How much does it cost to produce several PCBs?

Hello, All Subject This means how much does it cost to produce one or more (1-5 pieces) printed circuit boards up to 25x20 cm in size according to a finished layout made, for example, in P-CAD the same. And where can this be done? The St. Petersburg offices are especially interesting. I just can’t imagine the scale of the prices. Please tell me if anyone encountered.

Hello, Evgeny Muchkin Evg> Subject. This means how much does it cost to produce one or more Evg> (1-5 pieces) printed circuit boards up to 25x20 cm in size, according to the finished layout, Evg> made, for example, in P-CAD, the same thing. Evg> And where can this be done? The St. Petersburg offices are especially interesting. Evg> Evg> I just can’t imagine the scale of prices. Please tell me Evg> if anyone has encountered this. I ordered boards from Rezonit and Skif. At Rezonit they do it quickly (urgent order - 4-5 days) and with high quality, but expensive. They already posted a link to Rezonit here, there is a calculator on their website, you can estimate the cost. Small batch of 5 pieces approximately 100x80 (double-sided green, with mask) cost 1900 rubles. In "Skif" they make it cheaply, slowly (3-4 weeks) and quite mediocre. Two boards measuring approximately 120x90 (double-sided yellow, without mask) cost about 800 rub.

Hello, tnt23 Purely for statistics. They do it in our design bureau. Approximately 150r/dm2 double-sided board with metallization without greenery. It will be more expensive with greenery. Order a photomask on film - 70 rubles per sheet A3. Accuracy - no higher than 0.2mm, if the photomask is on glass, then up to 0.1 is possible catch up. And another company generally orders boards from China.... They say it’s cheap, it’s true only large parties take

Hello, Evgeny Muchkin www.rezonit.ru

Hello Vitamin Thank you!! Only this rezonite ru does not open for me for some reason :(

Hello, Evgeny Muchkin http://www.rezonit.ru/pcb/production/home/ Technological capabilities: Dimensions of the workpiece, max H 530 x 390 mm. The minimum conductor width is 0.25 mm. Distance between board elements, min H 0.25 mm. The minimum diameter of the metallized hole is 0.50 mm. The ratio of hole height to diameter is 4:1 The minimum difference between the diameters of the pad and the hole is 0.6mm. The thickness of copper foil is 18, 35, 50, 70, 105 microns. Marking (gridography), resolution H 0.25 mm. Contour processing - guillotine, milling, scribing, stamping. Prices for printed circuit board production in Russia Order volume of boards in dm2 Type of PP Preparation Minimum order cost Up to 20 Up to 50 Up to 100 Up to 300 Up to 500 Up to 1000 >1000 OPP 550 510 74.00 52.00 49.00 46.00 43.00 41.00 39.00 OPP+M 800 590 85.00 59.00 56.00 53.00 50.00 49.00 47.00 OPP+M+Sh 1050 640 92.00 66.00 63.00 60.00 57.00 55.00 52.00 DPP 850 590 84.50 63.50 61.50 59.50 58.00 57.00 54.00 DPP+M 1100 700 100.00 79.00 77.00 75.00 73.00 71.00 68.50 DPP+M+Sh 1300 770 110.00 85.00 81.00 78.00 76.00 74.50 72.50 DPP+M+2Sh 1500 810 116.00 94.00 87.00 82.00 80.00 77.00 75.00 All prices are indicated in rubles including VAT If the printed circuit board area is less than 0.3 dm2, the cost of dm2 increases by the following coefficients: less than 0.1 dm2 H 3.0 from 0.1 dm2 to 0.2 dm2 H 2.0 from 0.2 dm2 to 0.3 dm2 Ch 1.4This coefficient can be excluded if the printed circuit boards are left in the composition multi-boards (for rectangular boards, processing options are scribing and milling with jumpers, for boards with complex shapes jumpers). -+------- i.e. simple DPP - preparation 850 RUR + (85 RUR/dm2, minimum 590 RUR)