Help with the programmer — ZXNet «hardware.zx»

From Aleksey Naboka To All 5 February 2006

Hello, All Greetings everyone!!! Help...... I have a native Scorpio PROSCO programmer, but something is wrong with him. When I'm trying to read pure bullshit I get some kind of gibberish, if I write something, it’s 2,3,4, bits are inverted, the programmer was like this from scratch. I've already checked everything in it, my brain is ALREADY BOILING :confused: I don’t know what to do anymore. Congratulations to everyone on the past holidays.

From Konstantin Zhukov To All 6 February 2006

Hello, hardy har> That's the problem, there is no diagram. Then check the levels of the OE, CS, PGM signals in read/write modes. B Is the programmer using BB55? Check if the voltage level is sufficient programming (for most bourgeois IMS, 12.5V is enough). What type Are you using ROM chips?

From Aleksey Naboka To All 9 March 2006

Hello, Jukov Yes, it contains KR580VV55a. The programming voltage seems to be normal. And ims I mainly use bourgeois 2764-274000.

From Konstantin Zhukov To All 9 March 2006

Hello, hardy You need to try to program BB55 to record from BASIC. For this you need to find out which ports are used in the programmer. You can see according to his diagram (first of all, find out what signals go to pins 9,8,6,5,36 BB55) or view the program that supports this programmer (search write/read codes to ports along with input parameters).

From Victor Ronin To All 9 March 2006

Hello, Jukov look for snot, sticking, breaks. I also have prosco 2.1 - it works fine on Kai.