the “holes” and use a soldering iron to remove
ewg> virginity fee
"Grandfather's" method =) About 14 years ago a guy taught me exactly how to solder
=)
But you can also try with suction ;)
Hello jtn
If there is a conversation about dismantling elements, I will also speak out: I used to use
medical needles, a method not without flaws, but at that time there were no
alternatives. Now I use the so-called “suction”, i.e. desoldering pump.
The quality of dismantling has increased many times over, while the cost of this thing is about
100 rubles. There are more sophisticated options, but this is enough for me. ;)
Ask in radio shops, in our hole there is something for every taste and color, prices too -
inside and out... I use the simplest one, Chinese, there are no complaints about the quality.
Hello, do_se
do_> Roman, but weakly (you can on your website) post the wiring of the adapter
do_> from the AT power supply to the ATM power connector?
YES easily, I’ll do it soon!
Hello, do_se
Gentlemen, only six TurboSound boards have been made, two are already taken, we are ordering
-let's fly in and buy :).
New revision B, taking into account errors and corrections. Thanks to Ronin, LVD,
jTN and special thanks to militar for his sympathy and assistance in production.
Hello, CHRV
CHR> Gentlemen, only six TurboSound boards have been made, two are already occupied,
CHR> order - fly in - buy .
CHR> New revision B, taking into account errors and corrections. Thank you
CHR> Roninу, LVD, jTN and special thanks to militar for his sympathy
CHR> assistance in production.
What kind of TurboSound are we talking about, simple or FM on 2203?
Hello Costa
Cos> Which TurboSound are we talking about, simple or FM on 2203?
The old one is at 2149, the new one is also possible.
Hello, CHRV
CHR> An order has been placed for TurboFM boards (will be available in a month).
CHR> Anyone interested, write to me and order.
CHR>
CHR> TurboSounds can be purchased immediately and now.
The boards are manufactured by TurboFM.
But a glitch was found when working in turbo mode (Thanks to N. Amosov).
Now the problem is being solved by me and LVD, orders will be accepted immediately after
corrections.
To whom do I owe payments, please wait until the glitch is fixed (glitch
can be fixed by changing the firmware).
LVD is also preparing an article on programming the subject.
Hello, CHRV
Can you ask how things are going with the RGB -> VGA encoder... very
I want to attach this subject to an LCD monitor :)
Hello Alex/AT
Ale> Can you ask how things are going with the RGB -> VGA encoder... well
Ale> I really want to attach this subject to an LCD monitor :)
No way, the reason is the same - a chronic lack of free time.
I can’t do everything alone.
Hello, CHRV
CHR> How to work with it I’m not ready yet, everything will be soon, let’s go
CHR> while working on the board (by me) and the editor (Shiru Otaku).
We'll wait! By the way, thanks to Shir Otaku for his suggestion! Let's be with ours
hand try to move Escape to the Spectrum! :)
Hello, CHRV
CHR> By popular demand, the relatives of AY-3-8910 came from China!
Is it possible to make Turbo Sound FM for the developers of "Escape" for the New Year?
Census Group SPb? And maybe suggest a technology to work with this
for emulators...no board yet. By the way, the fee will have to be included somehow in
pussy there is no Turbo 2+ in the form of a laptop yet.
Hello, CHRV
By popular demand, the family of AY-3-8910 came from China!
Limited quantity, cost 180 rubles.
Hello andrews
and> is it possible to make Turbo Sound FM for developers for the new year
and> "Escape" by Census Group SPb? And maybe tell me the technology
and> to work with this for emulators...there is no board yet. Payment, by the way
and> you will have to somehow include it in the pussy while there is no Turbo 2+ in the form
and> laptop.
The Unreal emulator supports TS...
TS FM is not completely ready yet! How to work with it, not yet ready, soon
everything will be fine, right now we are working in parallel on the board (by me) and the editor (Shiru
Otaku).
Hello, CHRV
CHRV was at KidSoft, visiting the united group of Amizhniki and Kasik under
name (brand) ArtField.
The ATM board has also been discontinued (due to the end of the batch of boards - not
the ravings of some talkers). VISIT www.nedopc.com news.
Bare boards for self-assembly will be available from Maxagor (
http://atmturbo.nedopc.com). Maybe I’ll get him a couple of designers from
remaining parts.
And I will finish the long-term construction and do something fundamentally new.
Hello, CHRV
Thank you to everyone who writes letters to me (email and paper) with wishes and
recommendations.
All good and not so good ideas are taken into account. :v2_thumb:
Hello, CHRV
CHR> For now the main project is TS-FM
:(
Hello, CHRV
We are trying :) CHRV, and the VGA encoder is a very secret project, because... You're on the question
Are you not answering the subject at all? ;)
Hello, Evgeny Muchkin
Evg> We are trying :) CHRV, and the VGA encoder is a very secret project, because... Are you on
Evg> you don’t answer the question about the subject at all? ;)
As soon as I continue to work on it, I will notify everyone immediately.
For now the main project is TS-FM
Hello, Evgeny Muchkin
Unfortunately, the State Unitary Enterprise "Russian Post" again raised tariffs (more precisely, valuable parcels
now there is no, but there are only parcels - and they are more expensive).
Consequently, the cost of sending will increase by an average of 50 rubles.
Those who ordered before today will be sent at the old prices.
Prices on the website will be changed in the evening!
Hello, CHRV
We'll survive for the sake of the VGA encoder... :)